PD0-001認定試験に合格することは難しいようですね。試験を申し込みたいあなたは、いまどうやって試験に準備すべきなのかで悩んでいますか。そうだったら、下記のものを読んでください。いまPD0-001試験に合格するショートカットを教えてあげますから。あなたを試験に一発合格させる素晴らしいPD0-001試験に関連する参考書が登場しますよ。それはJapanCertのPD0-001問題集です。気楽に試験に合格したければ、はやく試しに来てください。
JapanCertは受験者に向かって試験について問題を解決する受験資源を提供するサービスのサイトで、さまざまな受験生によって別のトレーニングコースを提供いたします。受験者はJapanCertを通って順調に試験に合格する人がとても多くなのでJapanCertがIT業界の中で高い名声を得ました。
IT認証試験に合格したい受験生の皆さんはきっと試験の準備をするために大変悩んでいるでしょう。しかし準備しなければならないのですから、落ち着かない心理になりました。しかし、JapanCertのCompTIAのPD0-001トレーニング資料を利用してから、その落ち着かない心はなくなった人がたくさんいます。JapanCertのCompTIAのPD0-001トレーニング資料を持っていたら、自信を持つようになります。試験に合格しない心配する必要がないですから、気楽に試験を受けることができます。これは心のヘルプだけではなく、試験に合格することで、明るい明日を持つこともできるようになります。
全てのIT職員はCompTIAのPD0-001試験をよく知っています。これは一般的に認められている最高級の認証で、あなたのキャリアにヘルプを与えられます。あなたはその認証を持っているのですか。CompTIAのPD0-001試験は非常に難しい試験ですが、JapanCertのCompTIAのPD0-001試験トレーニング資料を手に入れたら大丈夫です。試験が難しいと感じるのは良い方法を選択しないからです。JapanCertを選んだら、成功の手を握ることがきるようになります。
試験番号：PD0-001問題集
試験科目：CompTIA 「CompTIA PDI+ Beta Exam」
最近更新時間：2013-10-19
問題と解答：861
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.japancert.com/PD0-001.html
NO.1 Which of the following is a reason black toner is used in color printers?
A.It decreases the print speed in color laser printers.
B.It prevents moir patterns when printing color photographs.
C.It reduces the cost per page when printing gray scale documents.
D.It makes the color toner resistant to smudging when wet.
Answer: C
CompTIA PD0-001過去問 PD0-001過去問 PD0-001認証試験
NO.2 Which of the following types of media would MOST likely cause above normal amounts of machine
jamming?
A.Envelopes
B.Colored media
C.Letterhead
D.Pre punched
Answer: A
CompTIA練習問題 PD0-001問題集 PD0-001認定証
NO.3 A technician is troubleshooting a network connectivity issue on a MFD and would like to eliminate the
possibility of another device on the network having the same IP address. The technician should:
A.disconnect the MFD and ping the IP address.
B.disconnect the MFD and ping the subnet mask.
C.disconnect the MFD and ping the loopback address.
D.run the ipconfig command from the command prompt.
Answer: A
CompTIA認証試験 PD0-001問題集 PD0-001練習問題 PD0-001
NO.4 A customer has installed a new computer on their network. They can print to the printer but the option
for duplex printing is not available. All other computers have the option. Which of the following is the
cause of the problem?
A.The new computer is printing to the wrong IP address.
B.The new computer is using the wrong protocol.
C.The driver port is not setup correctly.
D.The option has not been selected on the driver.
Answer: D
CompTIA参考書 PD0-001認定証 PD0-001認定資格 PD0-001 PD0-001参考書
NO.5 When onsite repairing a printer the technicians cell phone rings and it is a personal call, how should
the technician handle this?
A.Answer the call and talk to your friend at the customer site.
B.Answer the call and tell the friend you will call them later.
C.Let it go to voicemail, call them back between service calls.
D.Let it ring and call the friend back when the customer leaves.
Answer: C
CompTIA PD0-001 PD0-001 PD0-001認証試験 PD0-001
NO.6 Which of the following is the purpose of a torque limiter in a roller?
A.To reduce wear and tear on rollers.
B.To provide resistance but still allow some slippage.
C.To limit the amount of movement by media.
D.To make it easier to replace rollers.
Answer: B
CompTIA認定資格 PD0-001 PD0-001 PD0-001認定資格 PD0-001 PD0-001
NO.7 Which of the following items can be used as a discharge lamp?
A.Halogen lamp
B.Light Emitting Diodes (LED)
C.Fuser lamp
D.Cleaning roller
Answer: B
CompTIA練習問題 PD0-001認証試験 PD0-001 PD0-001 PD0-001
NO.8 How many CCDs are located in a single pass duplex ADF?
A.One
B.2
C.3
D.4
Answer: B
CompTIA参考書 PD0-001 PD0-001認定資格
NO.9 Which of the following would be the BEST process for the technician to follow when beginning to
diagnose a unit at a customers site?
A.Check the printers error log, and then inform the primary user what the issue is.
B.Go directly to the printer and investigate any issues that are found.
C.Investigate the printers status, then ask the primary user to write down what they think is wrong.
D.Gather information from the primary user, and then evaluate the printers condition.
Answer: D
CompTIA認証試験 PD0-001 PD0-001認定資格 PD0-001認定資格 PD0-001 PD0-001練習問題
NO.10 An encoder sensor typically detects:
A.paper position.
B.shaft rotation.
C.magnetic flux.
D.laser beam strength.
Answer: B
CompTIA問題集 PD0-001 PD0-001 PD0-001認定試験 PD0-001認定証 PD0-001
NO.11 Which of the following stages in the laser print process attracts toner to the latent image on the
photoconductor?
A.Writing
B.Fusing
C.Development
D.Transfer
Answer: C
CompTIA PD0-001 PD0-001 PD0-001
NO.12 In which of the following sections of an MFP would a technician find a Xenon Lamp?
A.The paper feed section
B.The fuser section
C.The scanner section
D.The transfer section
Answer: C
CompTIA PD0-001認証試験 PD0-001参考書 PD0-001 PD0-001
NO.13 A customer is concerned about excessive media jamming in their device. Which of the following is the
FIRST thing a technician should check?
A.Media feed rollers
B.Cassette drawers
C.Fusing section
D.Device log data
Answer: D
CompTIA PD0-001認定試験 PD0-001問題集 PD0-001過去問
NO.14 Which of the following is the FIRST step a technician should take when troubleshooting a device
issue?
A.Gather information from the customer.
B.Isolate the problem on the device.
C.Read the service documentation for possible causes.
D.Check the parts life counters.
Answer: A
CompTIA認証試験 PD0-001 PD0-001過去問
NO.15 Which of the following type of lamp is used for heating a fuser?
A.Xenon
B.Halogen
C.Incandescent
D.Light Emitting Diode
Answer: B
CompTIA PD0-001認定試験 PD0-001問題集 PD0-001問題集
NO.16 When arriving at the customers location, two different users describe the problem, and from their
description it seems to be two separate problems. Which of the following is an appropriate step to take?
A.Ignore both of them and decide what the real problem is.
B.Set up a separate call for each problem.
C.Have them duplicate the problem at the device.
D.Ask a third person and see if the problem is the same thing.
Answer: C
CompTIA練習問題 PD0-001 PD0-001 PD0-001練習問題
NO.17 Which of the following components is part of the ink dispersion system?
A.Print Heads
B.Cleaning heads
C.Pickup Roller
D.Charge Assembly
Answer: A
CompTIA過去問 PD0-001認定資格 PD0-001
NO.18 Using the CMYK color model, the color purple is produced by combining cyan and which other color?
A.Green
B.Magenta
C.Yellow
D.Black
Answer: B
CompTIA認定試験 PD0-001 PD0-001 PD0-001
NO.19 Which of the following devices can route electrical signals only when activated by an external control
signal?
A.Solenoid
B.Relay
C.Clutch
D.Capacitor
Answer: B
CompTIA PD0-001 PD0-001認定資格
NO.20 The customer has a dedicated ink jet fax machine that is used to send and receive faxes only from the
corporate office. The user complains of streaks on the received faxes while the internal self-prints are fine.
Which of the following should a technician recommend?
A.Clean the scanner glass on the distant machine.
B.Clean the scanner glass on the local machine.
C.Clean the printer head on the local machine.
D.Call the telephone company to increase the line signal level.
Answer: A
CompTIA認証試験 PD0-001問題集 PD0-001 PD0-001 PD0-001問題集
NO.21 A polygon mirror is part of which of the following assemblies?
A.Laser unit
B.Developer unit
C.Charge assembly
D.Fuser assembly
Answer: A
CompTIA認定証 PD0-001 PD0-001
NO.22 Which of the following failed components would be responsible for the fuser unit not heating properly?
A.Halogen lamps
B.Ball bearing
C.Hot roller
D.Pressure roller
Answer: A
CompTIA PD0-001練習問題 PD0-001 PD0-001 PD0-001認定証
NO.23 When is it advisable to dump the waste toner from a technicians service vacuum?
A.When it is full.
B.It is not recommended.
C.Before performing preventative maintenance.
D.After each call.
Answer: B
CompTIA認定証 PD0-001認定資格 PD0-001認証試験
NO.24 How should a service representative provide closure at the end of a call for a client?
A.Explain the issues of the call, the steps taken to resolve them and query the client if they have any
additional needs.
B.Explain the solution to the issue and then provide the client with the technicians contact information in
case they have any questions.
C.Give the client a technical explanation on the issue and how it was fixed; throw any faulty equipment in
the clients garbage.
D.Proceed to the next service call, check back with the client in a week to see if they have any additional
needs.
Answer: A
CompTIA認証試験 PD0-001 PD0-001 PD0-001 PD0-001
NO.25 Which of the following functions is associated with the developer unit?
A.Supplies toner to the photoconductor
B.Charges the surface of the photoconductor
C.Writes the latent image on the photoconductor
D.Cleans the photoconductor
Answer: A
CompTIA PD0-001認定資格 PD0-001 PD0-001
NO.26 The polygon mirror is located in which of the following components?
A.Developer unit
B.Scanner unit
C.Fuser unit
D.Laser unit
Answer: D
CompTIA PD0-001認定試験 PD0-001
NO.27 The proper safety guidelines for handling any device specific consumables can be found in which of
the following documentation?
A.Material Safety Data Sheets
B.Installation Guides
C.Consumer Reports
D.Devices Parts Catalog
Answer: A
CompTIA PD0-001 PD0-001 PD0-001練習問題
NO.28 Which of the following utilities could be used to determine a subnet mask?
A.PING
B.NSLOOKUP
C.TRACERT
D.IPCONFIG
Answer: D
CompTIA参考書 PD0-001 PD0-001過去問 PD0-001認定試験 PD0-001 PD0-001
NO.29 Scheduled preventative maintenance visits should be carried out:
A.after two unplanned service calls.
B.according to manufacturers specifications.
C.when the device is becoming unreliable.
D.every sixty days.
Answer: B
CompTIA練習問題 PD0-001 PD0-001 PD0-001認定証
NO.30 During the photoconductor preparation step, residual charge can be removed by which of the
following? (Select TWO).
A.Pressure
B.Oil
C.Light
D.Gravity
E.Electrical Charge
Answer: CE
CompTIA認証試験 PD0-001練習問題 PD0-001 PD0-001 PD0-001認定資格
JapanCertは最新の00M-617問題集と高品質のJN0-533問題と回答を提供します。JapanCertの000-273 VCEテストエンジンとMB6-870試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質の70-684 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。
没有评论:
发表评论