弊社のSAPのC_TSCM42_64勉強資料を利用したら、きっと試験を受けるための時間とお金を節約できます。JapanCertのSAPのC_TSCM42_64問題集を買う前に、一部の問題と解答を無料にダウンロードすることができます。PDFのバージョンとソフトウェアのバージョンがありますから、ソフトウェアのバージョンを必要としたら、弊社のカスタマーサービススタッフから取得してください。
JapanCertのSAPのC_TSCM42_64試験トレーニング資料が受験生の皆様の評判を取ったのはもう最近のことではないです。これはJapanCertのSAPのC_TSCM42_64試験トレーニング資料は確かに信頼できて、受験生の皆様が首尾よく試験に合格することに助けを差し上げられることが証明されました。 JapanCertのSAPのC_TSCM42_64試験トレーニング資料がベストセラーになって、他のサイトをずっと先んじて皆様の認可を取りましたから、好評は言うまでもないです。 SAPのC_TSCM42_64認定試験を受けたら、速くJapanCertというサイトをクリックしてください。あなたがずっとほしいものを手に入れることができますから。最もプロな人々が注目しているIT専門家になりたかったら、後悔しないように速くショッピングカートを入れましょう。
SAPのC_TSCM42_64認定試験は全てのIT職員にとって大変重要な試験です。この試験に受かったら、あなたは絶対職場に廃れられることはありません。しかも、昇進と高給も実現できます。SAPのC_TSCM42_64試験に受かったら成功への鍵を握ったと言った人もいます。これは間違いないです。JapanCertのSAPのC_TSCM42_64試験トレーニング資料はあなたが成功へのショートカットです。このトレーニング資料を持っていたら、成功への道を見つけます。
この情報の時代には、IT業界にとても注目され、この強い情報技術業界にIT人材が得難いです。こうしてSAP認定試験がとても重要になります。でも、この試験がとても難しくてIT者になりたい方が障害になっています。
JapanCertは専門的なIT認証サイトで、成功率が１００パーセントです。これは多くの受験生に証明されたことです。JapanCertにはIT専門家が組み立てられた団体があります。彼らは受験生の皆さんの重要な利益が保障できるように専門的な知識と豊富な経験を活かして特別に適用性が強いトレーニング資料を研究します。その資料が即ちSAPのC_TSCM42_64試験トレーニング資料で、問題集と解答に含まれていますから。
試験番号：C_TSCM42_64問題集
試験科目：SAP 「SAP Certified Application Associate - Production - Planning & Manufacturing with SAP ERP 6.0 EHP4」
問題と解答：全80問
JapanCertは頼りが強い上にサービスもよくて、もし試験に失敗したら全額で返金いたしてまた一年の無料なアップデートいたします。
C_TSCM42_64試験は簡単ではありません。専門的な知識が必要で、もしあなたはまだこの方面の知識を欠かれば、JapanCertは君に向ける知識を提供いたします。JapanCertの専門家チームは彼らの知識や経験を利用してあなたの知識を広めることを助けています。そしてあなたにC_TSCM42_64試験に関するテスト問題と解答が分析して差し上げるうちにあなたのIT専門知識を固めています。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.japancert.com/C_TSCM42_64.html
NO.1 Which of the following requirements for a manufacturing plant can be supported by using
process
manufacturing? (Choose three.)
A. Master recipe-based manufacturing.
B. Material requirements planning for production resources.
C. Manufacturing without orders.
D. Variable calculation of material quantities (product output, material usage).
E. Manufacturing in charge quantities.
Answer: A,D,E
SAP認証試験 C_TSCM42_64 C_TSCM42_64 C_TSCM42_64練習問題
NO.2 Which one of the following scheduling types cannot be assigned as default to an order type
(production order)?
A. Midpoint
B. Forward
C. Only capacity requirements
D. Backward
Answer: A
SAP問題集 C_TSCM42_64練習問題 C_TSCM42_64
NO.3 Which of the following activities is necessary for the capacity availability check to be carried
out automatically when a production order is released?
A. Activate the availability check and assign a checking rule to the work center for the operation to
be checked.
B. Activate the availability check and assign the check control to the plant.
C. Activate the availability check and assign an overall profile in check control for the business
function order release.
D. Activate the availability check and assign an availability checking group to the material master
for the product to be produced.
Answer: C
SAP C_TSCM42_64 C_TSCM42_64
NO.4 The company that you advise does not want to manage certain value-intensive materials in
the warehouse stock. Instead, the user wishes to control material provision in such a way that these
materials are procured directly for the production and/or process order. How can you fulfill this
request? (Choose two.)
A. Using the special procurement key subcontracting in the material master for the component
B. Using the special procurement key direct procurement/external procurement in the material
master for the component
C. Using the item type non-stock item in the bill of material for the material in question
D. Using the procurement type external procurement in the material master for the component
E. Controlling the material in question as a co-product
Answer: B,C
SAP C_TSCM42_64認証試験 C_TSCM42_64 C_TSCM42_64 C_TSCM42_64
NO.5 In your company planning strategies are used in the SAP-ECC demand management that are
based on consumption. Which of the following statements about consumption is true? (Choose
two.)
A. A consumption situation is dynamic and is always restructured with the planning run.
B. Consumption can also take place between order reservations and planned independent
requirements, depending on the strategy.
C. Consumption always takes place on the material level between the planned independent
requirements and the planned orders.
D. The consumption parameters (consumption mode and consumption interval) can be set in the
material master or in the MRP group.
Answer: B,D
SAP練習問題 C_TSCM42_64 C_TSCM42_64参考書
NO.6 An enterprise based in the USA produces an end product that is used with the unit of
measure"pound" (LB). The material is now to be marketed in the EU. A prerequisite for this is that
the material can be sold with the unit kilogram (KG).
Which of the following solutions does SAP ECC offer?
A. In the basic data customizing, you create a unit of measure group that converts pounds to
kilograms. You then assign this to the material master on basic data view 1.
B. You create a new material with a reference to the original material and assign the metric unit of
measure to the new material master.
C. In the material master, you create a conversion factor for converting pounds to kilograms on
basic data view 1.
D. There is no need to take any action. There is a general conversion in the central customizing of
units of measurements, so that automatic conversion of pounds to kilograms takes place.
Answer: D
SAP C_TSCM42_64練習問題 C_TSCM42_64 C_TSCM42_64参考書
NO.7 The master data for an in-house production process is to be set up in the SAP ECC system. To
do this, you should create a suitable routing that plans for five operations in an initial sequence
(10,20, 30, 40, 50). There should be an option of relocating operations 30 and 40 to a second
sequence on other work centers if there are capacity bottlenecks. What sequence type would you
use to create the second sequence in the system?
A. Substitute sequence
B. Alternative sequence
C. Parallel sequence
D. Standard sequence
Answer: B
SAP C_TSCM42_64 C_TSCM42_64
NO.8 A customer has been using planning strategies 30 (production by lots) and 10 (anonymous
maketo-stock production) in SAP ECC. The customer wishes to move in part to planning strategy 40
(planning with final assembly). The issue of consumption has an effect here for the first time.
Which properties apply for consumption with planning strategy 40? (Choose two.)
A. Consumption can lead to an increase of the originally planned overall production quantity.
B. Consumption can result in the subsequent specification and adjustment of planning elements in
terms of quantity and date, by means of customer orders that arrive.
C. Consumption can reduce the originally planned production quantity.
D. Consumption creates a static and binding assignment, between the planned independent
requirements recorded in advance and the customer requirements that arrive, for the entire
procurement process.
Answer: A,B
SAP認定資格 C_TSCM42_64 C_TSCM42_64 C_TSCM42_64認証試験
NO.9 In the SAP ECC system, a material is produced with the help of production orders. Though
originally used for rate-based planning only, the planning table is to be used to plan this material.
On the initial screen of the planning table, you select this material and then receive a message
informing you that you cannot use the planning table for this material.
Which one of the following reasons for this message applies?
A. The series production indicator has not been set.
B. There is no valid production version for this material.
C. There are no planned orders or production orders present.
D. There are no requirements present.
Answer: B
SAP認定資格 C_TSCM42_64 C_TSCM42_64
NO.10 The user you advise requests that you make it possible for the user to produce materials for
stock,for customer orders, projects, orders and cost centers with production orders.
Where can you make settings to ensure these options?
A. Serial number profile.
B. Settlement profile.
C. Valuation variant.
D. Production scheduling profile.
Answer: B
SAP練習問題 C_TSCM42_64 C_TSCM42_64認定証 C_TSCM42_64認定資格
JapanCertの商品は100%の合格率を保証いたします。JapanCertはITに対応性研究続けて、高品質で低価格な問題集が開発いたしました。JapanCertの商品の最大の特徴は20時間だけ育成課程を通して楽々に合格できます。
没有评论:
发表评论