JapanCertが提供した研修ツールはMicrosoftの070-545-VBの認定試験に向けて学習資料やシミュレーション訓練宿題で、重要なのは試験に近い練習問題と解答を提供いたします。JapanCert を選ばれば短時間にITの知識を身につけることができて、高い点数をとられます。
JapanCertはIT試験問題集を提供するウエブダイトで、ここによく分かります。最もよくて最新で資料を提供いたします。こうして、君は安心で試験の準備を行ってください。弊社の資料を使って、１００％に合格を保証いたします。もし合格しないと、われは全額で返金いたします。
進歩を勇敢に追及する人生こそ素晴らしい人生です。未来のある日、椅子で休むとき、自分の人生を思い出したときに笑顔が出たら成功な人生になります。あなたは成功な人生がほしいですか。そうしたいのなら、速くJapanCertのMicrosoftの070-545-VB試験トレーニング資料を利用してください。これはIT認証試験を受ける皆さんのために特別に研究されたもので、１００パーセントの合格率を保証できますから、躊躇わずに購入しましょう。
試験番号：070-545-VB問題集
試験科目：Microsoft 「TS:Microsoft Visio 2007, Application Development」
最近更新時間：2013-10-21
問題と解答：54
IT業界の一员として、君はまだIT認証試験を悩んでいますか？認証試験はITの専門知識を主なテストとして別に初めてIT関連の認証試験に参加する受験生にとってはとても難しいとみされます。良い対応性の訓練が必要で、JapanCert の問題集をお勧めます。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.japancert.com/070-545-VB.html
NO.1 You need to develop an Office Visio 2007 solution for 1,000 computers that run Visio 2007. The solution
must meet the following requirements:
The solution must not require the installation of additional components, tools, or DLLs.
Users must be able to customize the solution without installing additional development tools.
What should you develop?
A. A template and a Visio Solutions Library (VSL)
B. A custom stencil that uses ShapeSheet programming
C. A Windows Forms application that contains the Visio Drawing Control
D. A solution by using Microsoft Visual Studio 2005 Tools for Office Second Edition
Answer: B
Microsoft 070-545-VB過去問 070-545-VB
NO.2 You are developing an Office Visio 2007 Shared Add-in. You create an object named objShape that
references a new shape. You need to modify the add-in to identify the shape if the shape is moved to a
different page. Which property of objShape should you reference?
A. ID
B. Name
C. NameID
D. UniqueID(visGetOrMakeGUID)
Answer: D
Microsoft 070-545-VB 070-545-VB 070-545-VB認定試験
NO.3 You have a Windows Forms application that contains an embedded Visio Drawing Control. You have
an Office Visio 2007 drawing saved as C:\Template.vsd. You need to configure the application to load
and display the drawing as a template by using the Visio Drawing Control. Which code should you add
to the application?
A. Me.axDrawingControl1. Document. Application.Documents.Open( " C:\Template.VSD " )
B. Me.axDrawingControl1.Window.Application.Documents.Open( " C:\Template.VSD " )
C. Me.axDrawingControl1.Src = " C:\Template.VSD "
D. Dim openDockedFlag As Short = CShort(Visio.VisOpenSaveArgs.visOpenDocked)
Me.axDrawingControl1.Window.Application.Documents. OpenEx("C:\Template.VSD",openDockedFlag)
Answer: C
Microsoft問題集 070-545-VB認定資格 070-545-VB 070-545-VB
NO.4 You plan to create an Office Visio 2007 application. You need to prevent Visio 2007 from failing in the
event that there is a fault in the application. What are three possible ways to achieve this goal? (Each
correct answer presents a complete solution. Choose three.)
A. Create a VBA solution.
B. Create a VSL solution.
C. Create an EXE add-on solution.
D. Create a Shared Add-in solution, and then use the COM Shim Wizard to create a DLL.
E. Create a Shared Add-in solution by using Microsoft Visual Studio 2005 Tools for Office Second Edition.
Answer: CDE
Microsoft認証試験 070-545-VB 070-545-VB問題集 070-545-VB参考書
NO.5 You are developing an Office Visio 2007 Shared Add-in. You need to prevent shape deletions by
using custom logic. What should you do?
A. Configure the add-in to listen to the QueryCancelPageDelete event of the Visio 2007 application.
B. Configure the add-in to listen to the QueryCancelSelectionDelete event of the Visio 2007 application.
C. Configure the add-in to listen to the BeforeShapeDelete event of the Visio 2007 application.
D. Configure the add-in to listen to the BeforeSelectionDelete event of the Visio 2007 application.
Answer: B
Microsoft問題集 070-545-VB参考書 070-545-VB認定証 070-545-VB問題集 070-545-VB過去問
NO.6 You are developing an Office Visio 2007 Shared Add-in. You need to modify the add-in to perform an
action after the Visio 2007 application flushes its events queue. What should you do?
A. Listen for AppDeactivated.
B. Listen for RunModeEntered.
C. Listen for MustFlushScopeBeginning.
D. Queue a MarkerEvent and then listen for a MarkerEvent.
Answer: D
Microsoft 070-545-VB 070-545-VB 070-545-VB
NO.7 You are developing an Office Visio 2007 Shared Add-in.
You construct an event sink class that listens to events from the Visio 2007 Application, Document, Page,
and Shape objects. The VisEventProc function has the following signature:
Public Function VisEventProc(
ByVal eventCode As Short,
ByVal source As Object,
ByVal eventId As Integer,
ByVal eventSequenceNumber As Integer,
ByVal subject As Object,
ByVal moreInformation As Object) As Object
You need to construct a switch to identify the object that raised the event.
Which parameter should you use?
A. eventCode
B. moreInformation
C. source
D. subject
Answer: C
Microsoft 070-545-VB過去問 070-545-VB 070-545-VB 070-545-VB認定資格
NO.8 You are developing an Office Visio 2007 Shared Add-in. You create three objects named objMaster,
objPage, and objWindow. The object objMaster references a local copy of the master. The object objPage
references the current page. The object objWindow references the active window. You need to create
several shape instances of the master on the current page at specific coordinates in the active window.
Which method should you use?
A. objPage.Drop()
B. objPage.DropMany()
C. objWindow.CreateSelection()
D. objMaster.Shapes.Item(1).Copy() objPage.Paste()
Answer: B
Microsoft 070-545-VB練習問題 070-545-VB認定資格 070-545-VB
NO.9 You create a custom template and several custom stencils. You need the stencils to open
automatically when a new file is created from the template. What should you do?
A. Deploy the stencils to the My Shapes folder.
B. Deploy the stencils to the same folder as the template.
C. Dock the stencils in the template workspace, and then save the template.
D. Modify the Office Visio 2007 application settings to contain the path to the stencils.
Answer: C
Microsoft 070-545-VB 070-545-VB
NO.10 You are creating an application that will be used to connect two two-dimensional (2-D) shapes by
using a Dynamic Connector shape. In your application, you create an object named myVisioApp that
references the Visio Application object. You need to add code to your application to connect the 2-D
shapes. What code should you add?
A. myVisioApp.Active P age.Shapes(1). Cells(PinX). GlueTo( myVisioApp.Active P
age.Shapes(2) .Cells(PinX) )
B. myVisioApp.Active P age. Shapes(1).Cells(BeginX).GlueTo
myVisioApp.ActivePage.Shapes(2).Cells(Connections.X1)
C. myVisioApp.Active P age.Shapes(1).AutoConnect( myVisioApp.Active P age.Shapes(2),
visAutoConnectDirNone)
D. myVisioApp.Active P age.Shapes(1).AutoConnect( myVisioApp.Active P age.Shapes( 1 ) ,
visAutoConnectDirRight )
Answer: C
Microsoft 070-545-VB 070-545-VB
JapanCertは最新のLOT-404問題集と高品質の00M-503問題と回答を提供します。JapanCertのICYB VCEテストエンジンと646-206試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質の200-120 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。
没有评论:
发表评论