JapanCert はIT業界に認定試験大綱の主要なサプライヤーとして、専門家は一緻して品質の高い商品を開発し続けています。
Alcatel-Lucentの4A0-M01認定試験を一回合格するためには必ず良い準備しなければなりません。完全な知識がこの高度専門の試験に合格するのは必要でJapanCertは君にこれらの資源を完全な需要に備わっています。
試験番号：4A0-M01問題集
試験科目：Alcatel-Lucent 「Alcatel-Lucent IP/MPLS Mobile Backhaul Transport」
最近更新時間：2013-09-17
問題と解答：150
JapanCertはもっぱらITプロ認証試験に関する知識を提供するのサイトで、ほかのサイト使った人はJapanCertが最高の知識源サイトと比較しますた。JapanCertの商品はとても頼もしい試験の練習問題と解答は非常に正確でございます。
IT業種のAlcatel-Lucentの4A0-M01認定試験に合格したいのなら、JapanCert Alcatel-Lucentの4A0-M01試験トレーニング問題集を選ぶのは必要なことです。Alcatel-Lucentの4A0-M01認定試験に受かったら、あなたの仕事はより良い保証を得て、将来のキャリアで、少なくともIT領域であなたの技能と知識は国際的に認知され、受け入れられるです。これも多くの人々がAlcatel-Lucentの4A0-M01認定試験を選ぶ理由の一つです。その理由でこの試験はますます重視されるになります。JapanCert Alcatel-Lucentの4A0-M01試験トレーニング資料はあなたが上記の念願を実現することを助けられるのです。JapanCert Alcatel-Lucentの4A0-M01試験トレーニング資料は豊富な経験を持っているIT専門家が研究したもので、問題と解答が緊密に結んでいますから、比べるものがないです。高い価格のトレーニング授業を受けることはなくて、JapanCert Alcatel-Lucentの4A0-M01試験トレーニング資料をショッピングカートに入れる限り、我々はあなたが気楽に試験に合格することを助けられます。
なんで悩んでいるのですか。Alcatel-Lucentの4A0-M01認定試験にどうやって合格するかということを心配していますか。確かに、4A0-M01認定試験に合格することは困難なことです。しかし、あまりにも心配する必要はありません。試験に準備するとき、適当な方法を利用する限り、楽に試験に合格することができないわけではないです。では、どんな方法が効果的な方法なのかわかっていますか。JapanCertの4A0-M01問題集を使用することが最善の方法の一つです。JapanCertは今まで数え切れないIT認定試験の受験者を助けて、皆さんから高い評判をもらいました。この問題集はあなたの試験の一発合格を保証することができますから、安心に利用してください。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.japancert.com/4A0-M01.html
NO.1 Click on the exhibit.
The command result indicates which condition on the Inverse Multiplexing over ATM (IMA) bundle?
A. The number of active links has dropped belowthe minimum threshold
B. The associated Layer 3 interface is administratively down
C. The remote IMA bundle is administrativelydown
D. The parent OC-3 is operationally down
Answer: C
Alcatel-Lucent参考書 4A0-M01 4A0-M01 4A0-M01練習問題
NO.2 Click on the exhibit.
Consider the topology and MLS1 configuration shown, and given the following conditions:
-MLS1 delivers the PRC traceable clock to the network
-Reference 1 receives Quality Level (QL) - ST3
-Reference 2 receives QL - DUS
-BITS sets QL-STU
Which quality level will MLS1 deliver to POC2-1 on its Synchronous Ethernet (SyncE) port 1/2/7?
A. QL-EEC2
B. QL-PRS
C. QL-ST3
D. QL-STU
Answer: C
Alcatel-Lucent認証試験 4A0-M01 4A0-M01認定証 4A0-M01
NO.3 Click on the exhibit.
Given the following:
On the OC-3 port, each provisioned channel group contains all available timeslots.
The command result illustrates which circuit status?
A. The E1 channel group is administratively turned down
B. The DS1 circuit physical link is operationally down
C. The IMA bundle has no operational member links
D. The associated Layer 3 interface is operationallydown
Answer: B
Alcatel-Lucent 4A0-M01認定証 4A0-M01 4A0-M01 4A0-M01
NO.4 Which synchronization technique supports time of day and phase synchronization?
A. IEEE 1588 v2/Precision Time Protocol (PTP)v2
B. Adaptive Clock Recovery (ACR)
C. Time Division Multiplexing (TDM) line timing
D. Synchronization Ethernet (SyncE)/Synchronization Status Message (SSM)
Answer: A
Alcatel-Lucent 4A0-M01 4A0-M01 4A0-M01認定試験
NO.5 Click on the exhibit.
Given the show command results shown:
Which IEEE 1588v2/Precision Time Protocol (PTP) v2 parent clock value does the slave first consider
when choosing its master?
A. GM Clock Priority1
B. GM Clock ID
C. GM Clock Priority2
D. GM Clock Class
Answer: D
Alcatel-Lucent認定試験 4A0-M01過去問 4A0-M01 4A0-M01
NO.6 Which statement correctly describes the Point-to-Point (PPP) Multilink Protocol (MP) negotiation
process?
A. At least one link must complete Link Control Protocol (LCP) negotiations before the bundle can
initialize
B. The endpoints indicate their desire to implement MP in the link Network Control Protocol (NCP) phase
C. The bundle must complete LCP negotiations before it can enter the NCP negotiation phase
D. Internet Protocol-Control Protocol (IPCP) negotiations must succeed for the bundle links to initialize
Answer: A
Alcatel-Lucent 4A0-M01練習問題 4A0-M01 4A0-M01認定証 4A0-M01参考書
NO.7 Click on the exhibit.
Consider the topology and MLS1 configuration shown, and given the following conditions:
* MLS1 delivers the PRC traceable clock to the network
* Reference 1 receives Quality Level (QL) - EEC1
* Reference 2 receives QL - SSU-A
* BITS sets QL-SSU-B
Which quality level will MLS1 deliver to POC2-1 on its Synchronous Ethernet (SyncE) port 1/2/7?
A. QL-EEC1
B. QL-PRC
C. QL-SSU-A
D. QL-STU
Answer: B
Alcatel-Lucent 4A0-M01参考書 4A0-M01 4A0-M01認定試験
NO.8 Click on the exhibit.
Given the show command results shown:
With what IEEE 1588v2/Precision Time Protocol (PTP) v2 message did the slave node set the Unicast
message rates used by the master?
A. Announce granted
B. Announce request
C. Sync granted
D. Sync request
Answer: B
Alcatel-Lucent認定資格 4A0-M01 4A0-M01 4A0-M01認定資格
NO.9 If an IEEE 1588v2/Precision Time Protocol (PTP) v2 slave times out announce messages with the
master, to which state does the slave port transition to choose another potential master?
A. Initial
B. Listening
C. Passive
D. Un-calibrated
Answer: B
Alcatel-Lucent認定資格 4A0-M01認証試験 4A0-M01参考書 4A0-M01
NO.10 An SROS router obtains its timing exclusively from its BITS input port. The router sets Quality Level
(QL) SONET Traceability Unknown (STU) on this Superframe (SF) framed DS1 BITS reference.
What must you configure on this master router to pass the best clock quality level to the downstream
Synchronous Ethernet (SyncE) slave nodes while maintaining traceability to the DS1 source?
A. Enable "ql-override prs" on the BITS reference
B. Enable "ql-override prs" on the master's SyncE ports
C. Enable "ql-selection prs" on the BITS reference
D. Set the master router to choose its source by quality level
Answer: A
Alcatel-Lucent認定試験 4A0-M01 4A0-M01 4A0-M01練習問題 4A0-M01認定資格
NO.11 Which messages, periodically sent between an IEEE 1588v2/Precision Time Protocol (PTP) v2 master
and slave, serve as hellos to help the slave choose the best available master?
A. Announce
B. Announce_grant
C. Sync
D. Delay_response
Answer: A
Alcatel-Lucent参考書 4A0-M01 4A0-M01練習問題 4A0-M01認定証 4A0-M01
NO.12 Which timing technique can deliver time of day and phase synchronization information to the base
station without concern for Packet Delay Variation (PDV)?
A. Building Integrated Timing Supply (BITS)
B. Global Positioning System (GPS)
C. Adaptive Clock Recovery (ACR)
D. IEEE 1588v2/Precision Time Protocol (PTP)
Answer: B
Alcatel-Lucent 4A0-M01認証試験 4A0-M01認証試験 4A0-M01認証試験 4A0-M01
NO.13 In the Alcatel-Lucent SROS, which payload type set in a SDH-framed OC-12 port creates individual E1
containers?
A. Virtual Tributary (VT) 1.5
B. VT2
C. Virtual Container (VC)-11
D. VC-12
Answer: B
Alcatel-Lucent 4A0-M01 4A0-M01認定資格 4A0-M01 4A0-M01過去問 4A0-M01
NO.14 In the Alcatel-Lucent SROS, which command creates the OC-3 path's Administrative Unit (AU)-4 Virtual
Container (VC) capacity?
A. configure port 3/1/2 sonet-sdh path au-4
B. configure port 3/1/2 sonet-sdh path sts3
C. configure port 3/1/2 sonet-sdh path tug-3
D. configure port 3/1/2 sonet-sdh path vc-4
Answer: B
Alcatel-Lucent認定資格 4A0-M01 4A0-M01練習問題
NO.15 The IETF is know for which standardization effort.?
A. It develops recommendations for core network functionality, broadband service delivery and next
generation services
B. It maintains Requests for Comment (RFC) that describe technical solutions to Internet challenges
C. It creates single, integrated network design guidelines to support mobile broadband services
D. It develops radio access services and systems for high capacity mobile networks
Answer: B
Alcatel-Lucent問題集 4A0-M01 4A0-M01認証試験 4A0-M01
NO.16 Which statement best describes adaptive timing techniques?
A. Adaptive timing calculates the time of day from time stamped packets
B. Adaptive timing calculates the time of day from the arriving packet rate
C. Adaptive timing only supports frequency synchronization
D. Adaptive timing only operates on point-to-point links
Answer: A
Alcatel-Lucent 4A0-M01問題集 4A0-M01認定資格 4A0-M01
NO.17 When researching carrier-class Ethernet standards to support the mobile backhaul Ethernet transport,
which standards body would you consult?
A. IEEE
B. MEF
C. ITU-T
D. NGMN
Answer: B
Alcatel-Lucent 4A0-M01認定資格 4A0-M01参考書
NO.18 Which is a characteristic of the IEEE 802.3 Slow Protocol?
A. There are a maximum of 10 frames transmitted per second
B. There are a maximum of 20 slow protocol subtypes per interface
C. The maximum slow protocol frame size is 64 bytes
D. The slow protocol header carries the clock quality level
Answer: A
Alcatel-Lucent 4A0-M01問題集 4A0-M01 4A0-M01練習問題 4A0-M01問題集 4A0-M01認定資格
NO.19 Click on the exhibit.
On the OC-3 port, each provisioned channel group contains all available timeslots
The command result illustrates which OC-3 port characteristic?
A. On STS1-1,the second VT1.5 in the second VTG is set for IPCP encapsulation
B. On STS1-1,the second DS1 channel group in the second VTG isoperationallyup
C. On STS1-1, the second E1 channel group in the second TUG-2 is operationally up
D. On STS1-1, the second VT2 in the second TUG-2 is set for IPCP encapsulation
Answer: C
Alcatel-Lucent問題集 4A0-M01参考書 4A0-M01 4A0-M01認定資格 4A0-M01
NO.20 Click on the exhibit.
Given the configuration shown and the following conditions:
* The external reference is offline
* Reference 1 receives Quality Level (QL) - EEC1
* Reference 2 receives QL - SSU-A
Which quality level will the SAR router advertise to its Synchronous Ethernet (SyncE) peers?
A. QL-DNU
B. QL-EEC1
C. QL-SSU-A
D. QL-PRC
E. QL-UNC
Answer: B
Alcatel-Lucent 4A0-M01過去問 4A0-M01認定試験
JapanCertは最新の70-467問題集と高品質の000-652問題と回答を提供します。JapanCertのLOT-442 VCEテストエンジンとBCP-340試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質のHP2-W100 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。
没有评论:
发表评论