あなたのキャリアでいま挑戦に直面していますか。自分のスキルを向上させ、よりよく他の人に自分の能力を証明したいですか。昇進する機会を得たいですか。そうすると、はやくHP2-K01認定試験を申し込んで認証資格を取りましょう。HPの認定試験はIT領域における非常に大切な試験です。HPのHP2-K01認証資格を取得すると、あなたは大きなヘルプを得ることができます。では、どのようにはやく試験に合格するかを知りたいですか。JapanCertのHP2-K01参考資料はあなたの目標を達成するのに役立ちます。
今は時間がそんなに重要な社会でもっとも少ないお時間を使って試験に合格するのは一番よいだと思います。JapanCertが短期な訓練を提供し、一回に君の試験に合格させることができます。
JapanCertは多種なIT認証試験を受ける方を正確な資料を提供者でございます。弊社の無料なサンプルを遠慮なくダウンロードしてください。
試験番号：HP2-K01問題集
試験科目：HP 「Servicing HP BladeSystem」
最近更新時間：2014-04-14
問題と解答：126
このインターネットが普及された時代に、どのような情報を得るのが非常に簡単なことだということを我々はよく知っていますが、品質と適用性の欠如が問題です。インターネットでHPのHP2-K01試験トレーニング資料を探す人がたくさんいますが、どれが信頼できるか良く分からないです。ここで私はJapanCertのHPのHP2-K01試験トレーニング資料を勧めたいです。この資料はインターネットでのクリック率と好評率が一番高いです。JapanCertはHPのHP2-K01試験トレーニング資料の一部の問題と解答を無料に提供しますから、あなたは試用してから買うかどうかを決めることができます。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.japancert.com/HP2-K01.html
NO.1 Which task of the HP Troubleshooting Methodology do you accomplish when performing Step 2?
A. Determine which subsystem could cause the problem.
B. Identify the steps necessary to implement each solution.
C. Identify the possible solution for each possible root cause.
D. Determine and use the most appropriate tools for each situation.
Answer: A
HP認証試験 HP2-K01過去問 HP2-K01 HP2-K01
NO.2 Your customer requires software that will help keep HP software and drivers installed on c-Class
blade servers up-to-date. They want a low-cost solution.
What should you recommend to this customer? (Select two)
A. HP Client Manager
B. HP Virtualization Software
C. Version Control Agent (VCA)
D. Version Control Repository Manager (VCRM)
E. Vulnerability and Patch Management Pack (VPM)
Answer: C,D
HP認定資格 HP2-K01認証試験 HP2-K01
NO.3 Which ProLiant Essentials Foundation Pack CD can run the Array Diagnostic Utility (ADU)?
A. Diagnostic CD
B. SmartStart CD
C. Management CD
D. Firmware Maintenance CD
Answer: B
HP過去問 HP2-K01 HP2-K01 HP2-K01問題集 HP2-K01
NO.4 What happens if a server blade is moved from an enclosure managed by Virtual Connect to an
enclosure that is not managed by Virtual Connect?
A. MAC address and WWNs must be changed manually for the server blade.
B. Local MAC addresses are automatically returned to the original factory defaults.
C. After boot, server blades will gain access to the network as soon as the server and interconnect
modules are ready.
D. The configuration of the server blade is automatically updated before it is allowed to power on
and connect to the network.
Answer: B
HP問題集 HP2-K01過去問 HP2-K01 HP2-K01
NO.5 Which HP StorageWorks arrays can be used with the HP BladeSystem c-Class? (Select two.)
A. MSA 20
B. MSA 30
C. MSA 500
D. MSA 1000
E. MSA 1500cs
Answer: D,E
HP問題集 HP2-K01過去問 HP2-K01認証試験
NO.6 You are performing maintenance at a customer's site and they are booting an HP BladeSystem p-
Class server from a storage area network (SAN). You must configure the server with a virtual boot
device that enables the server to fetch boot-loading instructions from the SAN.
How is the virtual boot device presented to the host server?
A. as a Logical Unit Number (LUN) on the disk array
B. as a Pre-boot Execution Environment (PXE) NIC
C. as aFibre channel Host Bus Adapter (HBA) on the target server
D. as a Deployment Server database attached to the target server
Answer: A
HP認証試験 HP2-K01認定資格 HP2-K01認定証 HP2-K01
NO.7 You installed new server blades into an HP BladeSystem c-Class enclosure.
How does the enclosure indicate if a server blade is not installed correctly?
A. The HPBladeSystem Insight Display will flash blue.
B. The interconnect will display errors when you configure it.
C. The Onboard Administrator will not allow the interconnect to power on.
D. The Onboard Administrator will not allow the incorrectly placed server blade to power on.
Answer: D
HP参考書 HP2-K01認定試験 HP2-K01認定証 HP2-K01参考書 HP2-K01
NO.8 Which online tool can be utilized to plan the power requirements for an HP Integrity BL860c
Blade?
A. HP Part Surfer
B. HP Knowledge Base
C. HPBladeSystem Sizer
D. HP Power Analysis & Planner
Answer: C
HP認定試験 HP2-K01 HP2-K01認定資格 HP2-K01練習問題
NO.9 You need to update Integrated Lights-Outs (iLO) card firmware, but you do not have physical
access to the server.
How can you accomplish this task?
A. useiLO web interface
B. use System Software Manager
C. use Version Control Repository Manager (VCRM)
D. use Instant Support Enterprise Edition (ISEE) software
Answer: A
HP過去問 HP2-K01 HP2-K01 HP2-K01 HP2-K01練習問題
NO.10 You are installing a new InifiniBand Mezzanine card into a customer's BL480c server blade. The
mezzanine card is installed into mezzanine slot 2.
Which interconnect location must the InifiniBand controller be installed into?
A. bays 3-4
B. bays 5-6
C. bays 7-8
D. Placement of the controller does not matter. The Onboard Administrator will properly map
theInifiniband mezzanine card to the installed Infiniband Interconnect.
Answer: B
HP認定試験 HP2-K01問題集 HP2-K01 HP2-K01認定試験 HP2-K01認定試験
NO.11 Your customer wants a solution that allows them to remotely deploy operating systems without
having to interact directly with each server blade or hiring additional IT staff.
Which product should they install to accomplish this goal?
A. HP Version Control Agent
B. HP Rapid Deployment Pack
C. HP Remote Deployment Utility
D. HP Vulnerability and Patch Management
E. HP Version Control Repository Manager
Answer: B
HP認定試験 HP2-K01認定試験 HP2-K01過去問
NO.12 A customer reports that an InfiniBand switch does not power on. What is a possible cause of this
problem?
A. Dynamic Power Saver is not activated on theInfiniBand switch.
B. A three-phase power system should be used withInfiniBand switches.
C. At least one server blade is not equipped with Host Channel Adapter (HCA) card.
D. The Onboard Administrator version firmware does not supportInfiniBand switches.
Answer: D
HP HP2-K01問題集 HP2-K01練習問題 HP2-K01
NO.13 Which management functionality is provided by the Onboard Administrator? (Select two.)
A. manages shared power and cooling for the enclosure
B. provides management Ethernet fabric for the enclosure
C. provides HP SIM (System Insight Manager) functionality for Blade servers
D. activates Remote Deployment Pack (RDP) when an in-service server fails
E. automates the process of deploying server operating systems and software
Answer: A,B
HP認証試験 HP2-K01 HP2-K01 HP2-K01認定資格 HP2-K01
NO.14 Which HP remote application continuously monitors hardware and sends an alert to HP when an
error occurs?
A. HP Systems Insight Manager
B. Open Service Event Manager
C. Instant SupportEnterprise Edition
D. Integrated Management Log Viewer
Answer: C
HP認定試験 HP2-K01参考書 HP2-K01
NO.15 You added an interconnect switch in an HP BladeSystem c-Class and the switch does not power
up. What should you check? (Select three.)
A. interconnect type and location
B. position of the mezzanine cards
C. position of the power supplies in the enclosure
D. status of the first full-height server blade in the enclosure
E. enclosure and switch status in the Onboard Administrator
F. whether interconnect bay has been activated for the bay the switch is in
Answer: A,B,E
HP認証試験 HP2-K01参考書 HP2-K01 HP2-K01認定資格 HP2-K01
NO.16 If you suspect the hard drive or hard drive subsystem may be at fault in a system, which HP tools
can isolate the source of the problem? (Select two.)
A. Onboard Administrator
B. Array Diagnostics Utility (ADU)
C. ROM-Based Setup Utility (RBSU)
D. Insight Diagnostics Online Edition
E. Option ROM Configuration for Arrays (ORCA)
Answer: B,D
HP過去問 HP2-K01 HP2-K01過去問 HP2-K01
NO.17 Which processor types are offered on the BL460c? (Select two)
A. AMDOpteron Processor
B. Dual-Core Intel EM64T processor
C. Intel Itanium 2 Madison processor
D. Intel Itanium 2 Montecito processor
E. Quad-Core Intel EM64T processor
Answer: B,E
HP HP2-K01問題集 HP2-K01認定証
NO.18 How many BL30p servers can be supported by a fully populated 1U p-Class power enclosure?
A. 4
B. 8
C. 12
D. 16
Answer: D
HP HP2-K01 HP2-K01認定試験 HP2-K01
NO.19 You work with an enclosure equipped with ten fans and sixteen half-height servers. Two fans
failed.
In which slots must you insert the remaining fans to keep all sixteen servers working?
A. 1, 2, 3, 4, 6, 7, 8, 9
B. 2, 3, 4, 5, 7, 8, 9, 10
C. 1, 2, 4, 5, 6, 7, 9, 10
D. 1, 2, 3, 4, 7, 8, 9, 10
Answer: C
HP HP2-K01 HP2-K01 HP2-K01 HP2-K01 HP2-K01
NO.20 A customer wants to install five full-height blade servers into a c-Class enclosure that is running
N+N power supply redundancy mode.
How many power supplies are required to support this configuration?
A. 3
B. 4
C. 5
D. 6
Answer: D
HP認定試験 HP2-K01練習問題 HP2-K01 HP2-K01 HP2-K01認定試験
NO.21 In which situation are qualified rack options covered by the HP BladeSystem c-Class Care Pack
services?
A. when the options are installed in the same rack
B. when the rack is fully populated with p-Class blades
C. when the options are used only with blade equipment
D. when the options are purchased with the c7000 enclosure
Answer: A
HP過去問 HP2-K01 HP2-K01認定資格 HP2-K01
NO.22 Your customer has eight BL20p G3 servers all with Fibre Channel mezzanine cards. They also
have a GbE2 switch installed with a Brocade switch attached.
None of their servers can access external shared storage (MSA1500cs). What should you verify
first?
A. if the BL20p G3 has a 4Gb or fasterFibre Channel card
B. if the Brocade switch has an IP address assigned by DHCP
C. ifFibre Channel pass through is installed on the GbE2 switches
D. if Selective Storage Presentation (SSP) is enabled on the MSA1500cs
Answer: C
HP問題集 HP2-K01 HP2-K01認定資格 HP2-K01
NO.23 Some servers within a customer data center turn off because of overheating. You have an air
conditioning specification and want to compare this information with the amount of heat generated
by the servers.
Which HP tool provides this information?
A. Product Bulletin
B. Power Calculator
C. Data Center Sizer
D. Performance Quick Reference Tool (PQRT)
Answer: B
HP認証試験 HP2-K01 HP2-K01 HP2-K01参考書
NO.24 Which HP cooling technology uses power management to control CPU power state automatically
based on application demand?
A. Active Cool fans
B. Dynamic Power Saver
C. Modular Cooling System
D. ProLiant Power Regulator
Answer: D
HP認定証 HP2-K01 HP2-K01練習問題 HP2-K01認定資格 HP2-K01認証試験
NO.25 Which GUI utility diagnoses system bottlenecks and is easily integrated with HP Systems Insight
Manager?
A. HP Control Tower for HPBladeSystem
B. HPProLiant Essentials Workload Management Pack
C. HPProLiant Essentials Performance Management Pack
D. HPProLiant Essentials Vulnerability and Patch Management Pack
Answer: C
HP問題集 HP2-K01認証試験 HP2-K01練習問題 HP2-K01 HP2-K01過去問
NO.26 Which item is required to power on and troubleshoot a single p-Class blade server that has been
removed from its enclosure?
A. Diagnostic Station and adapter
B. Server Blade Management Module
C. Integrated Lights-Out remote console
D. You cannot power on and troubleshoot a p-Class blade that has been removed from its
enclosure
Answer: A
HP問題集 HP2-K01認定試験 HP2-K01認定資格 HP2-K01 HP2-K01参考書 HP2-K01認定資格
NO.27 What is the maximum number of DIMMs that can be installed into an HP Integrity BL860c Server
Blade?
A. 6
B. 8
C. 10
D. 12
E. 16
Answer: D
HP参考書 HP2-K01 HP2-K01 HP2-K01認定試験
NO.28 During which portion of the HP Troubleshooting Methodology do you carefully observe and record
the results of each step including any error messages or changes in functionality?
A. Step 1 - Collect data
B. Step 3 - Develop the action plan
C. Step 4 - Execute the action plan
D. Step 6 - Implement preventative measures
Answer: C
HP HP2-K01認証試験 HP2-K01練習問題 HP2-K01
NO.29 Which c-Class BL series server blade supports 4 internal SAS drives?
A. BL460c
B. BL480c
C. BL685c
D. BL860c
Answer: B
HP練習問題 HP2-K01 HP2-K01
NO.30 Which utility allows you to easily install and provision one or many blade servers in an unattended,
automated fashion?
A. Virtual Install Disk
B. Rapid Deployment Pack (RDP)
C. ROM-Based Setup Utility (RBSU)
D. HP Systems Insight Manager (HP SIM)
Answer: B
HP過去問 HP2-K01 HP2-K01過去問 HP2-K01 HP2-K01 HP2-K01
JapanCertは最新のE20-018問題集と高品質のC4040-123問題と回答を提供します。JapanCertの70-467 VCEテストエンジンとC4040-122試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質のHP0-Y46 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。
没有评论:
发表评论