2013年11月9日星期六

IBM 000-744認定試験の過去問を探しているならコレを使おう

あなたの目標はとても高いですから、あなたに色々なヘルプをあげられる資料が必要です。JapanCert IBMの000-744試験問題集はあなたが自分の目標を達成することを助けられます。JapanCert IBMの000-744問題資料は高度に認証されたIT領域の専門家の経験と創造を含めているものです。当社の製品は、すべての可能性のある問題を試させられます。受験生の皆様に問題の100パーセント真実な解答を提供することを保証します。

最近、IBMの認定試験はますます人気があるようになっています。それと同時に、IBMの認証資格ももっと重要になっています。IT業界では広く認可されている試験として、000-744認定試験はIBMの中の最も重要な試験の一つです。この試験の認証資格を取ったら、あなたは多くの利益を得ることができます。あなたもこの試験を受ける予定があれば、JapanCertの000-744問題集は試験に準備するときに欠くことができないツールです。この問題集は000-744認定試験に関連する最も優秀な参考書ですから。

親愛なる受験生の皆様、何かIBMの000-744試験のトレーニング授業に加入したいのですか。実は措置を取ったら一回で試験に合格することができます。JapanCertのIBMの000-744試験のトレーニング資料はとても良い選択なんですよ。JapanCertの仮想ネットワークトレーニングと授業は大量の問題集に含まれていますから、ぜひあなたが気楽に試験に合格することを約束します。

多くの人々は高い難度のIT認証試験に合格するのは専門の知識が必要だと思います。それは確かにそうですが、その知識を身につけることは難しくないとといわれています。IT業界ではさらに強くなるために強い専門知識が必要です。

IT認証試験に合格したい受験生の皆さんはきっと試験の準備をするために大変悩んでいるでしょう。しかし準備しなければならないのですから、落ち着かない心理になりました。しかし、JapanCertのIBMの000-744トレーニング資料を利用してから、その落ち着かない心はなくなった人がたくさんいます。JapanCertのIBMの000-744トレーニング資料を持っていたら、自信を持つようになります。試験に合格しない心配する必要がないですから、気楽に試験を受けることができます。これは心のヘルプだけではなく、試験に合格することで、明るい明日を持つこともできるようになります。

IBMの000-744は専門知識と情報技術の検査として認証試験で、JapanCertはあなたに一日早くIBMの認証試験に合格させて、多くの人が大量の時間とエネルギーを費やしても無駄になりました。JapanCertにその問題が心配でなく、わずか20時間と少ないお金をを使って楽に試験に合格することができます。JapanCertは君に対して特別の訓練を提供しています。

JapanCertのIBMの000-744の試験問題と解答はあなたが受験する前にすべての必要とした準備資料を提供しています。IBMの000-744の認証試験について、あなたは異なるサイトや書籍で色々な問題を見つけることができます。しかし、ロジックが接続されているかどうかはキーです。JapanCertの問題と解答は初めに試験を受けるあなたが気楽に成功することを助けるだけではなく、あなたの貴重な時間を節約することもできます。

試験番号:000-744問題集
試験科目:IBM 「DS4000 Technical Version 1」
最近更新時間:2013-11-08
問題と解答:140

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.japancert.com/000-744.html

NO.1 How do you configure SNMP traps in the Storage Manager GUI?
A. from the Subsystem Management window, use the Storage Subsystem menu
B. from the Subsystem Management window, use the Advanced menu
C. from the Enterprise Management window, use the Advanced menu
D. from the Enterprise Management window, use the Edit menu
Answer: D

IBM   000-744参考書   000-744認定試験   000-744   000-744問題集

NO.2 You have been called in to assist the storage administrator who has been using Global Mirror with an
Enhanced Remote Mirroring (ERM) configuration to mirror the company inventory database from
headquarters to a data warehouse at a remote site. The storage administrator has been re-evaluating this
approach and needs your help to change the mirroring mode to Metro Mirroring for better control over
data going to the remote site. What must you do to help the storage administrator make the change?
A. advise the storage administrator to purchase two new licenses
B. break and re-establish the mirror relationship
C. back up the inventory data to tape
D. make the mode change in Storage Manager
Answer: D

IBM認定試験   000-744過去問   000-744   000-744認定試験   000-744過去問

NO.3 When configuring a customer's multimedia sequential I/O environment, what must you do?
A. use a small segment size with many disks
B. select a stripe size that is the same or an even multiple of the I/O size
C. use small segment size in conjunction with RAID 0
D. select a segment size that minimizes the occurrences of a single I/O on multiple drives
Answer: B

IBM   000-744認定資格   000-744参考書

NO.4 You arrive at a customer site to implement the DS4000 solution and find that the customer wants to use
RAID 1+0 instead of RAID 5 for everything. What is a possible concern in this situation?
A. capacity
B. random IO performance
C. throughput performance
D. disk rebuild times
Answer: A

IBM過去問   000-744認定資格   000-744   000-744

NO.5 In the Major Event Log (MEL), what does immediate Availability Initialization (IAF) completed on
logical drive" indicate?
A. The drive has been internally reformatted.
B. The drive has just become accessible by the host.
C. LUN has just been replaced.
D. Hot sparing has occurred.
Answer: A

IBM過去問   000-744認定証   000-744認定証

NO.6 What is one disadvantage of managing a storage subsystem through the Fibre Channel IO path?
A. The fibre cable used for data IO cannot be used for management commands.
B. An access logical drive is required to communicate with the controllers.
C. Management commands cannot be encapsulated by the Fibre Channel protocol.
D. Ethernet cables to the controllers are also required to send management commands.
Answer: B

IBM認証試験   000-744   000-744   000-744   000-744

NO.7 What does a flashing green LED on a drive indicate?
A. status ok
B. drive active
C. failed drive
D. hot spare in use
Answer: B

IBM参考書   000-744認定証   000-744練習問題   000-744認定資格   000-744

NO.8 Three hosts are redundantly connected to a DS4000 system. Two are running a non-clustered
Windows 2003 Server and the other is running Red Hat Linux. How many Storage Partitions are used in
this configuration?
A. 0
B. 1
C. 3
D. 8
Answer: C

IBM   000-744練習問題   000-744   000-744認定試験   000-744

NO.9 Which statement about DS4000 firmware upgrades is true?
A. The controller firmware and NVSRAM files are closely tied to each other and must be installed in the
proper combination.
B. Controller firmware and NVSRAM upgrades always require the ESM firmware to be upgraded at the
same time.
C. Only one controller must be accessible via the Ethernet or fiber in order to perform a controller
firmware upgrade.
D. The controller firmware and NVSRAM are independent from each other and can be upgraded at
different times.
Answer: A

IBM認定試験   000-744認証試験   000-744認定証

NO.10 What is the minimum number of HDDs required for RAID 6?
A. 1
B. 2
C. 3
D. 4
Answer: D

IBM問題集   000-744   000-744認証試験   000-744認定証

NO.11 When creating a FlashCopy of a logical drive, a repository logical drive is created. The repository
logical drive is for metadata and copy-on-write data when a change is made to the FlashCopy source
logical drive. By default, what is its size?
A. 10% of the source volume
B. 20% of the source volume
C. 50% of the source volume
D. 100% of the source volume
Answer: B

IBM練習問題   000-744   000-744認定試験   000-744

NO.12 What best describes a drive in eplaced status?
A. a drive that has replaced a failed drive and needs to be revived in order to complete the data recovery
process
B. a temporary status for a drive that has replaced a failed drive, but has not yet been reconstructed
C. a hot spare that has spared out for a failed drive in an array causing the hot spare to become the active
drive in the array
D. the final state of a drive that has replaced a failed drive and has been reconstructed
Answer: B

IBM   000-744認定証   000-744認定資格   000-744認定証

NO.13 In addition to the storage administrator's e-mail address, what information do you need to set up
e-mail alerts to be sent to the storage administrator?
A. sender's SMTP server address, the sender's e-mail address
B. sender's POP server address, the sender's e-mail address
C. storage administrator's POP server address, the sender's e-mail address
D. storage administrator's SMTP server address, the sender's e-mail address
Answer: A

IBM   000-744   000-744練習問題   000-744

NO.14 A customer is combining two separate IT operations in one central location. They are using a DS4800.
Performance has been marginal. You look at the DS4800 Performance Monitor and observe that they are
well within the DS4800 performance specifications. Which tool can be used to determine the cause of the
problem?
A. Capacity Magic
B. Bandwidth Estimator
C. IOMeter
D. Disk Magic
Answer: D

IBM   000-744参考書   000-744   000-744   000-744

NO.15 When performing an array migration, what is NOT required?
A. verification that there is no logical drive name duplication between the source and target systems
B. removal of mappings for all logical drives within the array being migrated
C. documenting the stripe order of the drives in the array for proper placement on the target subsystem
D. Advanced Maintenance Place Array Offline
Answer: C

IBM   000-744   000-744   000-744

NO.16 In the exhibit, which management method is being used?
A. in-band
B. rlogin
C. client-host-band
D. out-of-band
Answer: D

IBM   000-744問題集   000-744問題集   000-744練習問題   000-744練習問題

NO.17 To generate a premium feature key that can be installed on a DS4000 subsystem, you must provide
certain information to IBM. This information includes the IBM machine type/model and what additional
information?
A. serial number, activation code, feature enable identifier and e-mail address
B. serial number, activation code, and e-mail address
C. activation code, e-mail address, controller firmware level
D. serial number, and e-mail address, drive firmware level
Answer: A

IBM   000-744   000-744参考書   000-744認定証   000-744過去問

NO.18 Which statement is FALSE regarding hot spare drives in the DS4000 subsystem?
A. The storage server will attempt to find a spare in the same enclosure as the failed drive first.
B. The storage server will give preference to a spare the same size as the failed drive.
C. The storage server will use a spare with at least the same capacity as the failed drive.
D. The controller may use a spare that is larger than the failed drive and block the remaining capacity
from use.
Answer: B

IBM認定試験   000-744   000-744   000-744

NO.19 A customer wants to use SATA drives to reduce costs. Which application matches SATA use?
A. TSM
B. Exchange
C. application with low IOPS
D. write once, read many times
Answer: C

IBM   000-744過去問   000-744問題集   000-744

NO.20 When examining a profile you see the following:
Drive at Enclosure 5, Slot 8 [mirrored pair with drive at enclosure 5, slot 9]
Drive at Enclosure 5, Slot 9 [mirrored pair with drive at enclosure 5, slot 8]
How should this be configured for enclosure loss protection?
A. Drive at Enclosure 5, Slot 9 [mirrored pair with drive at enclosure 5, slot 9]
Drive at Enclosure 5, Slot 9 [mirrored pair with drive at enclosure 5, slot 9]
B. Drive at Enclosure 3, Slot 1 [mirrored pair with drive at enclosure 5, slot 9]
Drive at Enclosure 5, Slot 9 [mirrored pair with drive at enclosure 3, slot 1]
C. Drive at Enclosure 5, Slot 17 [mirrored pair with drive at enclosure 5, slot 9]
Drive at Enclosure 5, Slot 9 [mirrored pair with drive at enclosure 5, slot 17]
D. Drive at Enclosure 5, Slot 9 [mirrored pair with drive at enclosure 15, slot 19]
Drive at Enclosure 15, Slot 19 [mirrored pair with drive at enclosure 5, slot 9]
Answer: B

IBM参考書   000-744   000-744認定資格   000-744

JapanCertは最新のHP0-J62問題集と高品質のHP0-J66問題と回答を提供します。JapanCertの00M-654 VCEテストエンジンとHP2-N43試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質のST0-202 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100%保証します。試験に合格して認証資格を取るのはそのような簡単なことです。

記事のリンク:http://www.japancert.com/000-744.html

没有评论:

发表评论