あなたの目標はとても高いですから、あなたに色々なヘルプをあげられる資料が必要です。JapanCert HPのHP0-P21試験問題集はあなたが自分の目標を達成することを助けられます。JapanCert HPのHP0-P21問題資料は高度に認証されたIT領域の専門家の経験と創造を含めているものです。当社の製品は、すべての可能性のある問題を試させられます。受験生の皆様に問題の１００パーセント真実な解答を提供することを保証します。
HP HP0-P21認証試験に合格することが簡単ではなくて、HP HP0-P21証明書は君にとってはIT業界に入るの一つの手づるになるかもしれません。しかし必ずしも大量の時間とエネルギーで復習しなくて、弊社が丹精にできあがった問題集を使って、試験なんて問題ではありません。
試験番号：HP0-P21問題集
試験科目：HP 「HP-UX 11i v3 Advanced System Administration」
最近更新時間：2013-09-18
問題と解答：124
HPのHP0-P21認定試験は今IT業界の人気試験で多くのIT業界の専門の人士がITの関連の認証試験を取りたいです。HPの認証試験の合格書を取ってから更にあなたのIT業界での仕事にとても助けがあると思います。
JapanCertに提供されている資料はIT認定試験に対して10年過ぎの経験を持っているプロフェッショナルによって研究と実践を通じて作成し出されたものです。JapanCertは最新かつ最も正確な試験HP0-P21問題集を用意しておきます。JapanCertは皆さんの成功のために存在しているものですから、JapanCertを選択することは成功を選択するのと同じです。順調にIT認定試験に合格したいなら、JapanCertはあなたの唯一の選択です。
JapanCertのHP0-P21試験参考書は他のHP0-P21試験に関連するする参考書よりずっと良いです。これは試験の一発合格を保証できる問題集ですから。この問題集の高い合格率が多くの受験生たちに証明されたのです。JapanCertのHP0-P21問題集は成功へのショートカットです。この問題集を利用したら、あなたは試験に準備する時間を節約することができるだけでなく、試験で楽に高い点数を取ることもできます。
JapanCertのHPのHP0-P21問題集を買う前に、一部の問題と解答を無料に試用することができます。そうすると、JapanCertのHPのHP0-P21トレーニング資料の品質をよく知っています。JapanCertのHPのHP0-P21問題集は絶対あなたの最良の選択です。
JapanCertの専門家チームは彼らの経験と知識を利用して長年の研究をわたって多くの人は待ちに待ったHPのHP0-P21認証試験について教育資料が完成してから、大変にお客様に歓迎されます。JapanCertの模擬試験は真実の試験問題はとても似ている専門家チームの勤労の結果としてとても値打ちがあります。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.japancert.com/HP0-P21.html
NO.1 What are valid statements when referring to changing system run levels? (Select two.)
A. Run level 1 is the same as single user mode.
B. Run level 5 is the default run level for newly installed servers.
C. The init command can be used to interactively change run levels.
D. Default networking is started in run level 1.
E. The command shutdown can place the system in single user mode.
Answer: CE
HP HP0-P21 HP0-P21
NO.2 Your /home file system mounted on /dev/vg01/lvol4 is running out of space. Which command
should you use to determine which directory has the largest files?
A. du -k /dev/vg01/lvol4
B. du -ak /home
C. du -as /home
D. du -a /dev/vg01/lvol4
Answer: B
HP HP0-P21 HP0-P21過去問
NO.3 Which file do you edit in order to change the behavior of the syslogd daemon?
A. /etc/syslogd.conf file
B. /etc/syslog.conf file
C. /etc/rc.config.d/syslogd.conf file
D. /var/adm/syslog.conf file
Answer: B
HP問題集 HP0-P21 HP0-P21
NO.4 Management purchases an Integrity Superdome to replace two HP rp8420 Servers. There is available
CPU capacity and management decides to bring additional applications for execution on the Integrity
Superdome. Based on this scenario, which statements can be true? (Select two.)
A. Some of the applications are Linux-based and Linux applications are not supported to run on an
Integrity Superdome.
B. Some of the applications are Linux-based and Linux applications will run in an HP Integrity Virtual
Machine on an Integrity Superdome.
C. Some of the applications are Windows-based that run alongside HP-UX applications in a different
vPar inside of an Integrity Superdome.
D. Some of the applications are Windows-based that run alongside HP-UX applications in a different
nPar inside of an Integrity Superdome.
Answer: BD
HP練習問題 HP0-P21 HP0-P21 HP0-P21認定資格
NO.5 Which command should you use to determine the status of a LUN path?
A. ioscan
B. scsimgr
C. olrad
D. rad
Answer: A
HP HP0-P21 HP0-P21
NO.6 Which statements are true about threads and processes for a system running HP-UX? (Select three.)
A. A thread can have multiple processes.
B. The kernel parameter max_thread_proc defines the maximum number of concurrent threads
allowed per process.
C. A thread can be killed using the kill command.
D. The kernel parameter nkthread limits the number of threads allowed to run simultaneously,
system-wide.
E. A process can have multiple threads.
F. A thread is similar to a process, but cannot be switched to a different CPU.
Answer: BDE
HP認定資格 HP0-P21参考書 HP0-P21問題集
NO.7 What are the key benefits of the 11i v3 Mass Storage Stack? (Select two.)
A. improved security capabilities
B. dramatic I/O performance improvements
C. improved PVLinks for multipathing
D. simplified management and automatic configuration
Answer: BD
HP参考書 HP0-P21 HP0-P21
NO.8 Which VxVM daemons need to be running for the volume manager to function correctly?
A. vxfsd, vxiod, vxvmd
B. vxfsd, vxiod, vxnotify
C. vxconfigd, vxdctl, vxiod
D. vxconfigd, vxiod, vxrelocd, vxnotify
Answer: D
HP過去問 HP0-P21 HP0-P21 HP0-P21
NO.9 You are performing an HP-UX cold installation using the advanced option. Which parameters can you
set on the System Menu tab.? (Select three.)
A. hostname
B. user passwords (non-root)
C. files systems
D. additional interfaces
E. software file sets
F. time zone
Answer: A, D, F
HP HP0-P21 HP0-P21 HP0-P21
NO.10 Which LVM feature does Service guard use?
A. delayed activation
B. inclusive activation
C. exclusive activation
D. temporary activation
Answer: C
HP HP0-P21認定証 HP0-P21 HP0-P21
NO.11 Which properties can be adjusted in the files of the directory /etc/default? (Select four.)
A. time zone
B. new user properties
C. volume manager properties
D. IP addresses for the network interfaces
E. password format policy
F. configuration of the ip_forwarding parameter
G. default kernel parameters
H. maximum sys log size
Answer: ABEH
HP HP0-P21 HP0-P21 HP0-P21認定資格
NO.12 You previously set up HP SIM to use username/password authentication with account "wbemacc"
for the WBEM protocol for all of your managed systems. Your site has a policy that user passwords
must change every three months. It also configures PAM to lock out an account after three invalid
password attempts. What are ways to specify a new password before re-running "Identify Systems"?
(Select two.)
A. Invoke mxwbemsub a -c wbemacc:newpass.
B. For each system, invoke mxnodesecurity -a -n <hostname> -p WBEM -c wbemacc:newpass.
C. Use the HP SIM Options->Protocol Settings->Global Protocol Settings menu item.
D. Select all the systems and use the HP SIM Options->Protocol Settings->System Protocol Settings
menu item.
Answer: BD
HP HP0-P21 HP0-P21
NO.13 What are the benefits of the Service guard Storage Management Suite on HP-UX 11i v3? (Select
two.)
A. enables Oracle ASM to run within a file system
B. maintains service levels through the integration with VSE
C. offers tighter integration of Veritas Cluster Server on HP-UX
D. allows for heterogeneous platform support with a single solution
E. enables Oracle RAC customers to get the manageability of a file system
F. provides a single storage management solution to manage all applications
Answer: B, E, F
HP認定資格 HP0-P21 HP0-P21 HP0-P21
NO.14 You have set up a Service guard cluster but received notification from network security that the
current configuration exposes remote user login risks and must be remediated. Which file should be
set up to eliminate the risk?
A. /etc/hosts.equiv
B. /etc/cmcluster/cmclconfig
C. $HOME/.rhosts
D. /etc/cmcluster/cmclnodelist
Answer: D
HP問題集 HP0-P21 HP0-P21認証試験 HP0-P21認定試験 HP0-P21
NO.15 What is a characteristic of the Memory File System (MemFS)?
A. It supports /tmp and /var/tmp to be used as a MemFS.
B. It swaps data to swap space when the system is under memory pressure.
C. It uses disk devices to store compressed data.
D. Data in MemFS remain persistent after unmounts and reboots.
Answer: B
HP問題集 HP0-P21 HP0-P21認定資格 HP0-P21 HP0-P21
NO.16 Which command should you run to look at the detailed status of a package called pkg1?
A. cmgetconf -v pkg1
B. cmviewconf -v pkg1
C. cmquerycl -v pkg1
D. cmviewcl -v -p pkg1
Answer: D
HP HP0-P21練習問題 HP0-P21
NO.17 What are the major advantages of the new Mass Storage Stack of HP-UX 11i v3 compared to
previous HP-UX versions? (Select two.)
A. Device Files are bound to Physical Hardware Paths or LUNs.
B. A significantly larger number of devices can be connected to a single system.
C. When moving devices to different FC switch ports, manual intervention during LVM configuration
is not required.
D. The I/O paths switch transparently in the event of a failure.
E. The Agile Device Files are based on the LUN world wide ID (WWID) address.
Answer: BE
HP参考書 HP0-P21 HP0-P21
NO.18 Which functions does the idisk command perform? (Select two.)
A. lists the EFI partition table on a disk
B. creates a new partition table based on the /tmp/idtable file
C. validates the EFI partition information
D. allows the creation of up to 16 partitions
E. lists the usable blocks available for partitioning
Answer: AC
HP認証試験 HP0-P21 HP0-P21
NO.19 You just installed a new HP-UX server named wildcat on your company intranet. You have Ignite-UX
running on a server named ignite_server. What must you do to create a recovery image for the new
server? (Select two.)
A. Ensure the new server has sufficient space in /var.
B. Install Ignite-UX on wildcat.
C. Check the log files in wildcat.
D. Run make_net_recovery -s ignite_server on wildcat.
E. Check the log files in ignite_server.
Answer: BD
HP HP0-P21練習問題 HP0-P21認定証
NO.20 Which kernel parameter defines the maximum amount of physical memory that can be used for
caching file I/O data?
A. bufpages
B. filecache_max
C. dbc_max_pct
D. nbuf
Answer: B
HP認定証 HP0-P21 HP0-P21 HP0-P21認証試験
JapanCertは最新のLOT-958問題集と高品質の000-596問題と回答を提供します。JapanCertの1Z0-807 VCEテストエンジンと00M-663試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質の70-341 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。
没有评论:
发表评论