CheckPointの156-315-71認定試験の問題集

JapanCertは受験生の皆様に最も良いかつ便利なサービスを提供できるようにずっと一生懸命頑張っています。現在の時代で高効率は避けられない話題ですから、速いスピードと高効率が我々の目標です。受験の皆さんは速く知識を理解して高い点数を取得できるようにJapanCertは効率的なトレーニング資料をデザインしてさしあげます。皆さんは節約した時間とエネルギーを利用してもっと多くの金銭を稼ぐことができます。

IT業界の中でたくさんの野心的な専門家がいって、IT業界の中でより一層頂上まで一歩更に近く立ちたくてCheckPointの156-315-71試験に参加して認可を得たくて、CheckPoint の156-315-71試験が難度の高いので合格率も比較的低いです。CheckPointの156-315-71試験を申し込むのは賢明な選択で今のは競争の激しいIT業界では、絶えず自分を高めるべきです。しかし多くの選択肢があるので君はきっと悩んでいましょう。

試験番号：156-315-71問題集
試験科目：CheckPoint 「Check Point Certified Security Expert R71」
問題と解答：全480問

JapanCertが提供した問題集を使用してIT業界の頂点の第一歩としてとても重要な地位になります。君の夢は1歩更に近くなります。資料を提供するだけでなく、CheckPointの156-315-71試験も一年の無料アップデートになっています。

156-315-71認定試験と言ったら、信頼できるのを無視することは難しい。JapanCert の156-315-71試験トレーニング資料は特別にデザインしてできるだけあなたの仕事の効率を改善するのソフトです。JapanCertは世界的にこの試験の合格率を最大限に高めることに力を尽くしています。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.japancert.com/156-315-71.html

NO.1 Organizations are sometimes faced with the need to locate cluster members in different geographic
locations that are distant from each other. A typical example is replicated data centers whose location is
widely separated for disaster recovery purposes.
What are the restrictions of this solution?
A. There are no restrictions.
B. There is one restriction: The synchronization network must guarantee no more than 150 ms latency
(ITU Standard G.114).
C. There is one restriction: The synchronization network must guarantee no more than 100 ms latency.
D. There are two restrictions: 1. The synchronization network must guarantee no more than 100ms
latency and no more than 5% packet loss. 2. The synchronization network may only include switches and
hubs.
Answer: D

CheckPoint参考書   156-315-71   156-315-71   156-315-71   156-315-71認定証

NO.2 Which external user authentication protocols are supported in SSL VPN?
A. LDAP, Active Directory, SecurID
B. DAP, SecurID, Check Point Password, OS Password, RADIUS, TACACS
C. LDAP, RADIUS, Active Directory, SecurID
D. LDAP, RADIUS, TACACS, SecurID
Answer: B

CheckPoint   156-315-71   156-315-71認定試験   156-315-71   156-315-71   156-315-71

NO.3 You want to verify that your Check Point cluster is working correctly. Which command line tool can you
use?
A. cphaconf state
B. cphaprob state
C. cphainfo-s
D. cphastart -status
Answer: B

CheckPoint   156-315-71認定試験   156-315-71認証試験   156-315-71   156-315-71過去問

NO.4 What is a task of the SmartEvent Correlation Unit?
A. Add events to the events database.
B. Look for patterns according to the installed Event Policy.
C. Assign a severity level to an event
D. Display the received events.
Answer: B

CheckPoint認定資格   156-315-71   156-315-71   156-315-71過去問

NO.5 Which of the following is NOT a feature of ClusterXL?
A. Enhanced throughput in all ClusterXL modes (2 gateway cluster compared with 1 gateway)
B. Transparent failover in case of device failures
C. Zero downtime for mission-critical environments with State Synchronization
D. Transparent upgrades
Answer: C

CheckPoint参考書   156-315-71   156-315-71過去問

NO.6 ________is a proprietary Check Point protocol. it is the basis for Check Point ClusterXL inter-module
communication.
A. RDP
B. CCP
C. CKPP
D. HA OPCODE
Answer: B

CheckPoint問題集   156-315-71練習問題   156-315-71

NO.7 Which of the following manages Standard Reports and allows the administrator to specify automatic
uploads of reports to a central FTP server?
A. Smart Dashboard Log Consolidator
B. Security Management Server
C. Smart Reporter Database
D. Smart Reporter
Answer: D

CheckPoint   156-315-71   156-315-71   156-315-71

NO.8 Refer to Exhibit:
Match the ClusterXL Modes with their configurations
A. A-3, B-2, C-1, D-4
B. A-3, B-2, C-4, D-1
C. A-2, B-3, C-4, D-1
D. A-2, B-3, C-1, D-4
Answer: C

CheckPoint認証試験   156-315-71認定証   156-315-71   156-315-71

NO.9 When you check Web Server in a host-node object, what happens to the host?
A. The Web server daemon is enabled on the host.
B. More granular controls are added to the host, in addition to Web Intelligence tab settings.
C. You can specify allowed ports in the Web server's node-object properties. You then do not need to list
all allowed ports in the Rule Base.
D. IPS Web Intelligence is enabled to check on the host.
Answer: B

CheckPoint練習問題   156-315-71   156-315-71過去問   156-315-71過去問   156-315-71問題集

NO.10 Which of the following statements about the Port Scanning feature of IPS is TRUE?
A. The default scan detection is when more than 500 open inactive ports are open for a period of 120
seconds.
B. The Port Scanning feature actively blocks the scanning, and sends an alert to SmartView Monitor.
C. Port Scanning does not block scanning; it detects port scans with one of three levels of detection
sensitivity.
D. When a port scan is detected, only a log is issued, never an alert.
Answer: C

CheckPoint   156-315-71   156-315-71

NO.11 You are establishing a ClusterXL environment, with the following topology: External interfaces
192.168.10.1 and 192.168.10.2 connect to a VLAN switch. The upstream router connects to the same
VLAN switch. Internal interfaces 172.16 10.1 and 172.16.10.2 connect to a hub. 10.10.10.0 is the
synchronization network. The Security Management Server is located on the internal network with IP
172.16.10.3. What is the problem with this configuration?
A. There is an IP address conflict
B. The Security Management Server must be in the dedicated synchronization network, not the internal
network.
C. The Cluster interface names must be identical across all cluster members.
D. Cluster members cannot use the VLAN switch. They must use hubs.
Answer: B

CheckPoint練習問題   156-315-71認証試験   156-315-71練習問題   156-315-71認証試験   156-315-71   156-315-71問題集

NO.12 Which procedure creates a new administrator in SmartWorkflow?
A. Run cpconfig, supply the Login Name. Profile Properties, Name, Access Applications and Permissions.
B. In SmartDashboard, click SmartWorkflow / Enable SmartWorkflow and the Enable SmartWorkflow
wizard will start. Supply the Login Name, Profile Properties, Name, Access Applications and Permissions
when prompted.
C. On the Provider-1 primary MDS, run cpconfig, supply the Login Name, Profile Properties, Name,
Access Applications and Permissions.
D. In SmartDashboard, click Users and Administrators right click Administrators / New Administrator and
supply the Login Name. Profile Properties, Name, Access Applications and Permissions.
Answer: D

CheckPoint   156-315-71認定証   156-315-71   156-315-71   156-315-71

NO.13 Check point Clustering protocol, works on:
A. UDP 8116
B. UDP 500
C. TCP 8116
D. TCP 19864
Answer: A

CheckPoint   156-315-71   156-315-71参考書   156-315-71   156-315-71

NO.14 How does a cluster member take over the VIP after a failover event?
A. Ping the sync interface
B. if list -renew
C. Broadcast storm
D. Gratuitous ARP
Answer: D

CheckPoint   156-315-71   156-315-71認証試験

NO.15 You are MegaCorp Security Administrator. This company uses a firewall cluster, consisting of two
cluster members. The cluster generally works well but one day you find that the cluster is behaving
strangely. You assume that there is a connectivity problem with the cluster synchronization cluster link
(cross-over cable).
Which of the following commands is the best for testing the connectivity of the crossover cable?
A. telnet <IP address of the synchronization interface on the other cluster member>
B. arping <IP address of the synchronization interface on the other cluster member>
C. ifconfig a
D. Ping <IP address of the synchronization interface on the other cluster member>
Answer: B

CheckPoint   156-315-71   156-315-71認定試験   156-315-71   156-315-71練習問題

NO.16 John is configuring a new R71 Gateway cluster but he can not configure the cluster as Third Party IP
Clustering because this option is not available in Gateway Cluster Properties: What's happening?
A. John is not using third party hardware as IP Clustering is part of Check Point's IP Appliance B .Third
Party Clustering is not available for R71 Security Gateways.
B. ClusterXL needs to be unselected to permit 3rd party clustering configuration.
C. John has an invalid ClusterXL license.
Answer: C

CheckPoint過去問   156-315-71   156-315-71   156-315-71問題集

NO.17 What command will allow you to disable sync on a cluster firewall member?
A. fw ctl setsync 0
B. fw ctl sysnstat stop
C. fw ctl sysnstat off
D. fw ctl setsyns off
Answer: D

CheckPoint認定証   156-315-71   156-315-71認定試験

NO.18 Control connections between the Security Management Server and the Gateway are not encrypted by
the VPN Community. How are these connections secured?
A. They are encrypted and authenticated using SIC.
B. They are not encrypted, but are authenticated by the Gateway
C. They are secured by PPTP
D. They are not secured.
Answer: D

CheckPoint   156-315-71認証試験   156-315-71   156-315-71認証試験   156-315-71

NO.19 Which of the following commands can be used to stop Management portal services?
A. fw stopportal
B. cpportalstop
C. cpstop / portal
D. smartportalstop
Answer: D

CheckPoint認定資格   156-315-71認定資格   156-315-71認証試験   156-315-71   156-315-71

NO.20 You need to publish SecurePlatform routes using the ospf routing protocol. What is the correct
command structure, once entering the route command, to implement ospf successfully?
A. Run cpconfig utility to enable ospf routing
B. ip route ospf
ospf network1
ospf network2
C. Enable
Configure terminal
Router ospf [id]
Network [network] [wildmask] area [id]
D. Use DBedit utility to either the objects_5_0.c file
Answer: C

CheckPoint過去問   156-315-71   156-315-71認定試験

弊社のIT業で経験豊富な専門家たちが正確で、合理的なCheckPoint 156-315-71認証問題集を作り上げました。 弊社の勉強の商品を選んで、多くの時間とエネルギーを節約こともできます。