JapanCertが提供した対応性の訓練問題をテストにして初めてOMGのOMG-OCUP-100認定試験に参加する受験者の最もよいな選択でございます。真実試験問題が似てるのを確保することができて一回合格するのは目標にしています。もし試験に失敗したら、弊社が全額で返金いたします。
この人材があちこちいる社会で、多くのプレッシャーを感じませんか。学歴はどんなに高くても実力を代表できません。学歴はただ踏み台だけで、あなたの地位を確保できる礎は実力です。OMGのOMG-OCUP-100認定試験は人気がある認証で、その認証を持ちたい人がたくさんいます。この試験に受かったら自分のキャリアを固定することができます。JapanCertのOMGのOMG-OCUP-100試験トレーニング資料はとても良いトレーニングツールで、あなたが首尾よく試験に合格ことを助けられます。試験に合格したら、あなたは国際的に認可され、解雇される心配する必要はありません。
JapanCertは当面最新のOMGのOMG-OCUP-100の認証試験の準備問題を提供している認証された候補者のリーダーです。弊社の資源はずっと改訂され、アップデートされていますから、緊密な相関関係があります。OMGのOMG-OCUP-100の認証試験を準備しているあなたは、自分がトレーニングを選んで、しかも次の問題を受かったほうがいいです。弊社の試験問題はほとんど毎月で一回アップデートしますから、あなたは市場で一番新鮮な、しかも依頼できる良い資源を得ることができることを保証いたします。
JapanCertはたくさんIT関連認定試験の受験者に利便性を提供して、多くの人がJapanCertの問題集を使うので試験に合格しますた。彼らはJapanCertの問題集が有効なこと確認しました。JapanCertが提供しておりますのは専門家チームの研究した問題と真題で弊社の高い名誉はたぶり信頼をうけられます。安心で弊社の商品を使うために無料なサンブルをダウンロードしてください。
全てのIT職員はOMGのOMG-OCUP-100試験をよく知っています。これは一般的に認められている最高級の認証で、あなたのキャリアにヘルプを与えられます。あなたはその認証を持っているのですか。OMGのOMG-OCUP-100試験は非常に難しい試験ですが、JapanCertのOMGのOMG-OCUP-100試験トレーニング資料を手に入れたら大丈夫です。試験が難しいと感じるのは良い方法を選択しないからです。JapanCertを選んだら、成功の手を握ることがきるようになります。
試験番号：OMG-OCUP-100問題集
試験科目：OMG 「OMG-Certified UML Professional Fundamental Exam」
最近更新時間：2014-02-16
問題と解答：168
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.japancert.com/OMG-OCUP-100.html
NO.1 What is true of the black diamond on the diagram? ose two)
A. A Line Item cannot be removed from its Order.
B. A Line Item may only be included in one Order at a time.
C. If an Order is deleted, its Line Item instances normally still remain.
D. If an Order is deleted, its Line Item instances are normally deleted.
E. A Line Item may only be included in more than one Order at a time.
Answer: B,D
OMG練習問題 OMG-OCUP-100 OMG-OCUP-100過去問
NO.2 In the exhibit, what is the meaning of size in these two diagrams?
A. Only one or the other should be used, not both, in order to avoid a name conflict.
B. The size end name on the association indicates data storage and the attribute does not.
C. There is one size property diagrammed both as an attribute and as an association end.
D. There are two size properties that have no name conflict as long as each size is private.
E. The size attribute in the class indicates that it will be stored within the class and the end name does
not.
Answer: C
OMG参考書 OMG-OCUP-100 OMG-OCUP-100練習問題 OMG-OCUP-100
NO.3 What does the arrow end of a dependency relationship indicate?
A. more general classifier
B. element initiates communication
C. whole in a whole-part relationship
D. client element is affected by a change in the supplier element
E. supplier element is unaffected by a change in the client element
Answer: E
OMG OMG-OCUP-100 OMG-OCUP-100 OMG-OCUP-100
NO.4 What are some of the important semantics of packages? ose three)
A. A class may be owned by multiple packages.
B. An element may be owned by at most one package.
C. The public contents of a package are accessible outside the package.
D. The public contents of a package are not accessible outside the package.
E. If a package is removed from a model, the owned contents are removed.
F. If a package is removed from a model, the owned contents are reassigned.
Answer: B,C,E
OMG OMG-OCUP-100参考書 OMG-OCUP-100 OMG-OCUP-100
NO.5 What is an expression in UML 2.0?
A. comment placed on a diagram
B. symbol or symbols signifying a set of value
C. graphical addition to a diagramming element
D. language-specific string used to describe the meaning of a diagram
E. language-specific text string used to describe the contents of a diagram
Answer: B
OMG OMG-OCUP-100過去問 OMG-OCUP-100 OMG-OCUP-100 OMG-OCUP-100認定資格
NO.6 The instance diagram in the exhibit contains father and son without underlines. What is the meaning of
this?
A. The Don class is a superclass of the Josh class.
B. An association having end names father and son.
C. The diagram is a mixture of class and instance diagrams.
D. A link of an association having end names father and son.
E. The names are incorrectly specified, because underlined names are required.
Answer: D
OMG認定試験 OMG-OCUP-100認定証 OMG-OCUP-100過去問 OMG-OCUP-100
NO.7 What does it mean when a classifier rectangle is labeled as an <<eration>>?
A. The list of all public and private features is provided.
B. The classifier is an iterator for traversing a collection.
C. The list of all public and private structural features is suppressed.
D. The classifier is a data type whose values are possibly listed in the bottom compartment.
Answer: D
OMG OMG-OCUP-100 OMG-OCUP-100 OMG-OCUP-100練習問題
NO.8 What are the association end names in the exhibit?
A. Person and Order
B. customer and Order
C. 1 and *
D. 1, *, customer, and Order
E. 1, *, customer, order, Person, and Order
Answer: B
OMG練習問題 OMG-OCUP-100認定証 OMG-OCUP-100練習問題 OMG-OCUP-100参考書 OMG-OCUP-100
NO.9 What does an association specify?
A. tuples that are not links
B. relationship among models
C. links between associated types
D. links between instances of associated types
E. links between instances of untyped classes
Answer: D
OMG OMG-OCUP-100練習問題 OMG-OCUP-100認定資格 OMG-OCUP-100
NO.10 What is true of the import example in the exhibit?
A. Webshop is imported into ShoppingCart and then further imported into Auxiliary and Types.
B. Auxiliary and Types are imported into ShoppingCart, but neither can be further imported into WebShop.
C. Public members of WebShop are imported into ShoppingCart and then further imported into Auxiliary
or Types.
D. Public members of Types and Auxiliary are imported into ShoppingCart and then further imported into
WebShop.
E. Public members of Types and Auxiliary are imported into ShoppingCart and those from Types are
further imported into WebShop.
Answer: E
OMG OMG-OCUP-100認証試験 OMG-OCUP-100 OMG-OCUP-100練習問題
NO.11 What does an {ordered} designator do for a multiplicity?
A. specifies that values are sequentially ordered
B. specifies an inclusive interval of non-negative integers
C. indicates the correct sequence of messages in a sequence diagram
D. indicates that the upper bound must be greater than the lower bound for the multiplicity
Answer: A
OMG OMG-OCUP-100認定試験 OMG-OCUP-100認定試験 OMG-OCUP-100問題集 OMG-OCUP-100 OMG-OCUP-100練習問題
NO.12 What is an element in UML 2.0?
A. member of a set
B. instance of a class
C. constituent of a model
D. abstract metaclass with only one superclass
E. substance not separable by ordinary chemical means
Answer: C
OMG認定証 OMG-OCUP-100認定試験 OMG-OCUP-100 OMG-OCUP-100 OMG-OCUP-100 OMG-OCUP-100
NO.13 What is true about every named element that is a member of a namespace?
A. It is owned by the namespace.
B. It has one unique name within the namespace.
C. It is identified by its name within the namespace.
D. It can be distinguished from other members in the namespace.
Answer: D
OMG練習問題 OMG-OCUP-100 OMG-OCUP-100認定証 OMG-OCUP-100過去問
NO.14 What is true about a comment in UML 2.0? (Choose two)
A. is shown as a note symbol
B. must be attached to at most one element
C. contains only machine-readable symbols
D. can be attached to more than one element
E. connections are always shown with a dashed line
Answer: A,D
OMG OMG-OCUP-100 OMG-OCUP-100 OMG-OCUP-100認定資格 OMG-OCUP-100認定試験
NO.15 What is the meaning of the subsets constraint in the diagram?
A. D is a subclass of B.
B. D contains a subset of instances of C.
C. The collection of b is a subset of the collection of d for each A.
D. The collection of d is a subset of the collection of b for each C.
E. The collection of c is a subset of the collection of b for each D.
Answer: D
OMG練習問題 OMG-OCUP-100 OMG-OCUP-100
NO.16 What does a <<use>>endency mean in a relationship between one element and another?
A. specifies how it uses another element
B. specifies how it realizes another element
C. specifies how one element implements another element
D. requires another element for its full implementation or operation
Answer: D
OMG認定試験 OMG-OCUP-100 OMG-OCUP-100練習問題 OMG-OCUP-100練習問題 OMG-OCUP-100認定試験
NO.17 A property is a feature that can be represented in what ways? ose two)
A. as an association
B. as an association end
C. as an attribute in a class
D. as an operation in a class
E. as an indication of whether the feature is public or private
Answer: B,C
OMG認定証 OMG-OCUP-100認定試験 OMG-OCUP-100 OMG-OCUP-100 OMG-OCUP-100
NO.18 What is a relationship in UML 2.0.?
A. the state of being related
B. an element that has no derived union
C. an element that has no derived composition
D. an element that must have two owned elements
E. an element that specifies a connection between elements
Answer: E
OMG問題集 OMG-OCUP-100認定試験 OMG-OCUP-100 OMG-OCUP-100過去問 OMG-OCUP-100
NO.19 What statements are true of the <<it>>endency in the exhibit? (Choose two)
A. X can access only the baz property of W.
B. X can access the baz and quux properties of W.
C. X can access only the quux property of W.
D. W can access only the foo property of X.
E. W can access the foo and bar properties of X.
F. W can access only the bar property of X.
Answer: B,F
OMG OMG-OCUP-100参考書 OMG-OCUP-100練習問題 OMG-OCUP-100 OMG-OCUP-100
NO.20 Constraints are shown using what symbols?
A. [ ]
B. ( )
C. { }
D. ?"
E. " "
Answer: C
OMG参考書 OMG-OCUP-100認証試験 OMG-OCUP-100認定試験
JapanCertは最新のC_TBIT44_731問題集と高品質のHP0-S34問題と回答を提供します。JapanCertのC-TFIN52-64 VCEテストエンジンと000-156試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質のC-TSCM62-65 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。
没有评论:
发表评论