話と行動の距離はどのぐらいありますか。これは人の心によることです。意志が強い人にとって、行動は目と鼻の先にあるのです。あなたはきっとこのような人でしょう。IBMの000-240認定試験に申し込んだ以上、試験に合格しなければならないです。これもあなたの意志が強いことを表示する方法です。JapanCertが提供したトレーニング資料はインターネットで最高のものです。IBMの000-240認定試験に合格したいのなら、JapanCertのIBMの000-240試験トレーニング資料を利用してください。
あなたのキャリアでいくつかの輝かしい業績を行うことを望まないのですか。きっとそれを望んでいるでしょう。では、常に自分自身をアップグレードする必要があります。では、IT業種で仕事しているあなたはどうやって自分のレベルを高めるべきですか。実は、000-240認定試験を受験して認証資格を取るのは一つの良い方法です。IBMの認定試験の000-240資格は非常に大切なものですから、IBMの試験を受ける人もますます多くなっています。
いつもあなたに最高の000-240認定試験に関連する試験参考書を与えられるために、JapanCertは常に問題集の質を改善し、ずっと最新の試験のシラバスに応じて問題集を更新しています。現在の市場では、JapanCertはあなたの最もよい選択です。長い間にわたって、JapanCertは多くの受験生に認可されました。私を信じていないなら、周りの人々に聞いてみてもいいです。JapanCertの試験問題集を利用したことがある人がきっといますから。JapanCertは最優秀な試験000-240参考書を提供してあなたを試験に合格させることを保証します。
JapanCertはたくさんIT関連認定試験の受験者に利便性を提供して、多くの人がJapanCertの問題集を使うので試験に合格しますた。彼らはJapanCertの問題集が有効なこと確認しました。JapanCertが提供しておりますのは専門家チームの研究した問題と真題で弊社の高い名誉はたぶり信頼をうけられます。安心で弊社の商品を使うために無料なサンブルをダウンロードしてください。
試験番号：000-240問題集
試験科目：IBM 「IBM Sterling Configurator V9.1, Deployment」
最近更新時間：2013-10-28
問題と解答：112
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.japancert.com/000-240.html
NO.1 Review the following Model:
The callouts (i.e. "R1", "R2", "R3, R4" and "R5") denote the rules assigned at the different levels. For the
rules assigned to the same node, assume that the rules are listed in the increasing order of priority value.
What is the sequence in which the rules will be evaluated?
A. R1, R2, R3, R4, R5
B. R1, R2, R4, R3, R5
C. R1, R2, R5, R4, R3
D. R3, R4, R2, R5, R1
Answer: D
IBM参考書 000-240認定試験 000-240 000-240 000-240 000-240認定試験
NO.2 A modeler wants to give a discount on the price of cars, but only if the following conditions are
satisfied:
The modeler creates a rule for this and it is set to trigger on success. How will this rule condition be
defined in the Visual Modeler?
B
A. Exhibit A
B. Exhibit B
C. Exhibit C
D. Exhibit D
Answer: C
IBM問題集 000-240 000-240 000-240認証試験
NO.3 A major bike manufacturer sells customizable bikes online, and includes assembly and shipping. For a
bike to be completed, the user must select a frame, tires and gear systems. There are several choices
available for the user in each category, but there are some compatibility issues between certain types of
frames and the third-party gear systems that the manufacturer uses. For example, there are three sizes
the bike frames: 19" 20" and 22". There are three models of gear systems that the manufacturer offers:
6.speed, 18-speed and 24-speed. While 6-speed and 18speed fits all the frame sizes, 24-speed is a
premium exclusive model and fits only the 22". The requirement calls for compatibility to be pointed out to
the user. What is the correct way to model this product?
A. Use a rule to automatically fix compatibility issues.
B. Use a Constraint Table to manage the allowable configurations.
C. Use a list to list down the different options available for each frame.
D. Define different properties for gear system 24-speed to distinguish it from 6-speed and 18speed.
Answer: B
IBM 000-240認定証 000-240練習問題 000-240参考書
NO.4 A modeler has to create a rule with many fragments. In which order should the fragments be set up for
better performance?
A. The nested fragments should come first.
B. The least probable fragment should come first.
C. The sequence of the fragments do not make any difference.
D. The fragments that use custom function handlers should come first.
Answer: B
IBM 000-240 000-240認証試験 000-240認定資格
NO.5 A company wants to give its customers a 10% volume discount for its Professional Services if the order
totals 100 or more hours. The $250 hourly (undiscounted) base rate for Professional Services is retained
in an Option Item under an Option Class called base rates in the model and is never displayed in the UI.
Rules will be used to set the UI: PRICE for the Professional Services Option Item displayed in the UI
based on the quantity of hours ordered and the UI: PRICE of the hidden base rate Option Item.
Review the following images which show what is presented to the user in the UI with and without a
discount.
When creating these assignment rules, which function needs to be used to retrieve the hourly base rate
for Professional Services?
A. sum
B. value
C. lookup
D. propval
Answer: D
IBM問題集 000-240認定証 000-240 000-240
NO.6 A Model has property values that change frequently, and these changes are communicated by an
external vendor. The modeler needs to make these changes as required. What is the MOST efficient way
of updating the Model with these frequent changes?
A. Make the changes in the database table.
B. Make the changes using the Visual Modeler.
C. Export the current Model and make changes in the Model XML. Import the changed Model.
D. Create a common Worksheet and maintain it externally in a Comma Separated Value (CSV) file.
Upload it with the new property values.
Answer: D
IBM 000-240 000-240過去問 000-240参考書 000-240認定資格
NO.7 A modeler needs to create a property to represent the quantity of televisions in a home where the value
needs to be used in a calculation. What type of property should be created?
A. List property
B. String property
C. Integer property
D. Number property
Answer: D
IBM 000-240過去問 000-240問題集 000-240参考書
NO.8 A modeler is about to create an Option Class for logos for a Model of t-shirts. The modeler discovers
that there is a Model for logos and that it has been used as a sub-model in a Model for bags. Instead of
attaching the Model for logos as a sub-model to the Option Class, the modeler wants to copy the
reference for the sub-model from the Model for bags. What are the possible advantages of doing this?
A. Any properties attached to the sub-model reference are copied over and may be useful.
B. Any rules and properties attached to the sub-model reference are copied over and may be useful.
C. There is no advantage. It is same as attaching the Model for logos as a sub-model to the Option Class.
D. It is not possible to copy the sub-model reference.
Answer: B
IBM認定試験 000-240認定試験 000-240過去問
NO.9 A Model is developed per the following image:
To ensure consistency and control of priorities, which of the following statements is TRUE?
A. "Property, D" will always be equal to 5.
B. The formula cannot be attached to property as depicted in the image.
C. To ensure that the value of "Property, D" is 7 after Model execution, change the priority of formula firing
so that the formula for deriving "Property, C" is fired before the formula for "Property, D".
D. To ensure that the value of "Property, C" is calculated before the value of "Property, D", replace the
formula with two rules. Rule1 calculates "Property, C" and Rule2 calculates "Property, D". Set the priority
for Rule1 is set to 40, and the priority of Rule2 to 50.
Answer: D
IBM認定証 000-240 000-240 000-240認証試験
NO.10 To represent an entertainment collection, a modeler creates a Model Group with Models for books,
songs, movies. etc. Option Classes in each Model represent different genres and the Option Items are the
individual works of art (specific songs, movies, books, etc.). Given that the term "'artists" is applicable to
songs and movies but not to books, where should a property denoting "artists" be defined and attached?
A. Property is defined at the Model Group and attached at the Models.
B. Property is defined at the Models and attached at the Option Class.
C. Property is defined at the Model Group and attached at the Option Items.
D. Property is defined at the Option Class and attached at the Option Items.
Answer: C
IBM 000-240認定証 000-240 000-240
NO.11 A furniture company has a Model for a house with an option to select different types of furniture
commonly found in a house (e.g. tables, chairs etc). Each of those furniture types are modeled as Option
Classes and the available options are defined as Option Items. The prices are defined as a property on
Option Items. Multiple selections can be made in each of the furniture types and quantities can be entered
for them. Which function(s) will be needed in a rule attached at the Option Class level to determine the
average price of each of the furniture type selected?
A. sum()
B. childSum()
C. sum(), count()
D. childSum(), count()
Answer: B
IBM認定試験 000-240 000-240 000-240
NO.12 A modeler is working on a rule to determine if the customer's location is one of the 10 possible locations
where a discounted offer can be given. What type of property SHOULD be used for storing all 10 of the
locations in one property.?
A. List property
B. String property
C. Location property
D. String Array property
Answer: A
IBM認証試験 000-240過去問 000-240 000-240参考書
NO.13 A modeler creates a Model for a desktop with multiple layers of Option Classes. To keep the price of the
desktop low, the modeler decided on a maximum price for each group of components and marked it at the
appropriate Option Class level with the property "maxPrice". The rules for validating that the price does
not go beyond the max set for that component or subcomponent is defined at Model and attached at the
Option Items. What function can be used in the rule to determine the "maxPrice" for each component?
A. max()
B. value()
C. parent()
D. propval()
Answer: C
IBM 000-240過去問 000-240 000-240
NO.14 A car manufacturer wants to display a list of available cars based on what the customer chooses for the:
What should be the rule fragment/condition written for this?
A. value(AvailableCars) not in list(CarType) [Fragment is false]
B. value(AvailableCars) not in propval(CarType) [Fragment is false]
C. propval(AvailableCars) not in list(CarType) [Fragment is false]
D. propval(AvailableCars) not in parent(CarType) [Fragment is false]
Answer: C
IBM 000-240認定試験 000-240 000-240 000-240
NO.15 When naming properties, a modeler avoids using names that start with an "_" (underscore). The
modeler is correct to do this, because names that start with an "_" (underscore) are which type of
properties?
A. UI Properties
B. UEV Properties
C. System Properties
D. Rule Trace Properties
Answer: C
IBM 000-240 000-240
JapanCertは最新のE20-018問題集と高品質のHP2-N40問題と回答を提供します。JapanCertのNS0-155 VCEテストエンジンと000-652試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質の1Z0-027 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。
没有评论:
发表评论