従来の試験によってJapanCert が今年のNovellの50-682認定試験を予測してもっとも真実に近い問題集を研究し続けます。JapanCertは100%でNovellの50-682認定試験に合格するのを保証いたします。
この情報の時代には、IT業界にとても注目され、この強い情報技術業界にIT人材が得難いです。こうしてNovell認定試験がとても重要になります。でも、この試験がとても難しくてIT者になりたい方が障害になっています。
親愛なる受験生の皆様、何かNovellの50-682試験のトレーニング授業に加入したいのですか。実は措置を取ったら一回で試験に合格することができます。JapanCertのNovellの50-682試験のトレーニング資料はとても良い選択なんですよ。JapanCertの仮想ネットワークトレーニングと授業は大量の問題集に含まれていますから、ぜひあなたが気楽に試験に合格することを約束します。
しかし、50-682試験は簡単ではありません。専門的な知識が必要で、もしあなたはまだこの方面の知識を欠かれば、JapanCertは君に向ける知識を提供いたします。JapanCertの専門家チームは彼らの知識や経験を利用してあなたの知識を広めることを助けています。そしてあなたに50-682試験に関するテスト問題と解答が分析して差し上げるうちにあなたのIT専門知識を固めています。
JapanCert のNovellの50-682問題集は最も徹底的で、最も正確で、かつアップ·ツー·デートなものです。当面の市場であなたに初めて困難を乗り越える信心を差し上げられるユニークなソフトです。Novellの50-682認証試験は世界でどの国でも承認されて、すべての国が分け隔てをしないの試験です。JapanCert のNovellの50-682認証証明書はあなたが自分の知識と技能を高めることに助けになれることだけでなく、さまざまな条件であなたのキャリアを助けることもできます。JapanCert のNovellの50-682問題集を利用することをお勧めいたします。
試験番号：50-682問題集
試験科目：Novell 「Advanced Novell Network Management 」
最近更新時間：2013-09-16
問題と解答：145
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.japancert.com/50-682.html
NO.1 .Which preconfigured report searched the entire tree, communicates with every NetWare
server it finds, and reports errors?
A. Agent Health
B. Obituary Listing
C. Object Statistics
D. Server Information
E. Service Advertising
Answer: D
Novell練習問題 50-682認定証 50-682 50-682練習問題
NO.2 .When performing a migration to a NetWare 6 server, which are valid statements
regarding copying volumes? (Choose two)
A. The volumes cannot be compressed.
B. The source and destination server's volumes must be NSS.
C. You do not need to copy all of the volumes at the same time.
D. The source and destination server's volume size must be the same.
E. The source and destination server's volume names must be the same.
Answer: C, E
Novell問題集 50-682認証試験 50-682練習問題 50-682
NO.3 When checking the state of a cluster resource, what color will the resource appear as, if it
is unknown?
A. Red
B. Gray
C. Green
D. Yellow
E. Blank (or no color)
Answer: B
Novell 50-682認定資格 50-682 50-682問題集 50-682
NO.4 Click on the object that will allow you to view start, failover, and failback node
settings.
Answer:
NO.5 Which are tools you can use at the server console prompt to help troubleshoot IP
problems? (Choose two)
A. PING
B. TCPCON
C. NETSTAT
D. TRACERT
E. IPCONFIG
Answer: A, B
Novell認定試験 50-682認定証 50-682
NO.6 .An iFolder user has discovered that new files are not being synchronized to his
server, while at the same time changes to existing files are being synchronized.
What is the most likely cause of the problem?
A. The conflict bin is too small.
B. Corrupted file maps are dirmaps.
C. The computer does not have sync rights.
D. The server does not have enough disk space.
Answer: B
Novell問題集 50-682 50-682
NO.7 .There are problems when starting your NetWare 6 server.
Which command helps to identify at which point modules are loading during the server
startup?
A. LIST
B. CONFIG
C. STARTUP
D. MODULES
E. LIST STAGE
Answer: E
Novell 50-682認定資格 50-682
NO.8 .When does synthetic time occur in an eDirectory tree?
A. When there is no time source in the tree.
B. When a secondary server acts like a time source.
C. When time is not synchronized throughout the network.
D. When an object is modified within the same second from two different sources.
E. When an eDirectory object has a modification time stamp in the future of the current
network time.
Answer: E
Novell認定試験 50-682過去問 50-682 50-682過去問
NO.9 .When NCS casts off an isolated slave node, the slave node takes a poison pill and
abends.
Which statement is true regarding the poison pill?
A. The master node sends a poison pill directly to the isolated node.
B. Any of the non-isolated nodes send a poison pill directly to the isolated node.
C. The isolated node recognizes it is not receiving heartbeats from the master node and
then takes the poison pill.
D. The isolated node realizes that its epoch number does not match the other nodes epoch
number and then takes the poison pill.
E. The isolated node reads a special token on the SBD partition that was created by the
other nodes and then takes the poison pill.
Answer: E
Novell 50-682 50-682 50-682
NO.10 Which abend is almost always memory related?
A. Page fault
B. Invalid Opcode
C. Non Maskable Interrupt
D. General Protection Processor Exception
E. Ate Poison Pill in SbdWriteNode Tick given by some other node.
Answer: C
Novell過去問 50-682認定試験 50-682 50-682認証試験 50-682 50-682参考書
NO.11 .What are cluster-aware applications for NCS 1.6? (Choose two)
A. iManager
B. ManageWise
C. DHCP Server
D. RealOne player
E. Queue-based printing
Answer: A, C
Novell認定試験 50-682問題集 50-682 50-682認証試験
NO.12 In a NCS environment, a resource state of ALERT has been placed on a resource.
What is a reason that a resource would be in an ALERT state?
A. The resource is shut down or in an inactive state.
B. The resource is unloading from the server it was running on.
C. The resource is not running and requires administrator intervention.
D. There isn't an assigned node up that the resource can be loaded on.
E. The Start, Failover, or Failback mode for the resource has been set to manual.
Answer: E
Novell 50-682 50-682 50-682
NO.13 .Shown are properties of the DACLUSTER object. There are applications in the
cluster that you want to load before others.
Click on the tab that will allow you to specify the order that applications load within
the cluster.
Answer:
NO.14 You just added a second hard drive to your RAID system. Click the area of the graphic
that redistributes data across all RAID devices, including the new hard drive.
Answer:
Explanation: Click on Restripe
page 6-9 Restriping redistributes data across all Raid devices, including the new hard
drive.
NO.15 .You are working in a pure IP environment and the workstation is not
communicating with the server.
Which are some valid troubleshooting steps that can be executed on the workstation to
help identify the problem? (Choose three)
A. Ping the server.
B. Use TRACERT.
C. Verify that DSTRACE is not running.
D. Use CONFIG to verify that the network board is bound.
E. Verify the workstation IP address with the IPCONFIG command.
F. RUN DSTRACE to verify there are no DS communication issues between the
workstation and server.
Answer: A, B, E
Novell 50-682過去問 50-682問題集 50-682認証試験 50-682
NO.16 .You have just completed installing NCS and are now going to create a shared disk
partition.
Which utility is used to create a shared disk partition?
A. iMonitor
B. iManager
C. ConsoleOne
D. Server Manager
E. NWCONFIG.NLM
Answer: C
Novell 50-682 50-682問題集
NO.17 Which is a useful troubleshooting step if a server is not communicating?
A. Verify that cache buffers are over 20%.
B. Verify that the server is not out of packet receive buffers.
C. Verify that the DOS=HIGH command is not in CONFIG.SYS.
D. Remove memory managers from loading in AUTOEXEC.NCF.
Answer: B
Novell認定資格 50-682問題集 50-682認定資格 50-682 50-682過去問
NO.18 After a NetWare 6 server migration, you have noticed that device drivers are not
loading. These drivers need to be placed in the directory where SERVER.EXE
resides.
Where can you copy these drivers from?
A. C:\DRIVERS
B. SYS:SYSTEM
C. STS:ETC\DRIVERS
D. SYS:SYSTEM\DRIVERS
E. C:\NWSERVER\DRIVERS
Answer: E
Novell 50-682 50-682
NO.19 .You want to modify your NCS environment by changing node assignment to
resource using ConsoleOne.
Which object's properties page allows you to change node assignments?
A. Any node object
B. The cluster object
C. The master node object
D. The Cluster ADMIN object
E. Any cluster-enabled resource or volume object
Answer: B
Novell 50-682 50-682 50-682
NO.20 .DRAG DROP
Listed are the SET parameters used that instruct the server how to respond to an
abend and the description for each SET parameter.
Drag the parameter to the appropriate description.
Answer:
NO.21 Using the UAL licensing model, where is it recommended to install user license if the
server object resides in the FLIGHTOPS.DEL.DIGITALAIR container and the user
objects reside in the CUSTSERV.DEL.DIGITALAIR container?
A. In any container.
B. In the Security container.
C. In the DIGITALAIR container.
D. In the CUSTSERV.DEL.DIGITALAIR container.
E. In the CUSTSERV.DEL.DIGITALAIR or DEL.DIGITALAIR containers.
F. In the FLIGHTOPS.DEL.DIGITALAIR or DEL.DIGITALAIR containers.
Answer: E
Novell 50-682 50-682
NO.22 .Which utility allows you to type in commands at the server console screen?
A. iMonitor
B. iManager
C. ConsoleOne
D. Server Manager
E. Remote Manager
Answer: E
Novell認証試験 50-682 50-682認定証 50-682過去問
NO.23 .What happens during the Finish eDirectory Migration stage of a server migration to
NetWare 6 process? (Choose two)
A. The NICI files are copied.
B. The licenses are installed.
C. The volume objects are updated.
D. The destination server is restarted.
E. The file trustee assignment are restored.
Answer: C, E
Novell練習問題 50-682過去問 50-682
NO.24 .Which statements are true about the source server when doing a server migration to
NetWare 6? (Choose two)
A. The source server must be running IP.
B. Any NetWare 3.x server and higher can be migrated to NetWare 6.
C. The source server's volumes must be the same size as the destination server's volumes.
D. If the source server is NetWare 4, the volumes must have long name space support
added.
E. The person performing the migration must have the Supervisor right to the source
server's file system.
Answer: D, E
Novell 50-682 50-682
NO.25 .Which tool is used to fix problems with an NSS pool that could not be corrected with
other techniques?
A. VCU
B. VERIFY
C. REPAIR
D. REBUILD
E. NSSSCAN
F. POOLREPAIR
Answer: D
Novell練習問題 50-682練習問題 50-682過去問 50-682問題集
NO.26 Which RAID levels can be implemented with NSS? (Choose two)
A. 0
B. 1
C. 2
D. 3
E. 4
F. 5
G. 6
H. 7
Answer: A,B
Novell練習問題 50-682問題集 50-682 50-682
NO.27 .If an object is missing a mandatory attribute, how will this object be displayed in
ConsoleOne?
A. As a grayed-out object.
B. As a black-and-white object.
C. As a mark in a circle.
D. As a mar in a square.
E. As two numbers with a dash between them (eg. 9-6).
Answer: C
Novell 50-682認定証 50-682 50-682
NO.28 .Click on the object that will allow you to specify the amount of time to wait for
nodes to join the cluster.
Answer:
NO.29 .You have setup load and unload scripts for resource in your NCS environment and
have specified a timeout value of 300 seconds for each resource.
What will happen to the resource if it doesn't get through the load script in 300 seconds?
A. It is put into an ALERT state.
B. It is put into an OFFLINE state.
C. It is put into a COMATOSE state.
D. It is put into an UNASSIGNED state.
E. It is put into a QUORUM WAIT state.
Answer: C
Novell問題集 50-682 50-682 50-682 50-682
NO.30 .In order to change the IP address of your NetWare iFolder server, which files must be
manually modified? (Choose four)
A. HTTPD.CONF
B. iFolderClient.exe
C. AUTOEXEC.NCF
D. STOPIFOLDER.NCF
E. STARTIFOLDER.NCF
F. HTTPD_ADDITIONS_MW.CONF
Answer: A, B, C, F
Novell 50-682認定試験 50-682認証試験 50-682
JapanCertは最新のHH0-240問題集と高品質のMB5-854問題と回答を提供します。JapanCertのMB7-702 VCEテストエンジンと70-323試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質のLOT-441 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。
没有评论:
发表评论