IT業界の中でたくさんの野心的な専門家がいって、IT業界の中でより一層頂上まで一歩更に近く立ちたくてIBMのC2010-573試験に参加して認可を得たくて、IBM のC2010-573試験が難度の高いので合格率も比較的低いです。JapanCertの商品は試験問題を広くカーバして、認証試験の受験生が便利を提供し、しかも正確率100%です。そして、試験を安心に参加してください。
IBMのC2010-573認定試験はIT業界の中でとても普遍的な試験になります。試験の準備は時間とエネルギーがかかります。時は金なり社会に時間を無駄しないようによいツルを探し出されるのはみんなの希望です。JapanCertのIBMのC2010-573認証試験の問題集は君の20時間だけかかりますよ。
試験番号：C2010-573問題集
試験科目：IBM 「IBM Tivoli Netcool/Impact V6.1 Implementation」
最近更新時間：2014-04-08
問題と解答：123
JapanCertはIT認定試験に関連する資料の専門の提供者として、受験生の皆さんに最も優秀な試験C2010-573参考書を提供することを目標としています。他のサイトと比較して、JapanCertは皆さんにもっと信頼されています。なぜでしょうか。それはJapanCertは長年の経験を持っていて、ずっとIT認定試験の研究に取り組んでいて、試験についての多くの規則を総括しましたから。そうすると、JapanCertのC2010-573教材は高い的中率を持つことができます。これはまた試験の合格率を保証します。従って、JapanCertは皆の信頼を得ました。
試験の準備をするためにJapanCertのIBMのC2010-573試験トレーニング資料を買うのは冒険的行為と思ったとしたら、あなたの人生の全てが冒険なことになります。一番遠いところへ行った人はリスクを背負うことを恐れない人です。また、JapanCertのIBMのC2010-573試験トレーニング資料が信頼できるのは多くの受験生に証明されたものです。JapanCertのIBMのC2010-573試験トレーニング資料を利用したらきっと成功できますから、JapanCertを選ばない理由はないです。
アンケート調査によると、IT業種の皆さんが現在最も受験したい認定試験はIBMのC2010-573試験だそうです。確かに、この試験はとても大切な試験で、公的に認可されたものです。しかも、この認定資格があなたが高い技能を身につけていることも証明できます。しかしながら、試験の大切さと同じ、この試験も非常に難しいです。試験に合格するのは少し大変ですが、心配しないでくださいよ。JapanCertはあなたに難しいC2010-573認定試験に合格することを助けてあげますから。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.japancert.com/C2010-573.html
NO.1 Given only command line access, where is it verified that a newly started IBM Tivoli
Netcool/lmpact
Server instance is registering itself as a slave or primary in a cluster?
A. in the server.log file
B. in the netcool.log file
C. in the systemOut.log file
D. using the nci_server utility
Answer: B
IBM認証試験 C2010-573 C2010-573認定証 C2010-573 C2010-573
NO.2 In which folder are the IBM Tivoli Netcool/lmpact V6.1 service logs stored?
A. $NCHOME/logs
B. $IMPACT_HOME/log
C. $IMPACT_HOME/Iogs
D. $IMPACT_HOME/services/logs
Answer: C
IBM問題集 C2010-573認定証 C2010-573過去問
NO.3 Which component of IBM WebSphere is installed with IBM Tivoli Netcool/lmpact V6.1?
A. WebSphere MQ
B. WebSphere Portal Server
C. WebSphere Process Server
D. Embedded WebSphere Application Server
Answer: D
IBM C2010-573認証試験 C2010-573認定証 C2010-573
NO.4 What must occur before a data type can be defined?
A. Data Type service must be started
B. Policy Activator service is activated
C. Data Source definition is configured
D. ObjectServer Event Reader is activated
Answer: C
IBM練習問題 C2010-573 C2010-573練習問題 C2010-573 C2010-573
NO.5 In order for IBM Tivoli Netcool/lmpact V6.1 to start using the ObjectServer for
authentication, the server
must be configured so that it can map the roles that the application exposes to groups and/or
users
managed in IBM Tivoli Netcool/OMNIbus. Which file must be edited for this purpose?
A. omnibus.conf
B. omnibususers
C. guiserver.setting
D. objectserver.conf
Answer: C
IBM C2010-573 C2010-573参考書 C2010-573
NO.6 Which functional step should be completed when designing an IBM Tivoli
Netcool/lmpact V6.1
solution?
A. write an enrichment policy
B. develop Netcool/lmpact startup scripts
C. test high availability and fail-over scenarios
D. determine methods of achieving customer requirements
Answer: D
IBM C2010-573 C2010-573問題集 C2010-573認証試験 C2010-573認定資格
NO.7 Which utility edits the installed GUI server deployment and maps the roles to the
specified users?
A. roles.[bat|sh]
B. user-roles.[bat|sh]
C. update-impact-roles.[bat|sh]
D. impact-security-roles.[bat|sh]
Answer: C
IBM C2010-573 C2010-573参考書 C2010-573
NO.8 Which step is required to design an IBM Tivoli Netcool/lmpact V6.1 solution from
stakeholder
requirements?
A. Determine if the correct Java version is installed.
B. Create an architecture and a raw functional design of policies.
C. Determine if enough disk space is provided on the installation servers.
D. Interview the operational staff to determine their most efficient way to resolve a problem
Answer: B
IBM C2010-573 C2010-573問題集 C2010-573
NO.9 What is the purpose of a project in IBM Tivoli Netcool/lmpact V6.1?
A. It allows for creating subsets of the elements stored in the global repository.
B. It allows for creating subsets of the elements stored in the Impact repository.
C. It allows for creating subsets of the elements stored across cluster members.
D. It allows for creating supersets of the elements stored in the global repository.
Answer: A
IBM C2010-573 C2010-573問題集 C2010-573 C2010-573
NO.10 What must be done to receive an IBM Tivoli Netcool/OMNIbus event when a policy run
raises any
unknown exception?
A. use the action function exceptionnameOand add policy code to insert the event between
the brackets
B. use handle exceptionnameO in the policy and add policy code to insert the event between
the brackets
C. create an ExceptionHandlerPolicy that inserts the event and define this in the Policytogger
configuration
D. configure the Self-Monitoring service to log exceptions into the ObjectServer defined in the
service
configuration
Answer: C
IBM C2010-573 C2010-573過去問 C2010-573参考書
NO.11 What is the minimum memory requirement for installing a Tivoli Integrated Portal profile
and an IBM
Tivoli Netcool/lrnpact profile running on the same physical machine?
A. 2 GB
B. 4 GB
C. 6 GB
D. 8 GB
Answer: C
IBM C2010-573 C2010-573問題集
NO.12 What is true about the LDAP DSA?
A. It does not support data saved in UTF-8 format.
B. It does not retrieve information from LDAPV2/V3.
C. It allows IBM Tivoli Netcool/lmpactto add, modify, or delete information managed by the
LDAP server.
D. It does not allow IBM Tivoli Netcool/lmpactto add. modify, or delete information managed
by the LDAP
server.
Answer: D
IBM認定証 C2010-573参考書 C2010-573参考書
NO.13 How is the name of the IBM Tivoli N etc oo I/Imp act Server Instance on the console
identified?
A. check the IBM Installer utility litslll.sh to show the Impact Server Instance Names that have
been set up
B. check the TIPProfile/logs/server1 directory - the SystemOutlog holds the Impact Service
Instance
name
C. use the nci_server command line utility to show the Impact Server Instance Names that
have been set
up
D. check the impact/etc directory - all Impact Server Instance-related files use the Instance
Name in the
beginning of every file name
Answer: D
IBM C2010-573 C2010-573
NO.14 A new Impact Server will be installed using the console mode of the installer
application. Which
statement is true?
A. All default ports must be available.
B. The installer will not check if the required ports are available.
C. A starting point of ports can be selected if the default ports are not available.
D. The installer will adapt the required ports if some are tested as in use during the
installation.
Answer: C
IBM C2010-573認定試験 C2010-573 C2010-573参考書 C2010-573 C2010-573
NO.15 Which three IBM Tivoli Netcool/lmpact roles in Tivoli Integrated Portal can be used to
control users
access to navigation pages in the GUI and to permit users to unlock their own files?
A. impactSuperUser. impactFullAccessUser, and impactOpViewUser
B. impactAdminUser, impactReadWriteUser, and impactOpViewUser
C. impactAdminUser, impactFullAccessUser, and impactOpViewUser
D. impactAdminUser, impactFullAccessUser, and impactReadOnlyUser
Answer: C
IBM過去問 C2010-573 C2010-573練習問題 C2010-573 C2010-573過去問 C2010-573認定試験
NO.16 What are two ways Data Source Adapters are used in IBM Tivoli Netcool/lmpact
V6.1? (Choose two.)
A. to monitor Netcool/lmpact services
B. to communicate with external data sources
C. to extend the capabilities of Netcool/lmpact
D. to apply product fixes to the Netcool/lmpact Server
E. to start the policy logging service in Netcool/lmpact
Answer: B,C
IBM C2010-573練習問題 C2010-573練習問題 C2010-573練習問題 C2010-573練習問題
NO.17 An IBM Tivoli Netcool/lmpact V6.1 system is configured to perform event enrichment
by retrieving
ObjectServer events which have an empty Location field. Which Service Log can be used to
verify that
Netcool/lmpact is selecting events from the ObjectServer based upon that condition?
A. the PolicyLogger service
B. the PolicyActivator service
C. the OMNIbusEventReader service
D. the OMNIbusEventListener service
Answer: C
IBM過去問 C2010-573 C2010-573
NO.18 Which tool will start a policy from the command line?
A. nci_crypt
B. nci_policy
C. nci_trigger
D. nci_import
Answer: C
IBM参考書 C2010-573 C2010-573過去問 C2010-573認定証 C2010-573過去問
NO.19 Which command line function should be executed prior to applying a product fix or
upgrading the IBM
Tivoli Netcool/lmpact Server as best practice.?
A. nci_crypt
B. nci_policy
C. nci_trigger
D. nci_export
Answer: D
IBM C2010-573 C2010-573認定試験 C2010-573認定資格
NO.20 On a server with only command line access, the server in an IBM Tivoli
Netcool/lmpact cluster is
identified as acting as a primary server by using which command line utility?
A. nci_server
B. nci_trigger
C. nci_get_primary
D. nci_findendpoint
Answer: C
IBM問題集 C2010-573参考書 C2010-573
JapanCertは最新のHP0-J61問題集と高品質のBAS-013問題と回答を提供します。JapanCertの642-242 VCEテストエンジンと000-820試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質のNS0-155 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。
没有评论:
发表评论