君が後悔しないようにもっと少ないお金を使って大きな良い成果を取得するためにJapanCertを選択してください。JapanCertはまた一年間に無料なサービスを更新いたします。
いまMicrosoftの070-680認定試験に関連する優れた資料を探すのに苦悩しているのですか。もうこれ以上悩む必要がないですよ。ここにはあなたが最も欲しいものがありますから。受験生の皆さんの要望に答えるように、JapanCertは070-680認定試験を受験する人々のために特に効率のあがる勉強法を開発しました。受験生の皆さんはほとんど仕事しながら試験の準備をしているのですから、大変でしょう。試験に準備するときにはあまり多くの時間を無駄にすることを避けるように、JapanCertは短時間の勉強をするだけで試験に合格することができる070-680問題集が用意されています。この問題集には実際の試験に出る可能性のあるすべての問題が含まれています。従って、この問題集を真面目に学ぶ限り、070-680認定試験に合格するのは難しいことではありません。
070-680認定試験の準備をするために、JapanCert の専門家たちは彼らの豊富な知識と実践を生かして特別なトレーニング資料を研究しました。JapanCert のMicrosoftの070-680問題集はあなたが楽に試験に受かることを助けます。JapanCert のMicrosoftの070-680練習テストは070-680試験問題と解答、 070-680 問題集、070-680 書籍や070-680勉強ガイドに含まれています。
試験番号：070-680問題集
試験科目：Microsoft 「TS:Windows 7,Configuring」
最近更新時間：2013-10-29
問題と解答：513
070-680認定試験はIT業界の新たなターニングポイントの一つです。試験に受かったら、あなたはIT業界のエリートになることができます。情報技術の進歩と普及につれて、Microsoftの070-680問題集と解答を提供するオンライン·リソースが何百現れています。その中で、JapanCertが他のサイトをずっと先んじてとても人気があるのは、JapanCertのMicrosoftの070-680試験トレーニング資料が本当に人々に恩恵をもたらすことができて、速く自分の夢を実現することにヘルプを差し上げられますから。
21世紀の情報化時代の急流の到来につれて、人々はこの時代に適応できるようにいつも自分の知識を増加していてますが、まだずっと足りないです。IT業種について言えば、Microsoftの070-680認定試験はIT業種で欠くことができない認証ですから、この試験に合格するのはとても必要です。この試験が難しいですから、試験に合格すれば国際的に認証され、受け入れられることができます。そうすると、美しい未来と高給をもらう仕事を持てるようになります。JapanCertというサイトは世界で最も信頼できるIT認証トレーニング資料を持っていますから、JapanCertを利用したらあなたがずっと期待している夢を実現することができるようになります。１００パーセントの合格率を保証しますから、Microsoftの070-680認定試験を受ける受験生のあなたはまだ何を待っているのですか。速くJapanCertというサイトをクリックしてください。
あなたの夢は何ですか。あなたのキャリアでいくつかの輝かしい業績を行うことを望まないのですか。きっと望んでいるでしょう。では、常に自分自身をアップグレードする必要があります。IT業種で仕事しているあなたは、夢を達成するためにどんな方法を利用するつもりですか。実際には、IT認定試験を受験して認証資格を取るのは一つの良い方法です。最近、Microsoftの070-680試験は非常に人気のある認定試験です。あなたもこの試験の認定資格を取得したいのですか。さて、はやく試験を申し込みましょう。JapanCertはあなたを助けることができますから、心配する必要がないですよ。
JapanCertは認定で優秀なIT資料のウエブサイトで、ここでMicrosoft 070-680認定試験の先輩の経験と暦年の試験の材料を見つけることができるとともに部分の最新の試験の題目と詳しい回答を無料にダウンロードこともできますよ。弊社のIT技術専門家たち は質が高い問題集と答えを提供し、お客様が合格できるように努めています。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.japancert.com/070-680.html
NO.1 You have a computer that runs Windows 7. The computer has a single volume. You install 15
applications and customize the environment.
You complete the following actions:
* Create an export by using Windows Easy Transfer.
* Create a system image by using Backup and Restore.
* Install the User State Migration Tool (USMT) and run Scanstate. The disk on the computer fails.
* You replace the disk.
* You need to restore the environment to the previous state.
What should you do?
A. Install Windows 7, install USMT, and then run Loadstate.
B. Install Windows 7 and then import the Windows Easy Transfer package.
C. Start the computer from a Windows Recovery Environment (Windows RE) disk and then run
Bcdboot.exe.
D. Start the computer from a Windows Recovery Environment (Windows RE) disk and then restore the
system image.
Answer: D
Microsoft 070-680認証試験 070-680
NO.2 You are evaluating the purchase a netbook computer that has the following hardware:
*1.6-gigahertz (GHz)
*32-bit processor
*1024-MB RAM
*1 video card that uses shared memory
*4-GB solid state drive.
You need to ensure that you can install Windows 7 Enterprise on the netbook computer.
Which hardware component should you change?
A. hard disk
B. processor
C. RAM
D. video card
Answer: A
Microsoft認証試験 070-680 070-680練習問題 070-680
NO.3 You perform a clean installation of Windows 7 on a computer. You need to ensure that you can run
Windows XP Mode in Windows 7. What should you do?
A. Enable hardware-assisted virtualization.
B. Create a Data Execution Prevention (DEP) exception.
C. Install Windows XP in the same partition as Windows 7.
D. Install Windows XP in a different partition than Windows 7.
Answer: A
Microsoft 070-680 070-680認証試験 070-680 070-680認証試験
NO.4 A user reports that he is unable to start his computer. He provides the following information:
* The boot partition is encrypted by using BitLocker Drive Encryption (BitLocker).
* The user cannot locate his BitLocker recovery key.
* You need to start Windows 7 on the computer.
The solution must use the minimum amount of administrative effort. What should you do?
A. From the BIOS, disable the Trusted Platform Module (TPM).
B. Start the computer from the Windows 7 installation media and select Install now.
C. Start the computer from the Windows 7 installation media and select Repair your computer.
D. Start the computer from the Windows 7 installation media, press SHIFT+F10, and then run CHKDSK.
Answer: B
Microsoft 070-680 070-680 070-680認定資格 070-680
NO.5 You have a computer that has the following hardware configuration:
* 1.6-gigahertz (GHz) processor (64-bit).
* 8-GB RAM.
* 500-GB hard disk.
* Graphics card that has 128-MB RAM.
You need to select an edition of Window 7 to meet the following requirements:
* Support DirectAccess
* Support Windows XP Mode
* Use all of the installed memory
* Support joining an Active Directory domain
Which edition should you choose?
A. Windows 7 Enterprise (64-bit)
B. Windows 7 Enterprise (x86)
C. Windows 7 Professional (64-bit)
D. Windows 7 Ultimate (x86)
Answer: A
Microsoft 070-680 070-680認定資格 070-680
NO.6 You need to back up your Encrypting File System (EFS) certificate. You must achieve this goal in the
minimum amount of time. What should you do?
A. Run Cipher.exe /x.
B. Run Ntbackup.exe /p.
C. From Backup and Restore, click Back up now.
D. From Backup and Restore, click Create a system image.
Answer: A
Microsoft 070-680 070-680
NO.7 You have a computer that runs Windows Vista. You install Windows 7 on a new partition on the
computer. You need to ensure that the computer always starts Windows Vista by default. What should you
do?
A. Run Bcdedit.exe and specify the /default parameter.
B. Run Bcdedit.exe and specify the /bootems parameter.
C. Create a boot.ini file in the root of the Windows 7 partition.
D. Create a boot.ini file in the root of the Windows Vista partition.
Answer: A
Microsoft 070-680 070-680問題集
NO.8 You have a computer that runs Windows 7. You add a new hard disk drive to the computer and create a
new NTFS partition. You need to ensure that you can use the Previous Versions feature on the new drive.
What should you do?
A. From Disk Management, convert the new disk to a dynamic disk.
B. From System Properties, configure the System Protection settings.
C. From System and Security, enable BitLocker Drive Encryption (BitLocker).
D. From the properties of the new drive, create a share and modify the caching settings.
Answer: B
Microsoft 070-680 070-680認定資格
NO.9 You have a computer that runs Windows 7. The computer has System Protection enabled. You need to
retain only the last System Protection snapshot of the computer. All other snapshots must be deleted.
What should you do?
A. Run Disk Cleanup for Programs and Features.
B. Run Disk Cleanup for System Restore and Shadow Copies.
C. From the System Protection Restore settings, select Turn off System Restore.
D. From the System Protection Restore settings, select Only restore previous versions of files.
Answer: B
Microsoft 070-680認定資格 070-680 070-680認定試験
NO.10 You have a computer that contains a DVD drive and a single 350-GB hard disk drive. You attempt to
install Windows 7 on the computer by using the DVD installation media and receive the following error
message: Reboot and Select proper Boot device or Insert Boot Media in selected Boot device. You need
to ensure that you can install Windows 7 on the computer by using the DVD installation media. What
should you do?
A. From the BIOS, modify the startup order.
B. From the BIOS, enable Pre-Boot Execution Environment (PXE).
C. Create an answer file named oobe.xml and place the file on the hard disk drive.
D. Create an answer file named autounattend.xml and place the file on the hard disk drive.
Answer: A
Microsoft問題集 070-680 070-680 070-680認定資格 070-680参考書 070-680練習問題
NO.11 You plan to install Windows 7 on a computer that contains a single hard disk drive. The hard disk drive
is connected to a RAID controller. During the installation, you discover that the Windows 7 installation
media does not include the files required to install the RAID controller. You need ensure that you can
install Windows 7 on the hard disk drive. What should you do?
A. Insert the Windows installation media and press F8 during the computer's power-on self test (POST).
B. Insert the Windows installation media and press F6 during the computer's power-on self test (POST).
C. Start the computer from the Windows installation media. From the Install Windows dialog box, click
Load Driver.
D. Start the computer from the Windows installation media. From the Install Windows dialog box, click
Drive options (advanced).
Answer: C
Microsoft 070-680認証試験 070-680認証試験 070-680認定試験
NO.12 You have a computer that runs Windows XP. The computer has one basic disk that contains a single
partition. The partition has 30 GB of free space. The hard disk has 5 GB of unallocated space. You need
to install Windows 7 in a dual-boot configuration. Windows 7 must not be installed in a virtual hard disk
(VHD). What should you do first?
A. Create a second partition.
B. Shrink the primary partition.
C. Convert the hard disk to a GPT disk.
D. Convert the hard disk to a dynamic disk.
Answer: B
Microsoft 070-680参考書 070-680
NO.13 You have a computer that runs Windows 7 Professional. A USB disk is attached to the computer. You
need to ensure that you can enable BitLocker To Go on the USB disk. What should you do?
A. Enable Encrypting File System (EFS).
B. Upgrade the computer to Windows 7 Enterprise.
C. Initialize the Trusted Platform Module (TPM) hardware.
D. Obtain a client certificate from an enterprise certification authority (CA).
Answer: B
Microsoft認証試験 070-680 070-680 070-680問題集
NO.14 You have a computer that is certified for Windows 7. You need to install Windows 7 on the computer.
The installation method must prevent you from being prompted for information during the installation.
What should you do?
A. Create an unattend.txt file on a removable drive. Start the computer from the Windows 7 installation
media.
B. Create an autounattend.xml file on a removable drive. Start the computer from the Windows 7
installation media.
C. Start the computer from the Windows 7 installation media. At the command prompt, run Setup.exe and
specify the /m parameter.
D. Start the computer from the Windows 7 installation media. At the command prompt, run Setup.exe and
specify the /tempdrive parameter.
Answer: B
Microsoft 070-680 070-680参考書 070-680認定試験 070-680認定証
NO.15 You have a computer that runs Windows Vista (x86). You need to perform a clean installation of
Windows 7 (64-bit). What should you do?
A. From the Windows 7 installation media, run Rollback.exe.
B. From the Windows 7 installation media, run Migsetup.exe.
C. Start the computer from the Windows 7 installation media. From the Install Windows dialog box, select
the Upgrade option.
D. Start the computer from the Windows 7 installation media. From the Install Windows dialog box, select
the Custom (advanced) option.
Answer: D
Microsoft練習問題 070-680 070-680練習問題 070-680認証試験 070-680問題集 070-680認定資格
NO.16 You have a computer that runs Windows Vista Service Pack 2 (SP2). You need to upgrade the
computer to Windows 7. What should you do?
A. Start the computer from the Windows 7 installation media and select the Upgrade option.
B. Start the computer from the Windows 7 installation media and select the Custom (advanced) option.
C. From Windows Vista, run Setup.exe from the Windows 7 installation media and select the Upgrade
option.
D. From Windows Vista, run Setup.exe from the Windows 7 installation media and select the Custom
(advanced) option.
Answer: C
Microsoft問題集 070-680認定試験 070-680問題集 070-680 070-680
NO.17 You need to reduce the amount of space currently being used to store system restore points. What
should you do?
A. Run Disk Cleanup.
B. Run Msconfig.exe.
C. Configure disk quotas.
D. Configure Windows Backup.
Answer: A
Microsoft過去問 070-680練習問題 070-680
NO.18 You have a computer that runs Windows 7. You manually create a system restore point. You need to
restore a copy of a file stored on drive C from two days ago. You must achieve this goal in the minimum
amount of time. What should you do?
A. From Recovery, select System Restore.
B. From Backup and Restore, select Restore my files.
C. From the command prompt, run Wbadmin get items.
D. From the properties of the file, select Previous Versions.
Answer: D
Microsoft 070-680参考書 070-680認定資格 070-680認証試験 070-680
NO.19 You have a computer that runs Windows 7. You need to identify how much disk space is occupied by
previous versions. What should you do?
A. At a command prompt, run Diskpart.
B. At a command prompt, run Vaultcmd.
C. From System, view the System Protection settings.
D. From the properties of drive C, view the previous versions settings.
Answer: C
Microsoft練習問題 070-680過去問 070-680
NO.20 You have a computer that runs Windows 7. You have a system image of the computer. You need to
restore a single file from the system image. You must achieve this goal in the minimum amount of time.
What should you do first?
A. From Disk Management, select Attach VHD.
B. From Backup and Restore, select Restore my files.
C. Restart the computer and run System Restore.
D. Restart the computer and run System Image Recovery.
Answer: A
Microsoft 070-680問題集 070-680認証試験 070-680
JapanCertは最新のE20-554問題集と高品質の1Z0-466問題と回答を提供します。JapanCertの1Z0-807 VCEテストエンジンと312-50v8試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質の000-781 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。
没有评论:
发表评论