JapanCertはOracleの1Z0-880認定試験にたいして短期で有効なウェブサイトで1Z0-880認定試験に合格するのを保証したり、Oracle認証試験に合格しなければ全額で返金いたします。あなたはJapanCertが提供した1Z0-880の認証試験の問題集を購入するの前にインターネットで無料な試用版をダウンロードしてください。
IT領域での主要な問題が質と実用性が欠くということを我々ははっきり知っています。JapanCertのOracleの1Z0-880の試験問題と解答はあなたが必要とした一切の試験トレーニング資料を準備して差し上げます。実際の試験のシナリオと一致で、选択問題（多肢選択問題）はあなたが試験を受かるために有効な助けになれます。JapanCertのOracleの1Z0-880の試験トレーニング資料は検証した試験資料で、JapanCertの専門的な実践経験に含まれています。
試験番号：1Z0-880問題集
試験科目：Oracle 「Oracle Solaris 10 Network Administrator Certified Expert Exam」
最近更新時間：2014-01-24
問題と解答：317
JapanCertはたくさんIT関連認定試験の受験者に利便性を提供して、多くの人がJapanCertの問題集を使うので試験に合格しますた。彼らはJapanCertの問題集が有効なこと確認しました。JapanCertが提供しておりますのは専門家チームの研究した問題と真題で弊社の高い名誉はたぶり信頼をうけられます。安心で弊社の商品を使うために無料なサンブルをダウンロードしてください。
チャンスは常に準備ができあがった者に属します。しかし、我々に属する成功の機会が来たとき、それをつかむことができましたか。Oracleの1Z0-880認定試験を受験するために準備をしているあなたは、JapanCertという成功できるチャンスを掴みましたか。JapanCertの1Z0-880問題集はあなたが楽に試験に合格する保障です。この問題集は大量な時間を節約させ、効率的に試験に準備させることができます。JapanCertの練習資料を利用すれば、あなたはこの資料の特別と素晴らしさをはっきり感じることができます。この問題集は間違いなくあなたの成功への近道で、あなたが十分に1Z0-880試験を準備させます。
JapanCertは1Z0-880認定試験に対する短期で有効な訓練を提供するウェブサイト、1Z0-880認定試験が生活の変化をもたらすテストでございます。合格書を持ち方が持たない人により高い給料をもうけられます。
JapanCertはあなたが完全に信頼できるウェブサイトです。受験生の皆さんをもっと効率的な参考資料を勉強させるように、JapanCertのIT技術者はずっとさまざまなIT認定試験の研究に取り組んでいますから、もっと多くの素晴らしい資料を開発し出します。一度JapanCertの1Z0-880問題集を使用すると、きっと二度目を使用したいです。JapanCertは最高の1Z0-880資料を提供するだけでなく、高品質のサービスも提供します。私達の資料についてどんなアドバイスがあってもお気軽に言ってください。受験生の皆さんを試験に合格させることを旨とするだけでなく、皆さんに最高のサービスを提供することも目標としています。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.japancert.com/1Z0-880.html
NO.1 The system administrator of a firewall running Solaris IP Filter writes an updated set of rules in
/root/newrules. Before implementing the rules, the rule set needs to be tested for syntax errors. Which
command accomplishes this?
A. inetadm restart svc:/network/ipfilter:/root/newrules
B. ipf -Fa -f /root/newrules
C. ipf -n -f /root/newrules
D. svcadm restart svc:/network/ipfilter:/root/newrules
Answer: C
Oracle 1Z0-880過去問 1Z0-880練習問題
NO.2 Given the following snoop trace:
sys4 -> sys10 NTP client [st=0] (2005-01-26 17:13:29.73040)
sys10 -> sys4 NTP server [st=4] (2005-01-26 17:15:08.79499)
sys4 -> sys10 NTP client [st=0] (2005-01-26 17:13:29.79606)
sys10 -> sys4 NTP server [st=4] (2005-01-26 17:15:08.86071)
sys4 -> sys10 NTP client [st=0] (2005-01-26 17:13:29.86199)
sys10 -> sys4 NTP server [st=4] (2005-01-26 17:15:08.92638)
sys4 -> sys10 NTP client [st=0] (2005-01-26 17:13:29.92734)
sys10 -> sys4 NTP server [st=4] (2005-01-26 17:15:08.99198)
Why do the system clocks remain unsynchronized despite several queries?
A. The NTP client requires more updates from the NTP server.
B. The NTP client is configured as a broadcast client.
C. The NTP server daemon is disabled.
D. The /etc/init/ntp.client file is misconfigured.
Answer: A
Oracle認定証 1Z0-880 1Z0-880練習問題 1Z0-880
NO.3 A Solaris 10 OS server has packet filtering enabled. Which command displays information on stdout
regarding packets that match rules?
A. syslogd -d sysout
B. ipmon
C. ipf -l block
D. netstat -a block
Answer: B
Oracle認定資格 1Z0-880認定資格 1Z0-880過去問 1Z0-880
NO.4 Click the Exhibit button.
You have configured a JumpStart server. When you attempt to install a client machine, it starts booting,
but stops responding shortly afterwards.
Which command, when run on the JumpStart server, helps diagnose this problem?
A. snoop 8:0:20:fd:e9:3c
B. ndd -get /dev/eri0 errors
C. /usr/sbin/in.rarpd -d -a
D. snoop -d eri0
E. snoop dhcp
Answer: A
Oracle問題集 1Z0-880問題集 1Z0-880認定試験 1Z0-880問題集
NO.5 DRAG DROP
Click the Task button.
Place each frame error on its description.
Answer:
NO.6 You want to modify the failure detection time for IPMP so that failures are detected more quickly on the
IPMP group containing the IPv6 interface eri0. Which file you do edit?
A. /kernel/drv/ipmp.conf
B. /etc/default/mpathd6
C. /kernel/drv/ipmp6.conf
D. /etc/default/mpathd
E. /etc/hostname6.eri0
Answer: D
Oracle認証試験 1Z0-880 1Z0-880 1Z0-880参考書 1Z0-880
NO.7 The TCP protocol has an algorithm that implements flow control on both the sender side and the
receiver side. What is the function of the congestion window on the sending side?
A. adjusts the rate at which data can be sent
B. advertises the maximum amount of data that can be received
C. advertises the maximum amount of data that can be sent
D. advertises the amount of data loss
E. adjusts the rate at which data can be received
Answer: A
Oracle 1Z0-880 1Z0-880認定試験
NO.8 The system administrator needs to configure a static, default route to 192.168.0.1. The netmask is
255.255.255.240. Which two commands are used to ensure that the default route is installed immediately
and at the next reboot? (Choose two.)
A. route add default 192.168.0.1
B. routeadm -u -a default 192.168.0.1
C. echo 192.168.0.1/25 > /etc/defaultrouter
D. routeadm add default -netmask 255.255.255.240 192.168.0.1
E. echo 192.168.0.1 > /etc/defaultrouter
Answer: A,E
Oracle過去問 1Z0-880認定証 1Z0-880参考書 1Z0-880認証試験 1Z0-880
NO.9 An administrator is setting up the new Solaris platform server, logger, and has forgotten the
appropriate mail relay server to use for this subnet.
# cat /etc/resolv.conf
domainname central.company.com
nameserver 170.63.2.10
nameserver 163.120.15.10
Which command can the administrator use to discover this information?
A. cat /etc/nsswitch.conf
B. nsloookup type=A logger.central.company.com
C. dig -relay 163.120.15.10
D. dig central.company.com mx
E. dig mailrelay logger.central.company.com
Answer: D
Oracle 1Z0-880練習問題 1Z0-880問題集 1Z0-880
NO.10 Click the Exhibit button.
A system on your network is named sys-01. This system has Solaris 10 OS with packet filtering enabled
and configured. The Solaris IP Filter configuration, stored in the /etc/ipf/ipf.conf file of this system was:
pass in quick proto tcp from any to any port = 22 keep state block in all and allowed an ssh connection
into your sys-01 system from both hme0 and hme1 interfaces. Due to a change in your network, you had
to modify the packet filtering rules of the sys-01 system. The packet filtering rules now allow ssh
connections into sys-01 only using the hme0 interface. The following changes are made to /etc/ipf/ipf.conf:
pass in quick on hme0 proto tcp from any to 192.168.1.1/32
port = 22 keep state block in all
Which command loads the new packet filtering rules?
A. ipmon -f /etc/ipf/ipf.conf
B. ipf -Fo -f /etc/ipf/ipf.conf
C. ipf -Fa -f /etc/ipf/ipf.conf
D. ippool -Fa -f /etc/ipf/ipf.conf
E. ipf -f /etc/ipf/ipf.conf
Answer: C
Oracle認定資格 1Z0-880認定試験 1Z0-880練習問題 1Z0-880
NO.11 Company A owns, and is authoritative, for the domain aco.com. Company A is in the process of
consolidating systems as a result of the purchase of Company B. As part of this transition effort, network
administrators have configured Company A's DNS server zone files to include and become authoritative
for Company B's bco.com domain. The administrators want to turn off Company B's DNS servers. Which
two steps should be completed prior to this shutdown? (Choose two.)
A. initiate zone transfer to A.root-servers.net
B. create an aco.com to bco.com reverse zone configuration file
C. reduce the TTL value for the aco.com domain
D. require hosts on bco.com to update the IP address used for DNS resolution
E. update the .com Top-Level name server entries for bco.com
Answer: D,E
Oracle 1Z0-880 1Z0-880練習問題 1Z0-880 1Z0-880
NO.12 The TCP protocol has an algorithm that implements flow control on both the sender side and the
receiver side. What is the function of the congestion window on the sending side?
A. advertises the maximum amount of data that can be sent
B. advertises the maximum amount of data that can be received
C. advertises the amount of data loss
D. adjusts the rate at which data can be sent
E. adjusts the rate at which data can be received
Answer: D
Oracle 1Z0-880 1Z0-880練習問題
NO.13 A host's IPv6 link-local unicast address is based on the host's Ethernet address. A 16-bit code is
inserted in the 64-bit Interface ID portion of the IPv6 address to enable a 48-bit Ethernet address to
become 64 bits in length. Which value represents this added 16-bit code?
A. FFFF
B. FFEE
C. FFFE
D. FE80
E. FEC0
Answer: C
Oracle 1Z0-880 1Z0-880
NO.14 A system is being configured as a network boot server. Which three must be present or online for the
boot server to successfully answer RARP requests? (Choose three.)
A. /etc/inet/hosts
B. /etc/ethers
C. svc:/network/ethers
D. /etc/resolv.conf E. svc:/network/rarp
Answer: A,B,E
Oracle問題集 1Z0-880認証試験 1Z0-880 1Z0-880
NO.15 Protocols are used by computer networks to communicate or exchange data. A data
communication protocol is a set of rules that must be followed by electronic devices to
communicate with each other. Which three describe these sets of rules? (Choose three.)
A. Transport - Manages the connections between cooperating applications
B. Timing - Speed matching and sequencing
C. Application - Handles the detail and functions
D. Internet - Manages data addressing
E. Syntax - Data format and coding
F. Semantics - Controls information and error handling
Answer: B,E,F
Oracle認定証 1Z0-880 1Z0-880過去問 1Z0-880 1Z0-880
NO.16 Given the following output:
Routing Table: IPv4
Destination Gateway Flags Ref Use Interface
192.168.1.0 192.168.1.1 U 1 0 hme0
224.0.0.0 192.168.1.1 U 1 0 hme0
default sys-gw UG 1 0 127.0.0.1 127.0.0.1 UH 2 6 lo0
This output shows that the system has a default gateway set. How can the default gateway be set?
A. set by in.routed through the RDISC protocol
B. set manually through: route add sys-gw default
C. set by inetd through the use of configuration text files
D. set through the command: routeadm add default -UG sys-gw
Answer: A
Oracle 1Z0-880問題集 1Z0-880 1Z0-880
NO.17 You want to configure the hme0 interface with an IPv6 address and the prefix fec0. Which two
configurations achieve this? (Choose two.)
A. The file /etc/hostname6.hme0:1 contains a host name, which is defined in the /etc/hosts file.
This entry has an IPv6 address prefix of fec0.
B. The file /etc/hostname6.hme0:1 contains a host name, which is defined in the /etc/inet/ipnodes file.
This entry has an IPv6 address prefix of fec0.
C. The file /etc/hostname6.hme0 contains an addif hostname entry in addition to the normal host name.
This cross-references an entry in /etc/inet/ipnodes with IPv6 address prefix fec0:.
D. The file /etc/hostname6.hme0 contains a host name defined in the /etc/inet/ipnodes file. This entry has
an IPv6 address prefix of fec0.
Answer: B,C
Oracle 1Z0-880 1Z0-880 1Z0-880認定証 1Z0-880
NO.18 While making configuration changes on your DHCP server, you want to test the changes on a Solaris
OS workstation, which is configured as a DHCP client. Rather than rebooting the client or waiting for the
DHCP lease to expire, which command can you use to cause the workstation to re-query the DHCP
server?
A. dhcpagent -f
B. ifconfig hme0 down; ifconfig hme0 up
C. ifconfig hme0 dhcp release; ifconfig hme0 dhcp start
D. This cannot be done. You must reboot.
E. svcadm restart dhcpagent
Answer: C
Oracle 1Z0-880 1Z0-880 1Z0-880参考書
NO.19 A section of the ifconfig -a command is run on a Solaris system with Probe-Based IPMP configured as
follows:
hme0:1:
flags=9040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPV4,NOFAILOVER>
mtu 1500 index 2 inet 192.168.1.51 netmask ffffff00 broadcast 192.168.1.255
The address shown is marked as deprecated.
In which two situations are addresses that are marked deprecated used as source addresses for
outbound packets? (Choose two.)
A. when the system acts as a router
B. when there are no other addresses available in the interface group
C. when a TCP connection is requested
D. when a static default router is configured for the system
E. when an application has been explicitly bound to the 192.168.1.51 address Answer: B,E
Oracle 1Z0-880認定資格 1Z0-880練習問題
NO.20 Click the Exhibit button.
You configure a 6to4 router, and try to communicate from system A to system B. The interfaces of the
source and destination systems are shown in the exhibit. Your ping:
systemA# ping -s fe80::203:baff:fe02:7aa5
yields:
ICMPv6 Address Unreachable from gateway 2002:8193:c9f::1
for icmp6 from 2002:8193:c9f::1 to fe80::203:baff:fe02:7aa5
What is the cause of the problem?
A. You did not add a default route for the IPv6 traffic.
B. You can NOT reach the system on the local link address.
C. You do not have a route to gateway 2002:8193:c9f::1.
D. The system you are pinging on does not have IPv6 configured.
Answer: B
Oracle認定試験 1Z0-880 1Z0-880問題集 1Z0-880 1Z0-880
NO.21 You configure an NTP server to use its local undisciplined clock and also an external server at address
192.20.20.1. Additionally, you create a fudge line:
fudge 127.127.1.0 stratum 12
Which is the purpose of the fudge line?
A. to ensure that the synchronization is checked at 12:00 P.M. each day
B. to ensure that the server's local clock is seen as a stratum 12 server
C. to make the xntpd daemon check the clients clock every 12 minutes
D. to ensure that only servers below stratum 12 are queried
Answer: B
Oracle過去問 1Z0-880練習問題 1Z0-880
NO.22 In the context of packet filtering, the Solaris IP Filter firewall provides a set of user level utility and
kernel modules. Which two are kernel modules of Solaris IP Filter? (Choose two.)
A. ipfs
B. ippool
C. ipmon
D. ipf
E. ipnat
F. pfil
Answer: D,F
Oracle練習問題 1Z0-880 1Z0-880過去問 1Z0-880参考書 1Z0-880
NO.23 Ethernet frames include a unique address indicating the source of the frame. What is this unique
address called?
A. IP address
B. Calling Party Address
C. MAC address
D. source VLAN
Answer: C
Oracle練習問題 1Z0-880 1Z0-880参考書 1Z0-880認定証
NO.24 A system administrator has configured a Solaris system to operate as an NTP server supporting peer
NTP servers and clients on a local subnet. The NTP configuration file contains the line: enable auth
What impact does this have on NTP behavior?
A. The network router must broadcast the NTP server IP address.
B. All NTP clients on the local subnet must be configured to support key negotiation.
C. The server is authoritative for a reference clock.
D. All NTP servers on the local subnet must be configured to support key negotiation.
E. Time adjustments are only be accepted by Stratum 0 servers.
Answer: D
Oracle 1Z0-880参考書 1Z0-880問題集 1Z0-880 1Z0-880
NO.25 You configure Solaris IP Filter on a Solaris system named myhost as a host-based firewall. While
attempting to telnet to myhost from another host named remotehost, you receive this error:
$ telnet myhost
Trying 192.168.1.100...
telnet: Unable to connect to remote host: Connection timed out
You run netstat -a on myhost and find this entry:
Local Address Remote Address Swind Send-Q Rwind Recv-Q State
myhost.23 remotehost.39846 0 0 49640 0 SYN_RCVD
What is the cause of this problem?
A. myhost and remotehost are on different networks.
B. The ipf kernel module is not loaded.
C. remotehost does not have a route to myhost.
D. Telnet is an insecure protocol and therefore Solaris IP Filter always blocks it.
E. myhost has a block out rule for traffic to remotehost.
Answer: E
Oracle 1Z0-880 1Z0-880参考書 1Z0-880問題集
NO.26 DRAG DROP
Click the Task button.
In the context of writing filtering rule sets for the Solaris 10 OS IP Filter firewall, complete the rule that
blocks outgoing ICMP echo replies on the qfe0 interface.
Use three options to complete the rule.
Answer:
NO.27 You have a requirement to configure two new network ranges. One of these networks requires 200 IP
addresses and the other requires 600 IP addresses. Which network should you use to obtain the most
efficient usage of IP address space.?
A. 10.12.60/24 and 10.12.48/21
B. 192.168.2/24 and 192.168.3.0/23
C. 10.10.10/24 and 192.168/16
D. 10.12.53/24 and 10.12.48/22
Answer: A
Oracle 1Z0-880練習問題 1Z0-880認定試験 1Z0-880認定試験 1Z0-880 1Z0-880
NO.28 DRAG DROP
Click the Task button.
The UDP Transport layer protocol receives data from the application and encapsulates the data in UDP
datagrams. UDP datagrams have a leading header section.
Place the items on the appropriate UDP header section.
Note: Only four items are used.
Answer:
NO.29 DRAG DROP
Click the Task button.
Place each network component on the layer at which it operates.
Answer:
NO.30 A newly installed system is experiencing network performance problems. You suspect it may be related
to the duplex or speed settings on the hme0 interface. Which two commands check the duplex and speed
of the hme0 interface? (Choose two.)
A. ndd -get /dev/hme duplex
B. netstat hme link_mode
C. netstat -I hme
D. ndd -get /dev/hme link_mode
E. ndd -get /dev/hme link_status
F. ndd -get /dev/hme link_speed
G. ndd -get /dev/hme speed Answer: D,F
Oracle 1Z0-880 1Z0-880問題集
JapanCertは最新のHP2-Z27問題集と高品質のM70-301問題と回答を提供します。JapanCertの000-784 VCEテストエンジンとLOT-407試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質の642-980 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。
没有评论:
发表评论