JapanCertのMicrosoftの070-536-Csharp 070-545-Csharp 070-542-Csharp試験トレーニング資料の知名度が非常に高いことを皆はよく知っています。JapanCert は世界的によく知られているサイトです。どうしてこのような大きな連鎖反応になりましたか。それはJapanCertのMicrosoftの070-536-Csharp 070-545-Csharp 070-542-Csharp試験トレーニング資料は適用性が高いもので、本当にみなさんが良い成績を取ることを助けられるからです。
Microsoftの070-536-Csharp 070-545-Csharp 070-542-Csharp認定試験に受かりたいのなら、適切なトレーニングツールを選択する必要があります。Microsoftの070-536-Csharp 070-545-Csharp 070-542-Csharp認定試験に関する研究資料が重要な一部です。我々JapanCertはMicrosoftの070-536-Csharp 070-545-Csharp 070-542-Csharp認定試験に対する効果的な資料を提供できます。JapanCertのIT専門家は全員が実力と豊富な経験を持っているのですから、彼らが研究した材料は実際の試験問題と殆ど同じです。JapanCertは特別に受験生に便宜を提供するためのサイトで、受験生が首尾よく試験に合格することを助けられます。
Microsoft 070-536-Csharp 070-545-Csharp 070-542-Csharp認証試験に合格することが簡単ではなくて、Microsoft 070-536-Csharp 070-545-Csharp 070-542-Csharp証明書は君にとってはIT業界に入るの一つの手づるになるかもしれません。しかし必ずしも大量の時間とエネルギーで復習しなくて、弊社が丹精にできあがった問題集を使って、試験なんて問題ではありません。
JapanCertが提供する資料は比べものにならない資料です。これは前例のない真実かつ正確なものです。受験生のあなたが首尾よく試験に合格することを助けるように、当社のITエリートの団体はずっと探っています。JapanCertが提供した製品は真実なもので、しかも価格は非常に合理的です。JapanCertの製品を選んだら、あなたがもっと充分の時間で試験に準備できるように、当社は一年間の無料更新サービスを提供します。そうしたら、試験からの緊張感を解消することができ、あなたは最大のメリットを取得できます。
JapanCertは多種なIT認証試験を受ける方を正確な資料を提供者でございます。弊社の無料なサンプルを遠慮なくダウンロードしてください。
試験番号：070-536-Csharp問題集
試験科目：Microsoft 「TS:MS.NET Framework 2.0-Application Develop Foundation」
問題と解答：全160問
試験番号：070-545-Csharp問題集
試験科目：Microsoft 「TS:Microsoft Visio 2007, Application Development」
問題と解答：全54問
試験番号：070-542-Csharp問題集
試験科目：Microsoft 「MS Office SharePoint Server 2007-Application Development」
問題と解答：全162問
JapanCertというサイトは世界的に知名度が高いです。それはJapanCertが提供したIT業種のトレーニング資料の適用性が強いですから。それはJapanCertのIT専門家が長い時間で研究した成果です。彼らは自分の知識と経験を活かして、絶え間なく発展しているIT業種の状況によってJapanCertのMicrosoftの070-536-Csharp 070-545-Csharp 070-542-Csharpトレーニング資料を作成したのです。多くの受験生が利用してからとても良い結果を反映しました。もしあなたはIT認証試験に準備している一人でしたら、JapanCertのMicrosoftの070-536-Csharp 070-545-Csharp 070-542-Csharpトレーニング資料を選らんだほうがいいです。利用しないのならメリットが分からないですから、速く使ってみてください。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.japancert.com/070-536-Csharp.html
NO.1 You create a class that is derived from the Installer class. The class you create is used to perform a
component installation.
The component installation overwrites the value of a registry key. You create a method named
GetRegValue that returns the current value of the registry key.
You need to add a code segment that preserves the original value of the registry key if the component is
uninstalled.
Which code segment should you use?
A. private void BeforeUninstallEventHandler(
object sender, InstallEventArgs e) {
e.SavedState.Add("original RegValue", GetRegValue());
}
B. private void CommittedEventHandler(
object sender, InstallEventArgs e) {
e.SavedState.Add("original RegValue", GetRegValue());
}
C. public override void Uninstall(
IDictionary savedState) {
base.Uninstall(savedState);
savedState.Add("original RegValue", GetRegValue());
}
D. protected override void OnBeforeInstall(
IDictionary savedState) {
base.OnBeforeInstall(savedState);
savedState.Add("original RegValue", GetRegValue());
}
Answer: D
Microsoft認定試験 070-536-Csharp認定試験 070-536-Csharp練習問題 070-536-Csharp認定試験
NO.2 You create a class library that is used by applications in three departments of your company. The
library contains a Department class with the following definition.
public class Department {
public string name;
public string manager;
}
Each application uses a custom configuration section to store department-specific values in the
application configuration file as shown in the following code.
<Department>
<name>Hardware</name>
<manager>Amy</manager>
</Department>
You need to write a code segment that creates a Department object instance by using the field values
retrieved from the application configuration file.
Which code segment should you use?
A. public class deptElement : ConfigurationElement {
protected override void DeserializeElement(
XmlReader reader, bool serializeCollectionKey) {
Department dept = new Department();
dept.name = ConfigurationManager.AppSettings["name"];
dept.manager =
ConfigurationManager.AppSettings["manager"];
return dept;
}
}
B. public class deptElement: ConfigurationElement {
protected override void DeserializeElement(
XmlReader reader, bool serializeCollectionKey) {
Department dept = new Department();
dept.name = reader.GetAttribute("name");
dept.manager = reader.GetAttribute("manager");
}
}
C. public class deptHandler : IConfigurationSectionHandler {
public object Create(object parent, object configContext,
System.Xml.XmlNode section) {
Department dept = new Department();
dept.name = section.SelectSingleNode("name").InnerText;
dept.manager =
section.SelectSingleNode("manager").InnerText;
return dept;
}
}
D. public class deptHandler : IConfigurationSectionHandler {
public object Create(object parent, object configContext,
System.Xml.XmlNode section) {
Department dept = new Department();
dept.name = section.Attributes["name"].Value;
dept.manager = section.Attributes["manager"].Value;
return dept;
}
}
Answer: C
Microsoft認定試験 070-536-Csharp認定証 070-536-Csharp
NO.3 You are developing an application that stores data about your company's sales and technical support
teams.
You need to ensure that the name and contact information for each person is available as a single
collection when a user queries details about a specific team. You also need to ensure that the data
collection guarantees type safety.
Which code segment should you use?
A. Hashtable team = new Hashtable();
team.Add(1, "Hance");
team.Add(2, "Jim");
team.Add(3, "Hanif");
team.Add(4, "Kerim");
team.Add(5, "Alex");
team.Add(6, "Mark");
team.Add(7, "Roger");
team.Add(8, "Tommy");
B. ArrayList team = new ArrayList();
team.Add("1, Hance");
team.Add("2, Jim");
team.Add("3, Hanif");
team.Add("4, Kerim");
team.Add("5, Alex");
team.Add("6, Mark");
team.Add("7, Roger");
team.Add("8, Tommy");
C. Dictionary<int, string> team =
new Dictionary<int, string>();
team.Add(1, "Hance");
team.Add(2, "Jim");
team.Add(3, "Hanif");
team.Add(4, "Kerim");
team.Add(5, "Alex");
team.Add(6, "Mark");
team.Add(7, "Roger");
team.Add(8, "Tommy");
D. string[] team =
new string[] {"1, Hance",
"2, Jim", "3, Hanif",
"4, Kerim", "5, Alex",
"6, Mark", "7, Roger",
"8, Tommy"};
Answer: C
Microsoft 070-536-Csharp練習問題 070-536-Csharp 070-536-Csharp問題集 070-536-Csharp 070-536-Csharp練習問題
NO.4 You are creating a class named Temperature. The Temperature class contains a public field named F.
The public field F represents a temperature in degrees Fahrenheit.
You need to ensure that users can specify whether a string representation of a Temperature instance
displays the Fahrenheit value or the equivalent Celsius value.
Which code segment should you use?
A. public class Temperature : IFormattable {
public int F;
public string ToString(string format, IFormatProvider fp) {
if ((format == "F")|| (format == null)) return F.ToString();
if (format == "C") return ((F - 32) / 1.8).ToString();
throw new FormatException("Invalid format string");
}
}
B. public class Temperature : ICustomFormatter {
public int F;
public string Format(string format, object arg,
IFormatProvider fp) {
if (format == "C") return ((F - 32) / 1.8).ToString();
if (format == "F") return arg.ToString();
throw new FormatException("Invalid format string");
}
}
C. public class Temperature {
public int F;
public string ToString(string format, IFormatProvider fp) {
if (format == "C") {
return ((F - 32) / 1.8).ToString();
} else {
return this.ToString();
}
}
}
D. public class Temperature {
public int F;
protected string format;
public override String ToString() {
if (format == "C")
return ((F - 32) / 1.8).ToString();
return F.ToString();
}
}
Answer: A
Microsoft 070-536-Csharp 070-536-Csharp 070-536-Csharp認定資格 070-536-Csharp問題集
NO.5 You are instantiating a variable to store only strings. The variable is named messageStore.
You need to ensure that string messages are read and processed in the order in which they are received.
Which code segment should you use?
A. Stack<string> messageStore = new Stack<string>();
messageStore.Push("This is a test message...");
B. Stack messageStore = new Stack();
messageStore.Push("This is a test message...");
C. Queue messageStore = new Queue();
messageStore.Enqueue("This is a test message...");
D. Queue<string> messageStore = new Queue<string>();
messageStore.Enqueue("This is a test message...");
Answer: D
Microsoft 070-536-Csharp 070-536-Csharp参考書
NO.6 You need to write a multicast delegate that accepts a DateTime argument.
Which code segment should you use?
A. public delegate int PowerDeviceOn(bool result,
DateTime autoPowerOff);
B. public delegate bool PowerDeviceOn(object sender,
EventArgs autoPowerOff);
C. public delegate void PowerDeviceOn(DateTime autoPowerOff);
D. public delegate bool PowerDeviceOn(DateTime autoPowerOff);
Answer: C
Microsoft 070-536-Csharp練習問題 070-536-Csharp 070-536-Csharp
NO.7 You write the following code.
public delegate void FaxDocs(object sender, FaxArgs args);
You need to create an event that will invoke FaxDocs.
Which code segment should you use?
A. public static event FaxDocs Fax;
B. public static event Fax FaxDocs;
C. public class FaxArgs : EventArgs {
private string coverPageInfo;
public FaxArgs(string coverInfo) {
this.coverPageInfo = coverPageInfo;
}
public string CoverPageInformation {
get {return this.coverPageInfo;}
}
}
D. public class FaxArgs : EventArgs {
private string coverPageInfo;
public string CoverPageInformation {
get {return this.coverPageInfo;}
}
}
Answer: A
Microsoft問題集 070-536-Csharp 070-536-Csharp 070-536-Csharp
NO.8 You are developing a routine that will periodically perform a calculation based on regularly changing
values from legacy systems. You write the following lines of code. (Line numbers are included for
reference only.)
01 bool exitLoop = false;
02 do {
03
04 exitLoop = PerformCalculation();
05 } while (!exitLoop);
You need to write a code segment to ensure that the calculation is performed at 30-second intervals. You
must ensure that minimum processor resources are used between the calculations.
Which code segment should you insert at line 03?
A. Thread.Sleep(30000);
B. Thread.SpinWait(30000);
C. Thread thrdCurrent = Thread.CurrentThread;
thrdCurrent.Priority = ThreadPriority.BelowNormal;
D. Thread thrdCurrent = Thread.CurrentThread;
thrdCurrent.Priority = ThreadPriority.Lowest;
E. Thread.SpinWait(30);
Answer: A
Microsoft認定資格 070-536-Csharp 070-536-Csharp問題集
NO.9 You develop a service application named FileService. You deploy the service application to multiple
servers on your network.
You implement the following code segment. (Line numbers are included for reference only.)
01 public void StartService(string serverName){
02 ServiceController crtl = new
03 ServiceController("FileService");
04 if (crtl.Status == ServiceControllerStatus.Stopped){
05 }
06 }
You need to develop a routine that will start FileService if it stops. The routine must start FileService on
the server identified by the serverName input parameter.
Which two lines of code should you add to the code segment? (Each correct answer presents part of the
solution. Choose two.)
A. Insert the following line of code between lines 03 and 04:
crtl.ServiceName = serverName;
B. Insert the following line of code between lines 03 and 04:
crtl.MachineName = serverName;
C. Insert the following line of code between lines 03 and 04:
crtl.Site.Name = serverName;
D. Insert the following line of code between lines 04 and 05:
crtl.Continue();
E. Insert the following line of code between lines 04 and 05:
crtl.Start();
F. Insert the following line of code between lines 04 and 05:
crtl.ExecuteCommand(0);
Answer: BE
Microsoft 070-536-Csharp参考書 070-536-Csharp認証試験 070-536-Csharp認定資格 070-536-Csharp認定資格 070-536-Csharp問題集
NO.10 You are developing an application to perform mathematical calculations. You develop a class named
CalculationValues. You write a procedure named PerformCalculation that operates on an instance of the
class.
You need to ensure that the user interface of the application continues to respond while calculations are
being performed. You need to write a code segment that calls the PerformCalculation procedure to
achieve this goal.
Which code segment should you use?
A. private void PerformCalculation() {
...
}
private void DoWork(){
CalculationValues myValues = new CalculationValues();
Thread newThread = new Thread(
new ThreadStart(PerformCalculation));
newThread.Start(myValues);
}
B. private void PerformCalculation() {
...
}
private void DoWork(){
CalculationValues myValues = new CalculationValues();
ThreadStart delStart = new
ThreadStart(PerformCalculation);
Thread newThread = new Thread(delStart);
if (newThread.IsAlive) {
newThread.Start(myValues);
}
}
C. private void PerformCalculation (CalculationValues values) {
...
}
private void DoWork(){
CalculationValues myValues = new CalculationValues();
Application.DoEvents();
PerformCalculation(myValues);
Application.DoEvents();
}
D. private void PerformCalculation(object values) {
...
}
private void DoWork(){
CalculationValues myValues = new CalculationValues();
Thread newThread = new Thread(
new ParameterizedThreadStart(PerformCalculation));
newThread.Start(myValues);
}
Answer: D
Microsoft認定資格 070-536-Csharp認定証 070-536-Csharp問題集 070-536-Csharp参考書 070-536-Csharp
NO.11 You are writing a custom dictionary. The custom-dictionary class is named MyDictionary.
You need to ensure that the dictionary is type safe.
Which code segment should you use?
A. class MyDictionary : Dictionary<string, string>
B. class MyDictionary : HashTable
C. class MyDictionary : IDictionary
D. class MyDictionary { ... }
Dictionary<string, string> t =
new Dictionary<string, string>();
MyDictionary dictionary = (MyDictionary)t;
Answer: A
Microsoft 070-536-Csharp認定証 070-536-Csharp 070-536-Csharp 070-536-Csharp
NO.12 You need to write a code segment that will add a string named strConn to the connection string section
of the application configuration file.
Which code segment should you use?
A. Configuration myConfig =
ConfigurationManager.OpenExeConfiguration(
ConfigurationUserLevel.None);
myConfig.ConnectionStrings.ConnectionStrings.Add(
new ConnectionStringSettings("ConnStr1", strConn));
myConfig.Save();
B. Configuration myConfig =
ConfigurationManager.OpenExeConfiguration(
ConfigurationUserLevel.None);
myConfig.ConnectionStrings.ConnectionStrings.Add(
new ConnectionStringSettings("ConnStr1", strConn));
ConfigurationManager.RefreshSection(
"ConnectionStrings");
C. ConfigurationManager.ConnectionStrings.Add(
new ConnectionStringSettings("ConnStr1", strConn));
ConfigurationManager.RefreshSection(
"ConnectionStrings");
D. ConfigurationManager.ConnectionStrings.Add(
new ConnectionStringSettings("ConnStr1", strConn));
Configuration myConfig =
ConfigurationManager.OpenExeConfiguration(
ConfigurationUserLevel.None);
myConfig.Save();
Answer: A
Microsoft 070-536-Csharp 070-536-Csharp 070-536-Csharp 070-536-Csharp
NO.13 You are working on a debug build of an application.
You need to find the line of code that caused an exception to be thrown.
Which property of the Exception class should you use to achieve this goal?
A. Data
B. Message
C. StackTrace
D. Source
Answer: C
Microsoft 070-536-Csharp認証試験 070-536-Csharp 070-536-Csharp認定資格
NO.14 You are developing an application to assist the user in conducting electronic surveys. The survey
consists of 25 true-or-false questions.
You need to perform the following tasks:
è Initialize each answer to true.
è Minimize the amount of memory used by each survey.
Which storage option should you choose?
A. BitVector32 answers = new BitVector32(1);
B. BitVector32 answers = new BitVector32(-1);
C. BitArray answers = new BitArray (1);
D. BitArray answers = new BitArray(-1);
Answer: B
Microsoft 070-536-Csharp参考書 070-536-Csharp認定資格 070-536-Csharp 070-536-Csharp
NO.15 You need to write a code segment that will assign the name of the configuration file that the current
application domain uses to a string variable named configFile.
Which two code segments should you use to achieve the goal? (Each correct answer presents a
complete solution. Choose two.)
A. AppDomain domain = AppDomain.CurrentDomain;
configFile =
domain.GetData("APP_CONFIG_FILE").ToString();
B. AppDomain domain = AppDomain.CurrentDomain;
AppDomainSetup setup = domain.SetupInformation;
configFile = setup.ConfigurationFile;
C. AppDomain domain = AppDomain.CurrentDomain;
AppDomainSetup setup = new AppDomainSetup();
configFile = setup.ConfigurationFile;
D. AppDomainSetup setup = new AppDomainSetup();
AppDomain domain = AppDomain.CreateDomain("current",
null, setup);
configFile = setup.ConfigurationFile;
Answer: AB
Microsoft 070-536-Csharp認定試験 070-536-Csharp練習問題 070-536-Csharp練習問題 070-536-Csharp認定試験
NO.16 You are creating an application that retrieves values from a custom section of the application
configuration file. The custom section uses XML as shown in the following block.
<ProjectSection name="Project1">
<role name="administrator" />
<role name="manager" />
<role name="support" />
</ProjectSection>
You need to write a code segment to define a class named Role. You need to ensure that the Role class is
initialized with values that are retrieved from the custom section of the configuration file.
Which code segment should you use?
A. public class Role : ConfigurationElement {
internal string _ElementName = "name";
[ConfigurationProperty("role")]
public string Name {
get {
return ((string)base["role"]);
}
}
}
B. public class Role : ConfigurationElement {
internal string _ElementName = "role";
[ConfigurationProperty("name", RequiredValue = true)]
public string Name {
get {
return ((string)base["name"]);
}
}
}
C. public class Role : ConfigurationElement {
internal string _ElementName = "role";
private string _name;
[ConfigurationProperty("name")]
public string Name {
get {
return _name;
}
}
}
D. public class Role : ConfigurationElement {
internal string _ElementName = "name";
private string _name;
[ConfigurationProperty("role", RequiredValue = true)]
public string Name {
get {
return _name;
}
}
}
Answer: B
Microsoft過去問 070-536-Csharp参考書 070-536-Csharp 070-536-Csharp認証試験 070-536-Csharp認定資格 070-536-Csharp練習問題
NO.17 You are writing a method that returns an ArrayList named al.
You need to ensure that changes to the ArrayList are performed in a thread-safe manner.
Which code segment should you use?
A. ArrayList al = new ArrayList();
lock (al.SyncRoot)
{
return al;
}
B. ArrayList al = new ArrayList();
lock (al.SyncRoot.GetType())
{
return al;
}
C. ArrayList al = new ArrayList();
Monitor.Enter(al);
Monitor.Exit(al);
return al;
D. ArrayList al = new ArrayList();
ArrayList sync_al = ArrayList.Synchronized(al);
return sync_al;
Answer: D
Microsoft 070-536-Csharp 070-536-Csharp
NO.18 You are developing an application that dynamically loads assemblies from an application directory.
You need to write a code segment that loads an assembly named Assembly1.dll into the current
application domain.
Which code segment should you use?
A. AppDomain domain = AppDomain.CurrentDomain;
string myPath = Path.Combine(domain.BaseDirectory,
"Assembly1.dll");
Assembly asm = Assembly.LoadFrom(myPath);
B. AppDomain domain = AppDomain.CurrentDomain;
string myPath = Path.Combine(domain.BaseDirectory,
"Assembly1.dll");
Assembly asm = Assembly.Load(myPath);
C. AppDomain domain = AppDomain.CurrentDomain;
string myPath = Path.Combine(domain.DynamicDirectory,
"Assembly1.dll");
Assembly asm = AppDomain.CurrentDomain.Load(myPath);
D. AppDomain domain = AppDomain.CurrentDomain;
Assembly asm = domain.GetData("Assembly1.dll");
Answer: A
Microsoft 070-536-Csharp 070-536-Csharp 070-536-Csharp 070-536-Csharp認証試験
NO.19 You are creating a class named Age.
You need to ensure that the Age class is written such that collections of Age objects can be sorted.
Which code segment should you use?
A. public class Age {
public int Value;
public object CompareTo(object obj) {
if (obj is Age) {
Age _age = (Age) obj;
return Value.CompareTo(obj);
}
throw new ArgumentException("object not an Age");
}
}
B. public class Age {
public int Value;
public object CompareTo(int iValue) {
try {
return Value.CompareTo(iValue);
} catch {
throw new ArgumentException ("object not an Age");
}
}
}
C. public class Age : IComparable {
public int Value;
public int CompareTo(object obj) {
if (obj is Age) {
Age _age = (Age) obj;
return Value.CompareTo(_age.Value);
}
throw new ArgumentException("object not an Age");
}
}
D. public class Age : IComparable {
public int Value;
public int CompareTo(object obj) {
try {
return Value.CompareTo(((Age) obj).Value);
} catch {
return -1;
}
}
}
Answer: C
Microsoft 070-536-Csharp認証試験 070-536-Csharp 070-536-Csharp過去問 070-536-Csharp問題集
NO.20 You need to write a code segment that will create a common language runtime (CLR) unit of isolation
within an application.
Which code segment should you use?
A. AppDomainSetup mySetup =
AppDomain.CurrentDomain.SetupInformation;
mySetup.ShadowCopyFiles = "true";
B. System.Diagnostics.Process myProcess;
myProcess = new System.Diagnostics.Process();
C. AppDomain domain;
domain = AppDomain.CreateDomain("MyDomain");
D. System.ComponentModel.Component myComponent;
myComponent = new System.ComponentModel.Component();
Answer: C
Microsoft 070-536-Csharp認定資格 070-536-Csharp 070-536-Csharp 070-536-Csharp認定証
没有评论:
发表评论