夢を持ったら実現するために頑張ってください。「信仰は偉大な感情で、創造の力になれます。」とゴーリキーは述べました。私の夢は最高のIT専門家になることです。その夢は私にとってはるか遠いです。でも、成功へのショートカットがを見つけました。JapanCertのRedHatのRH-302試験トレーニング資料を利用して気楽に試験に合格しました。それはコストパフォーマンスが非常に高い資料ですから、もしあなたも私と同じIT夢を持っていたら、JapanCertのRedHatのRH-302試験トレーニング資料を利用してください。それはあなたが夢を実現することを助けられます。
JapanCertのRedHatのRH-302トレーニング資料は完璧な資料で、世界的に最高なものです。これは品質の問題だけではなく、もっと大切なのは、JapanCertのRedHatのRH-302試験資料は全てのIT認証試験に適用するもので、ITの各領域で使用できます。それはJapanCertが受験生の注目を浴びる理由です。受験生の皆様は我々を信じて、依頼しています。これもJapanCertが実力を体現する点です。我々の試験トレーニング資料はあなたが買いてから友達に勧めなければならない魅力を持っています。本当に皆様に極大なヘルプを差し上げますから。
人々はそれぞれ自分の人生計画があります。違った選択をしたら違った結果を取得しますから、選択は非常に重要なことです。JapanCertのRedHatのRH-302試験トレーニング資料はIT職員が自分の高い目標を達成することを助けます。この資料は問題と解答に含まれていて、実際の試験問題と殆ど同じで、最高のトレーニング資料とみなすことができます。
JapanCertは毎日24時間オンラインに顧客に対してサービスを提供するアフターサービスはとても良いサイトでございます。最新な情報を1年間に無料にアップデートしております。少ないお金をかかって、一回に合格しましょう。JapanCertの問題集は最大のお得だね！
試験番号：RH-302問題集
試験科目：RedHat 「Red Hat Certified Engineer on Redhat Enterprise Linux 5 (Labs)」
最近更新時間：2014-03-02
問題と解答：330
JapanCertは高品質の製品を提供するだけではなく、完全なアフターサービスも提供します。当社の製品を利用したら、一年間の無料更新サービスを提供します。しかも、速いスピードで受験生の皆様に提供して差し上げます。あなたがいつでも最新の試験資料を持っていることを保証します。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.japancert.com/RH-302.html
NO.1 The System you are using is for NFS (Network File Services). Some important data are shared from
your system. Make automatically start the nfs and portmap services at boot time.
Answer and Explanation:
We can control the services for current session and for next boot time also. For current Session, we use
service servicename start or restart or stop or status. For automatically on next reboot time:
1. chkconfig servicename on or off
eg: chkconfig nfs on
chkconfig portmap on
or
ntsysv
Select the nfs and portmap services.
2. Reboot the system and identify whether services are running or not.
RedHat認定試験 RH-302問題集 RH-302 RH-302問題集 RH-302
NO.2 mke2fs -j /dev/hda? To create ext3 filesystem.
RedHat認定試験 RH-302問題集 RH-302 RH-302問題集 RH-302
NO.3 /dev/hda? /mnt/neo ext3 defaults 1 2
RedHat認定試験 RH-302問題集 RH-302 RH-302問題集 RH-302
NO.4 Use mkfs -t ext3 /dev/hda? Where ? is your partition number
RedHat認定試験 RH-302問題集 RH-302 RH-302問題集 RH-302
NO.5 Verify by mounting on current Sessions also:
RedHat認定試験 RH-302問題集 RH-302 RH-302問題集 RH-302
NO.6 Type the Size: +100M-> You can Specify either Last cylinder of Size here.
RedHat認定試験 RH-302問題集 RH-302 RH-302問題集 RH-302
NO.7 Either Reboot or use partprobe command.
RedHat認定試験 RH-302問題集 RH-302 RH-302問題集 RH-302
NO.8 Set the Hostname station?.example.com where ? is your Host IP Address.
Answer and Explanation:
1. hostname station?.example.com This will set the host name only for current session. To set hostname
permanently.
2. vi /etc/sysconfig/network
HOSTNAME=station?.example.com
3. service network restart
RedHat認定試験 RH-302問題集 RH-302 RH-302問題集 RH-302
NO.9 Change the root Password to redtophat
Answer and Explanation:
1. Boot the system in Single user mode
RedHat認定試験 RH-302問題集 RH-302 RH-302問題集 RH-302
NO.10 Use the passwd command
2. Dig Server1.example.com, Resolve to successfully through DNS Where DNS server is 172.24.254.254
Answer and Explanation:
#vi /etc/resolv.conf
nameserver 172.24.254.254
#dig server1.example.com
#host server1.example.com
DNS is the Domain Name System, which maintains a database that can help your computer translate
domain names such as www.Redhat.com to IP addresses such as 216.148.218.197. As no individual
DNS server is large enough to keep a database for the entire Internet, they can refer requests to other
DNS servers.
DNS is based on the named daemon, which is built on the BIND (Berkeley Internet Name Domain)
package developed through the Internet Software Consortium Users wants to access by name so DNS
will interpret the name into ip address. You need to specify the Address if DNS server in each and every
client machine. In Redhat Enterprise Linux, you need to specify the DNS server into /etc/resolv.conf file.
After Specifying the DNS server address, you can verify using host, dig and nslookup commands.
RedHat認定試験 RH-302問題集 RH-302 RH-302問題集 RH-302
NO.11 mkdir /mnt/neo
RedHat認定試験 RH-302問題集 RH-302 RH-302問題集 RH-302
NO.12 Write:
RedHat認定試験 RH-302問題集 RH-302 RH-302問題集 RH-302
NO.13 It will ask for the Starting Cylinder: Use the Default by pressing Enter Key.
RedHat認定試験 RH-302問題集 RH-302 RH-302問題集 RH-302
NO.14 vi /etc/fstab
RedHat認定試験 RH-302問題集 RH-302 RH-302問題集 RH-302
NO.15 Or
RedHat認定試験 RH-302問題集 RH-302 RH-302問題集 RH-302
NO.16 Press P to verify the partitions lists and remember the partitions name.
RedHat認定試験 RH-302問題集 RH-302 RH-302問題集 RH-302
NO.17 Press w to write on partitions table.
RedHat認定試験 RH-302問題集 RH-302 RH-302問題集 RH-302
NO.18 You are giving RHCT Exam and in your Exam paper there is a written, make successfully ping to
192.168.0.254.
Answer and Explanation:
In Network problem thinks to check:
1. IP Configuration: use ifconfig command either IP is assigned to interface or not?
2. Default Gateway is set or not?
3. Hostname is set or not?
4. Routing problem is there?
5. Device Driver Module is loaded or not?
6. Device is activated or not?
Check In this way:
1. use ifconfig command and identify which IP is assigned or not.
2. cat /etc/sysconfig/network What, What is written here. Actually here are these parameters.
NETWORKING=yes or no
GATEWAY=x.x.x.x
HOSTNAME=?
NISDOMAIN=?
- Correct the file
3. Use vi /etc/sysconfig/network-scirpts/ifcfg-eth0 and check the proper options
DEVICE=eth0
ONBOOT=yes
BOOTPROTO=static
IPADDR=x.x.x.x
NETMAKS=x.x.x.x
GATEWAY=x.x.x.x
4. Use service network restart or start command
RedHat認定試験 RH-302問題集 RH-302 RH-302問題集 RH-302
NO.19 Create the partition having 100MB size and mount it on /mnt/neo
Answer and Explanation:
1. Use fdisk /dev/hda-> To create new partition.
2. Type n-> For New partitions
3. It will ask for Logical or Primary Partitions. Press l for logical.
RedHat認定試験 RH-302問題集 RH-302 RH-302問題集 RH-302
NO.20 mount /dev/hda? /mnt/neo
4. Your System is going use as a router for 172.24.0.0/16 and 172.25.0.0/16. Enable the
IP Forwarding.
Answer and Explanation:
1. echo "1" >/proc/sys/net/ipv4/ip_forward
2. vi /etc/sysctl.conf
net.ipv4.ip_forward=1
/proc is the virtual filesystem, containing the information about the running kernel. To change the
parameter of running kernel you should modify on /proc. From Next reboot the system, kernel will take the
value from /etc/sysctl.conf.
5. Some users home directory is shared from your system. Using showmount -e localhost command, the
shared directory is not shown. Make access the shared users home directory.
Answer and Explanation:
1. Verify the File whether Shared or not ? : cat /etc/exports
2. Start the nfs service: service nfs start
3. Start the portmap service: service portmap start
4. Make automatically start the nfs service on next reboot: chkconfig nfs on
5. Make automatically start the portmap service on next reboot: chkconfig portmap on
6. Verify either sharing or not: showmount -e localhost
7. Check that default firewall is running on system ? if running flush the iptables using iptables -F and stop
the iptables service.
6. neo user tried by:
dd if=/dev/zero of=/home/neo/somefile bs=1024 count=70
files created successfully. Again neo tried to create file having 70K using following command:
dd if=/dev/zero of=/home/neo/somefile bs=1024 count=70
But he is unable to create the file. Make the user can create the file less then 70K.
Answer and Explanation:
Very Tricky from redhat. Actually is giving scenario to you to implement quota to neo user. You should
apply the quota to neo user on /home that neo user shouldn't occupied space more than 70K.
1. vi /etc/fstab
LABEL=/home /home ext3 defaults,usrquota 0 0
To enable the quota on filesystem you should mount the filesystem with usrquota for user quota and
grpquota for group quota.
2. touch /home/aquota.user ->Creating blank quota database file.
3. mount -o remount /home-> Remounting the /home with updated mount options.
You can verify that /home is mounted with usrquota options or not using mount command.
4. quotacheck -u /home ->Initialization the quota on /home
5. edquota -u neo /home-> Quota Policy editor
See the snapshot
Disk quotas for user neo (uid 500):
Filesystem blocks soft hard inodes soft hard
/dev/mapper/vo-myvol 2 30 70 1 0 0
Can you set the hard limit 70 and soft limit as you think like 30.
Verify using the repquota /home command.
7. One Logical Volume is created named as myvol under vo volume group and is mounted. The Initial
Size of that Logical Volume is 124MB. Make successfully that the size of Logical Volume 245MB without
losing any data. The size of logical volume 240MB to 255MB will be acceptable.
Answer and Explanation:
1. First check the size of Logical Volume: lvdisplay /dev/vo/myvol
2. Increase the Size of Logical Volume: lvextend -L+121M /dev/vo/myvol
3. Make Available the size on online: resize2fs /dev/vo/myvol
4. Verify the Size of Logical Volume: lvdisplay /dev/vo/myvol
5. Verify that the size comes in online or not: df -h
We can extend the size of logical Volume using the lvextend command. As well as to decrease the size of
Logical Volume, use the lvresize command. In LVM v2 we can extend the size of Logical Volume without
unmount as well as we can bring the actual size of Logical Volume on online using ext2online command.
8. Quota is implemented on /data but not working properly. Find out the Problem and implement the quota
to user1 to have a soft limit 60 inodes (files) and hard limit of 70 inodes (files).
Answer and Explanation:
Quotas are used to limit a user's or a group of users' ability to consume disk space. This prevents a small
group of users from monopolizing disk capacity and potentially interfering with other users or the entire
system. Disk quotas are commonly used by ISPs, by Web hosting companies, on FTP sites, and on
corporate file servers to ensure continued availability of their systems.
Without quotas, one or more users can upload files on an FTP server to the point of filling a filesystem.
Once the affected partition is full, other users are effectively denied upload access to the disk. This is also
a reason to mount different filesystem directories on different partitions. For example, if you only had
partitions for your root (/) directory and swap space, someone uploading to your computer could fill up all
of the space in your root directory (/). Without at least a little free space in the root directory (/), your
system could become unstable or even crash.
You have two ways to set quotas for users. You can limit users by inodes or by kilobytesized disk blocks.
Every Linux file requires an inode. Therefore, you can limit users by the number of files or by absolute
space. You can set up different quotas for different filesystems. For example, you can set different quotas
for users on the /home and /tmp directories if they are mounted on their own partitions.
Limits on disk blocks restrict the amount of disk space available to a user on your system.
Older versions of Red Hat Linux included LinuxConf, which included a graphical tool to configure quotas.
As of this writing, Red Hat no longer has a graphical quota configuration tool. Today, you can configure
quotas on RHEL only through the command line interface.
1. vi /etc/fstab /dev/hda11 /data ext3 defaults,usrquota 1 2
2. Either Reboot the System or remount the partition.
Mount -o remount /dev/hda11 /data
3. touch /data/aquota.user
4. quotacheck -ufm /data
5. quotaon -u /data
6. edquota -u user1 /data and Specified the Soft limit and hard limit on opened file.
To verify either quota is working or not:
Soft limit specify the limit to generate warnings to users and hard limit can't cross by the user. Use the
quota command or repquota command to monitor the quota information.
9. One Logical Volume named lv1 is created under vg0. The Initial Size of that Logical Volume is 100MB.
Now you required the size 500MB. Make successfully the size of that Logical Volume 500M without losing
any data. As well as size should be increased online.
Answer and Explanation:
The LVM system organizes hard disks into Logical Volume (LV) groups. Essentially,physical hard disk
partitions (or possibly RAID arrays) are set up in a bunch of equalRH302 sized chunks known as Physical
Extents (PE). As there are several other concepts associated with the LVM system, let's start with some
basic definitions:
. Physical Volume (PV) is the standard partition that you add to the LVM mix.
Normally, a physical volume is a standard primary or logical partition. It can also be a RAID array.
. Physical Extent (PE) is a chunk of disk space. Every PV is divided into a number of equal sized PEs.
Every PE in a LV group is the same size. Different LV groups can have different sized PEs.
. Logical Extent (LE) is also a chunk of disk space. Every LE is mapped to a specific PE.
. Logical Volume (LV) is composed of a group of LEs. You can mount a filesystem such as /home and /var
on an LV.
. Volume Group (VG) is composed of a group of LVs. It is the organizational group for LVM. Most of the
commands that you'll use apply to a specific VG.
1. Verify the size of Logical Volume: lvdisplay /dev/vg0/lv1
2. Verify the Size on mounted directory: df -h or df -h mounted directory name
3. Use : lvextend -L+400M /dev/vg0/lv1
4. resize2fs /dev/vg0/lv1 to bring extended size online.
5. Again Verify using lvdisplay and df -h command.
10. Create one partitions having size 100MB and mount it on /data.
Answer and Explanation:
1. Use fdisk /dev/hda ->To create new partition.
2. Type n-> For New partitions
3. It will ask for Logical or Primary Partitions. Press l for logical.
4. It will ask for the Starting Cylinder: Use the Default by pressing Enter Key.
5. Type the Size: +100M ->You can Specify either Last cylinder of Size here.
6. Press P to verify the partitions lists and remember the partitions name.
7. Press w to write on partitions table.
8. Either Reboot or use partprobe command.
9. Use mkfs -t ext3 /dev/hda?
Or
mke2fs -j /dev/hda? To create ext3 filesystem.
10. vi /etc/fstab
Write:
/dev/hda? /data ext3 defaults 1 2
11. Verify by mounting on current Sessions also:
mount /dev/hda? /data
11. You are new System Administrator and from now you are going to handle the system and your main
task is Network monitoring, Backup and Restore. But you don't know the root password. Change the root
password to redhat and login in default Runlevel.
Answer and Explanation:
When you Boot the System, it starts on default Runlevel specified in /etc/inittab:
Id:?:initdefault:
When System Successfully boot, it will ask for username and password. But you don't know the root's
password. To change the root password you need to boot the system into single user mode. You can pass
the kernel arguments from the boot loader.
1. Restart the System.
2. You will get the boot loader GRUB screen.
3. Press a and type 1 or s for single mode
ro root=LABEL=/ rhgb queit s
4. System will boot on Single User mode.
5. Use passwd command to change.
6. Press ctrl+d
12. There are more then 400 Computers in your Office. You are appointed as a System Administrator. But
you don't have Router. So, you are going to use your One Linux Server as a Router. How will you enable
IP packets forward?
Answer and Explanation:
1. /proc is the virtual filesystem, we use /proc to modify the kernel parameters at running time.
# echo "1" >/proc/sys/net/ipv4/ip_forward
2. /etc/sysctl.conf when System Reboot on next time, /etc/rc.d/rc.sysinit scripts reads the file
/etc/sysctl.conf.-> To enable the IP forwarding on next reboot also you need to set the parameter.
net.ipv4.ip_forward=1
Here 0 means disable, 1 means enable.
13. You Completely Install the Redhat Enterprise Linux 5 on your System. While start the system, it's
giving error to load X window System. How will you fix that problem and make boot successfully run X
Window System.
Answer and Explanation:
Think while Problems occurred on booting System on Runlevel 5 (X Window)
1. /tmp is full or not
2. Quota is already reached
3. Video card or resolution or monitor is misconfigured.
4. xfs service is running or not.
Do These:
1. df -h /tmp /tmp is full remove the unnecessary file
2. quota username if quota is already reached remove unnecessary file from home directory.
3. Boot the System in runlevel 3. you can pass the Kernel Argument from boot loader.
4. Use command: system-config-display It will display a dialog to configure the monitor, Video card,
resolution etc.
5. Set the Default Runlevel 5 in /etc/inittab
id:5:initdefault:
6. Reboot the System you will get the GUI login Screen.
14. There are two different networks, 192.168.0.0/24 and 192.168.1.0/24. Your System is in
192.168.0.0/24 Network. One RHEL 5 Installed System is going to use as a Router. All required
configuration is already done on Linux Server. Where 192.168.0.254 and 192.168.1.254 IP Address
are assigned on that Server. How will make successfully ping to 192.168.1.0/24 Network's Host?
Answer and Explanation:
1. vi /etc/sysconfig/network
GATEWAY=192.168.0.254
OR
vi /etc/sysconf/network-scripts/ifcfg-eth0
DEVICE=eth0
BOOTPROTO=static
ONBOOT=yes
IPADDR=192.168.0.?
NETMASK=255.255.255.0
GATEWAY=192.168.0.254
2. service network restart
Explanation: Gateway defines the way to exit the packets. According to System working as a router for
two networks have IP Address 192.168.0.254 and 192.168.1.254.
To get the hosts on 192.168.1.0/24 should go through 192.168.0.254.
15. Make a swap partition having 100MB. Make Automatically Usable at System Boot Time.
Answer and Explanation:
1. Use fdisk /dev/hda ->To create new partition.
2. Type n-> For New partition
3. It will ask for Logical or Primary Partitions. Press l for logical.
4. It will ask for the Starting Cylinder: Use the Default by pressing Enter Key.
5. Type the Size: +100M ->You can Specify either Last cylinder of Size here.
6. Press P to verify the partitions lists and remember the partitions name. Default System ID is 83 that
means Linux Native.
7. Type t to change the System ID of partition.
8. Type Partition Number
9. Type 82 that means Linux Swap.
10. Press w to write on partitions table.
11. Either Reboot or use partprobe command.
12. mkswap /dev/hda? ->To create Swap File system on partition.
13. swapon /dev/hda? ->To enable the Swap space from partition.
14. free -m ->Verify Either Swap is enabled or not.
15. vi /etc/fstab
/dev/hda? swap swap defaults 0 0
16. Reboot the System and verify that swap is automatically enabled or not.
16. You are a System administrator. Using Log files very easy to monitor the system.
Now there are 50 servers running as Mail, Web, Proxy, DNS services etc. You want to centralize the logs
from all servers into on LOG Server. How will you configure the LOG Server to accept logs from remote
host ?
Answer and Explanation:
By Default system accept the logs only generated from local host. To accept the Log from other host
configure:
1. vi /etc/sysconfig/syslog
SYSLOGD_OPTIONS="-m 0 -r"
Where
-m 0 disables 'MARK' messages.
-r enables logging from remote machines
-x disables DNS lookups on messages recieved with -r
2. service syslog restart
17. You are giving the debug RHCT exam. The examiner told you that the password of root is redhat.
When you tried to login displays the error message and redisplayed the login screen. You changed the
root password, again unable to login as a root.
How will you make Successfully Login as a root.
Answer and Explanation:
When root unable to login into the system think:
1. Is password correct?
2. Is account expired?
3. Is terminal Blocked?
Do these Steps:
. Boot the System on Single user mode.
. Change the password
. Check the account expire date by using chage -l root command.
If account is expired, set net expire date: chage -E "NEVER" root
1. Check the file /etc/securetty Which file blocked to root login from certain terminal.
2. If terminal is deleted or commented write new or uncomment.
3. Reboot the system and login as a root.
RedHat認定試験 RH-302問題集 RH-302 RH-302問題集 RH-302
JapanCertは最新の3I0-012問題集と高品質の78-702問題と回答を提供します。JapanCertの70-246 VCEテストエンジンと1z0-593試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質のHP2-Z25 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。
没有评论:
发表评论