今の競争の激しいIT業界ではAlcatel-Lucentの4A0-M01試験にパスした方はメリットがおおくなります。給料もほかの人と比べて高くて仕事の内容も豊富です。でも、この試験はそれほど簡単ではありません。
君はほかのサイトや書籍もブラウズ するがもしれませんが、弊社の関連の学習資料と比較してからJapanCertの商品の範囲が広くてまたネット上でダウンロードを発見してしまいました。JapanCertだけ全面と高品質の問題集があるのではJapanCertの専門家チームが彼らの長年のIT知識と豊富な経験で研究してしました。そして、JapanCertに多くの受験生の歓迎されます。
この情報の時代には、IT業界にとても注目され、この強い情報技術業界にIT人材が得難いです。こうしてAlcatel-Lucent認定試験がとても重要になります。でも、この試験がとても難しくてIT者になりたい方が障害になっています。
JapanCertはAlcatel-Lucentの4A0-M01認定試験についてすべて資料を提供するの唯一サイトでございます。受験者はJapanCertが提供した資料を利用して4A0-M01認証試験は問題にならないだけでなく、高い点数も合格することができます。
JapanCertは専門的に IT認証試験に関する資料を提供するサイトで、１００パーセントの合格率を保証できます。それもほとんどの受験生はJapanCertを選んだ理由です。JapanCertはいつまでも受験生のニーズに注目していて、できるだけ皆様のニーズを満たします。 JapanCertのAlcatel-Lucentの4A0-M01試験トレーニング資料は今までがないIT認証のトレーニング資料ですから、JapanCertを利用したら、あなたのキャリアは順調に進むことができるようになります。
JapanCertは専門的な、受験生の皆さんを対象とした最も先進的なAlcatel-Lucentの4A0-M01試験の認証資料を提供しているサイトです。JapanCertを利用したら、Alcatel-Lucentの4A0-M01試験に合格するのを心配することはないです。
試験番号：4A0-M01問題集
試験科目：Alcatel-Lucent 「Alcatel-Lucent IP/MPLS Mobile Backhaul Transport」
最近更新時間：2013-11-18
問題と解答：150
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.japancert.com/4A0-M01.html
NO.1 When researching carrier-class Ethernet standards to support the mobile backhaul Ethernet transport,
which standards body would you consult?
A. IEEE
B. MEF
C. ITU-T
D. NGMN
Answer: B
Alcatel-Lucent認定証 4A0-M01問題集 4A0-M01認定資格 4A0-M01認定証
NO.2 Which is a characteristic of the IEEE 802.3 Slow Protocol?
A. There are a maximum of 10 frames transmitted per second
B. There are a maximum of 20 slow protocol subtypes per interface
C. The maximum slow protocol frame size is 64 bytes
D. The slow protocol header carries the clock quality level
Answer: A
Alcatel-Lucent過去問 4A0-M01認定資格 4A0-M01 4A0-M01認証試験
NO.3 In the Alcatel-Lucent SROS, which command creates the OC-3 path's Administrative Unit (AU)-4 Virtual
Container (VC) capacity?
A. configure port 3/1/2 sonet-sdh path au-4
B. configure port 3/1/2 sonet-sdh path sts3
C. configure port 3/1/2 sonet-sdh path tug-3
D. configure port 3/1/2 sonet-sdh path vc-4
Answer: B
Alcatel-Lucent 4A0-M01 4A0-M01 4A0-M01認証試験
NO.4 Click on the exhibit.
The command result indicates which condition on the Inverse Multiplexing over ATM (IMA) bundle?
A. The number of active links has dropped belowthe minimum threshold
B. The associated Layer 3 interface is administratively down
C. The remote IMA bundle is administrativelydown
D. The parent OC-3 is operationally down
Answer: C
Alcatel-Lucent問題集 4A0-M01 4A0-M01 4A0-M01過去問 4A0-M01 4A0-M01参考書
NO.5 Click on the exhibit.
Consider the topology and MLS1 configuration shown, and given the following conditions:
* MLS1 delivers the PRC traceable clock to the network
* Reference 1 receives Quality Level (QL) - EEC1
* Reference 2 receives QL - SSU-A
* BITS sets QL-SSU-B
Which quality level will MLS1 deliver to POC2-1 on its Synchronous Ethernet (SyncE) port 1/2/7?
A. QL-EEC1
B. QL-PRC
C. QL-SSU-A
D. QL-STU
Answer: B
Alcatel-Lucent過去問 4A0-M01認定試験 4A0-M01練習問題 4A0-M01
NO.6 If an IEEE 1588v2/Precision Time Protocol (PTP) v2 slave times out announce messages with the
master, to which state does the slave port transition to choose another potential master?
A. Initial
B. Listening
C. Passive
D. Un-calibrated
Answer: B
Alcatel-Lucent認証試験 4A0-M01 4A0-M01 4A0-M01認定証 4A0-M01問題集
NO.7 Which statement correctly describes the Point-to-Point (PPP) Multilink Protocol (MP) negotiation
process?
A. At least one link must complete Link Control Protocol (LCP) negotiations before the bundle can
initialize
B. The endpoints indicate their desire to implement MP in the link Network Control Protocol (NCP) phase
C. The bundle must complete LCP negotiations before it can enter the NCP negotiation phase
D. Internet Protocol-Control Protocol (IPCP) negotiations must succeed for the bundle links to initialize
Answer: A
Alcatel-Lucent 4A0-M01 4A0-M01認定試験
NO.8 Click on the exhibit.
On the OC-3 port, each provisioned channel group contains all available timeslots
The command result illustrates which OC-3 port characteristic?
A. On STS1-1,the second VT1.5 in the second VTG is set for IPCP encapsulation
B. On STS1-1,the second DS1 channel group in the second VTG isoperationallyup
C. On STS1-1, the second E1 channel group in the second TUG-2 is operationally up
D. On STS1-1, the second VT2 in the second TUG-2 is set for IPCP encapsulation
Answer: C
Alcatel-Lucent 4A0-M01 4A0-M01 4A0-M01
NO.9 Which statement best describes adaptive timing techniques?
A. Adaptive timing calculates the time of day from time stamped packets
B. Adaptive timing calculates the time of day from the arriving packet rate
C. Adaptive timing only supports frequency synchronization
D. Adaptive timing only operates on point-to-point links
Answer: A
Alcatel-Lucent練習問題 4A0-M01練習問題 4A0-M01認証試験 4A0-M01
NO.10 Which messages, periodically sent between an IEEE 1588v2/Precision Time Protocol (PTP) v2 master
and slave, serve as hellos to help the slave choose the best available master?
A. Announce
B. Announce_grant
C. Sync
D. Delay_response
Answer: A
Alcatel-Lucent 4A0-M01参考書 4A0-M01過去問
NO.11 In the Alcatel-Lucent SROS, which payload type set in a SDH-framed OC-12 port creates individual E1
containers?
A. Virtual Tributary (VT) 1.5
B. VT2
C. Virtual Container (VC)-11
D. VC-12
Answer: B
Alcatel-Lucent 4A0-M01 4A0-M01練習問題
NO.12 Click on the exhibit.
Given the following:
On the OC-3 port, each provisioned channel group contains all available timeslots.
The command result illustrates which circuit status?
A. The E1 channel group is administratively turned down
B. The DS1 circuit physical link is operationally down
C. The IMA bundle has no operational member links
D. The associated Layer 3 interface is operationallydown
Answer: B
Alcatel-Lucent 4A0-M01認定試験 4A0-M01認定資格 4A0-M01認定資格 4A0-M01 4A0-M01
NO.13 Click on the exhibit.
Consider the topology and MLS1 configuration shown, and given the following conditions:
-MLS1 delivers the PRC traceable clock to the network
-Reference 1 receives Quality Level (QL) - ST3
-Reference 2 receives QL - DUS
-BITS sets QL-STU
Which quality level will MLS1 deliver to POC2-1 on its Synchronous Ethernet (SyncE) port 1/2/7?
A. QL-EEC2
B. QL-PRS
C. QL-ST3
D. QL-STU
Answer: C
Alcatel-Lucent 4A0-M01練習問題 4A0-M01認定試験 4A0-M01参考書 4A0-M01
NO.14 An SROS router obtains its timing exclusively from its BITS input port. The router sets Quality Level
(QL) SONET Traceability Unknown (STU) on this Superframe (SF) framed DS1 BITS reference.
What must you configure on this master router to pass the best clock quality level to the downstream
Synchronous Ethernet (SyncE) slave nodes while maintaining traceability to the DS1 source?
A. Enable "ql-override prs" on the BITS reference
B. Enable "ql-override prs" on the master's SyncE ports
C. Enable "ql-selection prs" on the BITS reference
D. Set the master router to choose its source by quality level
Answer: A
Alcatel-Lucent 4A0-M01認定証 4A0-M01
NO.15 Click on the exhibit.
Given the show command results shown:
With what IEEE 1588v2/Precision Time Protocol (PTP) v2 message did the slave node set the Unicast
message rates used by the master?
A. Announce granted
B. Announce request
C. Sync granted
D. Sync request
Answer: B
Alcatel-Lucent認定試験 4A0-M01参考書 4A0-M01練習問題
NO.16 Click on the exhibit.
Given the show command results shown:
Which IEEE 1588v2/Precision Time Protocol (PTP) v2 parent clock value does the slave first consider
when choosing its master?
A. GM Clock Priority1
B. GM Clock ID
C. GM Clock Priority2
D. GM Clock Class
Answer: D
Alcatel-Lucent認定証 4A0-M01 4A0-M01参考書 4A0-M01問題集
NO.17 Which synchronization technique supports time of day and phase synchronization?
A. IEEE 1588 v2/Precision Time Protocol (PTP)v2
B. Adaptive Clock Recovery (ACR)
C. Time Division Multiplexing (TDM) line timing
D. Synchronization Ethernet (SyncE)/Synchronization Status Message (SSM)
Answer: A
Alcatel-Lucent 4A0-M01 4A0-M01認定証 4A0-M01 4A0-M01
NO.18 The IETF is know for which standardization effort.?
A. It develops recommendations for core network functionality, broadband service delivery and next
generation services
B. It maintains Requests for Comment (RFC) that describe technical solutions to Internet challenges
C. It creates single, integrated network design guidelines to support mobile broadband services
D. It develops radio access services and systems for high capacity mobile networks
Answer: B
Alcatel-Lucent認定証 4A0-M01 4A0-M01認証試験 4A0-M01
NO.19 Which timing technique can deliver time of day and phase synchronization information to the base
station without concern for Packet Delay Variation (PDV)?
A. Building Integrated Timing Supply (BITS)
B. Global Positioning System (GPS)
C. Adaptive Clock Recovery (ACR)
D. IEEE 1588v2/Precision Time Protocol (PTP)
Answer: B
Alcatel-Lucent認定資格 4A0-M01 4A0-M01 4A0-M01練習問題 4A0-M01
NO.20 Click on the exhibit.
Given the configuration shown and the following conditions:
* The external reference is offline
* Reference 1 receives Quality Level (QL) - EEC1
* Reference 2 receives QL - SSU-A
Which quality level will the SAR router advertise to its Synchronous Ethernet (SyncE) peers?
A. QL-DNU
B. QL-EEC1
C. QL-SSU-A
D. QL-PRC
E. QL-UNC
Answer: B
Alcatel-Lucent 4A0-M01 4A0-M01認定試験
JapanCertは最新のHP2-N40問題集と高品質の70-460問題と回答を提供します。JapanCertの000-955 VCEテストエンジンとIIA-CIA-Part3試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質のIIA-CFSA PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。
没有评论:
发表评论