難しいNS0-163認定試験に合格したいなら、試験の準備をするときに関連する参考書を使わないとダメです。自分に合っている優秀な参考資料がほしいとしたら、一番来るべき場所はJapanCertです。JapanCertの知名度が高くて、IT認定試験に関連するいろいろな優秀な問題集を持っています。それに、すべてのNS0-163試験問題集に対する無料なdemoがあります。JapanCertのNS0-163問題集があなたに適するかどうかを確認したいなら、まず問題集のデモをダウンロードして体験してください。
逆境は人をテストすることができます。困難に直面するとき、勇敢な人だけはのんびりできます。あなたは勇敢な人ですか。もしIT認証の準備をしなかったら、あなたはのんびりできますか。もちろんです。 JapanCertのNetwork ApplianceのNS0-163試験トレーニング資料を持っていますから、どんなに難しい試験でも成功することができます。
全てのIT専門人員はNetwork ApplianceのNS0-163の認定試験をよく知っていて、その難しい試験に受かることを望んでいます。Network ApplianceのNS0-163の認定試験の認可を取ったら、あなたは望むキャリアを得ることができるようになります。JapanCertのNetwork ApplianceのNS0-163試験トレーニング資料を利用したら、望むことを取得できます。
弊社が提供した部分の資料を試用してから、決断を下ろしてください。もし弊社を選ばれば、１００％の合格率を保証でございます。
試験番号：NS0-163問題集
試験科目：Network Appliance 「Network Appliance Data Protection Solutions」
最近更新時間：2014-03-15
問題と解答：154
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.japancert.com/NS0-163.html
NO.1 Assume fabric-attached MetroCluster using hardware disk ownership. If the local node has its FC HBA
connected to switch bank 1, it owns the disks connected to switch bank ___.
A. 1
B. 2
C. 3
D. 4
Answer: B
Network Appliance認定資格 NS0-163 NS0-163 NS0-163認定資格 NS0-163問題集 NS0-163過去問
NO.2 Which Data ONTAP option sets system-wide throttling for all transfers?
A. options transfer.wide.enable
B. options transfer.throttle.enable
C. options replication.wide.enable
D. options replication.throttle.enable
Answer: D
Network Appliance認定試験 NS0-163過去問 NS0-163 NS0-163認証試験 NS0-163
NO.3 Which statement applies to the Open Systems SnapVault Free Space Estimator utility?
A. This utility run automatically after each transfer.
B. This utility must be enabled on the secondary storage system.
C. This utility determines if there is sufficient disk space available on the primary to perform an OSSV
transfer.
D. This utility determines if there is sufficient disk space available on the secondary to perform an OSSV
transfer.
Answer: C
Network Appliance NS0-163練習問題 NS0-163 NS0-163認定証 NS0-163
NO.4 Which system is recommended as a secondary system for SnapVault?
A. IS1200
B. DataFort
C. NearStore VTL
D. FAS with NearStore license
Answer: D
Network Appliance過去問 NS0-163 NS0-163 NS0-163
NO.5 Which command creates a new SyncMirror aggregate, letting Data ONTAP select the disk drives?
A. aggr create aggrX -d 12
B. aggr create aggrX -m 12
C. aggr mirror aggrX -m 12
D. aggr mirror aggrX -n 12
Answer: B
Network Appliance認証試験 NS0-163認証試験 NS0-163認証試験 NS0-163
NO.6 Which command or procedure would you use to undo a volume SnapRestore operation?
A. snap restore -r <vol/snapshotname> vol <path_and_vol_name>
B. snap revert -s <vol/snapshotname> vol <path_and_vol_name>
C. snap restore undo vol <path_and_vol_name>
D. You cannot undo a SnapRestore operation at the volume level.
Answer: D
Network Appliance参考書 NS0-163問題集 NS0-163 NS0-163 NS0-163
NO.7 Which action will cause a currently in-sync SnapMirror relationship to fall out of sync?
A. Running snapmirror update on the source storage system
B. Running snapmirror release on the source storage system
C. Modifying the /etc/snapmirror.conf file for the relationship on the source storage system
D. Modifying the /etc/snapmirror.conf file for the relationship on the destination storage system
Answer: D
Network Appliance NS0-163認定証 NS0-163 NS0-163認定証
NO.8 The snapvault snap sched -x command is used to ____________.
A. schedule full backups
B. cancel scheduled backups
C. schedule baseline transfer
D. schedule incremental backups
Answer: D
Network Appliance NS0-163 NS0-163認定証 NS0-163
NO.9 A NearStore license increases the amount of concurrent replication streams.
A. True
B. False
Answer: A
Network Appliance NS0-163練習問題 NS0-163
NO.10 Which is true of the SnapVault backup of NetApp storage system?
A. The file is the basic unit for SnapVault backup destination.
B. The qtree is the basic unit for SnapVault backup destination.
C. The volume is the basic unit of SnapVault backup destination.
D. The directory is the basic unit for SnapVault backup destination.
Answer: B
Network Appliance NS0-163問題集 NS0-163
NO.11 Which three /etc/snapmirror.conf entries will support synchronous or semi-synchronous SnapMirror?
(Choose three.)
A. FilerA:source_vol FilerB:destination_vol - sync
B. FilerA:source_vol FilerB:destination_vol - 0-55/5 * * *
C. FilerA:source_vol FilerB:destination_vol outstanding=3s sync
D. FilerA:source_vol FilerB:destination_vol visibility_interval=1hr, outstanding=3ms, cksum=crc32 sync
Answer: ACD
Network Appliance認定資格 NS0-163 NS0-163認定資格 NS0-163参考書
NO.12 The ONTAP SnapVault primary license on the target storage system is required for Open System
SnapVault.
A. True
B. False
Answer: B
Network Appliance認定試験 NS0-163問題集 NS0-163 NS0-163認定試験
NO.13 A snapshot is a frozen, read-only image of the entire Data ONTAP active file system that reflects the
state of the ____________ at the time the snapshot was created.
A. qtrees
B. volume
C. directory
D. storage system
Answer: B
Network Appliance過去問 NS0-163認定証 NS0-163認定試験
NO.14 Which two choices are used to configure a semi-synchronous SnapMirror relationship? (Choose two.)
A. throttle
B. visibility interval
C. outstanding=3s in DOT 7.2
D. using option semi-sync in DOT 7.3 and higher
Answer: CD
Network Appliance NS0-163 NS0-163 NS0-163認定試験 NS0-163認定証 NS0-163
NO.15 Data ONTAP uses inodes in an active file system to reference ___________.
A. qtrees
B. disk blocks
C. file segments
D. Snapshot copies
Answer: B
Network Appliance NS0-163 NS0-163練習問題
NO.16 Which OSSV tool would you use to perform an OSSV unattended installation?
A. msipackage
B. svunattendossv
C. svconfigpackager
D. unattendpackager
Answer: C
Network Appliance過去問 NS0-163過去問 NS0-163過去問 NS0-163
NO.17 Which option will allow a storage system to SnapMirror from this source system?
A. snapmirror.access <destination_filer>
B. snapmirror.destination <destination_filer>
C. options snapmirror.allow host = <destination_filer>
D. options snapmirror.access host = <destination_filer>
Answer: D
Network Appliance問題集 NS0-163 NS0-163認定試験 NS0-163
NO.18 What is the correct format for the scheduling component of a SnapVault schedule?
A. YYYY-MM-DD
B. crontab format
C. cnt[@day_list][@hour_list]
D. List of dates in ISO Date format
Answer: C
Network Appliance NS0-163参考書 NS0-163 NS0-163問題集
NO.19 Before enabling an active/active configuration, you should verify and compare the configuration of the
nodes. Which tool can perform this task?
A. cf-config-check.cgi script
B. cf status command on both nodes
C. clustercheck script
D. Release Comparison Tool
Answer: A
Network Appliance NS0-163問題集 NS0-163練習問題 NS0-163参考書
NO.20 The SnapVault secondary system allows you to keep a separate schedule of Snapshot copies from
your primary system.
A. True
B. False
Answer: A
Network Appliance NS0-163 NS0-163練習問題 NS0-163認定証 NS0-163問題集
JapanCertは最新のC_BOWI_30問題集と高品質のC_FSUTIL_60問題と回答を提供します。JapanCertのHP2-N44 VCEテストエンジンと1D0-610試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質のLOT-406 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。
没有评论:
发表评论