HitachiのHH0-210の試験問題集

JapanCertのウェブサイトをクリックしたら、JapanCertに登録した人々が非常にたくさんいることに驚いたでしょう。実はこれは普通なことです。JapanCertは毎日異なる受験生に様々なトレーニング資料を提供します。彼らは当社の資料を利用してから試験に受かりました。これは当社が提供したHitachiのHH0-210トレーニング資料が本当に効果的なものということを証明しました。もしあなたも試験に合格したいのなら、JapanCertをミスしないでください。JapanCertはきっとあなたのニーズを満たせますから。

JapanCertのHitachiのHH0-210試験トレーニング資料は受験生が模擬試験場で勉強させます。受験生は問題を選べ、テストの時間もコントロールできます。JapanCertというサイトで、あなたはストレスと不安なく試験の準備をすることができますから、一般的な間違いを避けられます。そうしたら、あなたは自信を得ることができて、実際の試験で経験を活かして気楽に合格します。

JapanCertはHitachiのHH0-210試験に関する完全な資料を唯一のサービスを提供するサイトでございます。JapanCertが提供した問題集を利用してHitachiのHH0-210試験は全然問題にならなくて、高い点数で合格できます。Hitachi HH0-210試験の合格のために、JapanCertを選択してください。

JapanCert を選択して１００％の合格率を確保することができて、もし試験に失敗したら、JapanCertが全額で返金いたします。

HitachiのHH0-210の認定試験に合格すれば、就職機会が多くなります。この試験に合格すれば君の専門知識がとても強いを証明し得ます。HitachiのHH0-210の認定試験は君の実力を考察するテストでございます。

JapanCert HitachiのHH0-210試験トレーニング資料というのは一体なんでしょうか。HitachiのHH0-210試験トレーニングソースを提供するサイトがたくさんありますが、JapanCertは最実用な資料を提供します。JapanCertには専門的なエリート団体があります。認証専門家や技術者及び全面的な言語天才がずっと最新のHitachiのHH0-210試験を研究していますから、HitachiのHH0-210認定試験に受かりたかったら、JapanCertのサイトをクッリクしてください。あなたに成功に近づいて、夢の楽園に一歩一歩進めさせられます。

JapanCertはHitachiのHH0-210認定試験に対して問題集を提供しておるサイトで、現場のHitachiのHH0-210試験問題と模擬試験問題集を含みます。ほかのホームページに弊社みたいな問題集を見れば、あとでみ続けて、弊社の商品を盗作することとよくわかります。ass4Testが提供した資料は最も全面的で、しかも更新の最も速いです。

試験番号：HH0-210問題集

試験科目：Hitachi 「HDS Certified Implmenter-Enterprise」

問題と解答：全120問

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.japancert.com/HH0-210.html

NO.1 Which two topology settings should be used when connecting a Hitachi Universal Storage Platform V
to a SAN switch? (Choose two.)
A.Public Loop
B.Private Loop
C.Point-to-Point
D.Fabric
ANSWER: CD

Hitachi   HH0-210   HH0-210   HH0-210   HH0-210参考書   HH0-210

NO.2 Which two activities can be performed without interrupting user access to data in a Hitachi Enterprise
storage system? (Choose two.)
A.Upgrade Cache Memory from 32GB to 64GB.
B.Run the CUDG4 (Control Unit DiaGnosis) test.
C.Change the DKC system emulation type.
D.Change a 2Gbps Fibre Channel feature to a 4Gbps Fibre Channel feature.
ANSWER: AD

Hitachi   HH0-210練習問題   HH0-210

NO.3 You need to enable Copy-on-Write SnapShot software on a Hitachi Universal Storage Platform VM.
Which two are required? (Choose two.)
A.remote replication license
B.ShadowImage license
C.additional cache memory
D.additional shared memory
ANSWER: BD

Hitachi   HH0-210認定資格   HH0-210   HH0-210

NO.4 You are enabling the Syslog transfer in Storage Navigator to send the Syslog output to the primary
Syslog server.
Which two additional settings must be made to allow the transfer? (Choose two.)
A.the primary server subnet settings
B.the IP address of the primary server
C.the Syslog file format
D.the port number for the primary server
ANSWER: BD

Hitachi   HH0-210   HH0-210参考書   HH0-210過去問

NO.5 Which three microcode exchange procedure modes are available in a Hitachi Enterprise storage
system? (Choose three.)
A.Alternate SCSI path
B.Non-Stop SCSI host
C.Postponed SCSI path
D.Skip SCSI microprocessor
E.Skip SCSI channel adapter
ANSWER: ABE

Hitachi参考書   HH0-210   HH0-210

NO.6 You install a temporary license for a specific feature.
How long is the feature available on a Hitachi Enterprise storage system?
A.45 days
B.90 days
C.120 days
D.180 days
ANSWER: C

Hitachi   HH0-210参考書   HH0-210   HH0-210問題集

NO.7 You are connecting a Hitachi AMS2000 Family (AMS) system as external storage behind a Hitachi
Universal Storage Platform V. You are using one path to each controller on the AMS2000 system.
Which statement describes how to complete the configuration?
A.Enable intermittent error monitoring for both paths.
B.Set path mode to "Multi".
C.No special setting is needed.
D.Set the primary path to point to the AMS default controller.
ANSWER: C

Hitachi認定資格   HH0-210   HH0-210認定試験   HH0-210認定資格

NO.8 After completing a Hitachi Universal Storage Platform V installation or before upgrading the microcode,
which tool must you use to ensure that the SVP can communicate with all components of the system?
A.ping
B.traceroute
C.a network sniffer
D.diags LAN TEST
ANSWER: D

Hitachi   HH0-210練習問題   HH0-210認証試験   HH0-210認証試験   HH0-210   HH0-210

NO.9 Which three factors must be considered when planning a Non-stop SCSI microcode exchange on a
Universal Storage Platform V? (Choose three.)
A.Force production host data paths to failover to the alternate cluster.
B.Schedule a time when the I/O workload is low.
C.Confirm that all LUNs, external storage, and remote replication links have multiple paths across both
clusters.
D.Save the contents of the shared memory to the SVP hard disk.
E.Ensure that the microprocessors are less than 50 percent busy.
ANSWER: BCE

Hitachi過去問   HH0-210   HH0-210認証試験   HH0-210練習問題   HH0-210

NO.10 You are installing a new Hitachi Universal Storage Platform V system and need to exchange the short
wave SFP transceivers with the long wave type.
To perform the exchange, which two actions are required? (Choose two.)
A.Confirm successful replacement by checking that SFP indicators have changed from blue to green on
the Storage Navigator main screen.
B.Run the SFP exchange wizard.
C.Set SFP mode on the SVP.
D.Confirm successful replacement by checking 'SFP kind' information on the maintenance screen.
ANSWER: CD

Hitachi   HH0-210   HH0-210問題集   HH0-210

NO.11 Which ShadowImage operation is permitted when using Storage Navigator?
A.Manage pairs and manage consistency groups
B.Manage pairs but not manage consistency groups
C.Manage pairs only within consistency groups
D.Manage pairs in journal groups
ANSWER: B

Hitachi参考書   HH0-210   HH0-210認定試験   HH0-210認定資格   HH0-210認証試験

NO.12 You have created a Storage Device List and some User Accounts within Storage Navigator. The SVP
has since failed and must be replaced.
How can you create a backup of this information so it can be easily restored after the failed SVP is
replaced?
A.Restore the ghost image available on the SVP.
B.Use HiSat to keep track of the information in a CSV format.
C.Ask the customer engineer to copy the source files from the SVP.
D.Use the download configuration function of the Storage Navigator control panel.
ANSWER: D

Hitachi   HH0-210   HH0-210過去問   HH0-210認定証

NO.13 Which two steps must be taken when performing a microcode exchange on a Hitachi Universal
Storage Platform VM? (Choose two.)
A.Disconnect the SVP from the customer LAN.
B.Confirm that all components are at the correct starting code level.
C.Update SVP microcode last.
D.Resolve all SIMS before beginning a microcode exchange.
ANSWER: BD

Hitachi   HH0-210練習問題   HH0-210   HH0-210

NO.14 What information is displayed on the Information tab page of Storage Navigator? (Choose two.)
A.the device view of the connected system
B.the product name of the connected system
C.the information for the root user of the connected device
D.the microcode version of the storage system
ANSWER: BD

Hitachi認定資格   HH0-210参考書   HH0-210問題集   HH0-210

NO.15 A TrueCopy project has the following requirements: Copy from site_A (Host_A) to site_B (Host_B).
You have defined two instances (horcm0.conf and horcm1.conf) for the application and one Command
Device (CMD_A on site_A and CMD_B on site_B.)
What are two valid combinations of distributing the instances and defining access to the Command
Devices on the different sites? (Choose two.)
A.Host_A has access to CMD_A and CMD_B and runs horcm0.conf and horcm1.conf.
B.Host_A has access to CMD_A and runs horcm0.conf. Host_B has access to CMD_A and runs
horcm1.conf.
C.Host_A has access to CMD_A and runs horcm0.conf. Host_B has access to CMD_B and runs
horcm1.conf.
D.Host_A has access to CMD_B and runs horcm0.conf. Host_B has access to CMD_B and runs
horcm1.conf.
ANSWER: AC

Hitachi   HH0-210認証試験   HH0-210参考書   HH0-210   HH0-210

NO.16 To which two LANs must the SVP of a Hitachi Universal Storage Platform V be attached? (Choose two.)
A.customer's intranet
B.USP V internal LAN
C.HiTrack dedicated user port
D.secure management LAN
ANSWER: BD

Hitachi練習問題   HH0-210   HH0-210   HH0-210認定資格   HH0-210

NO.17 What is the purpose of the System Assurance Document?
A.to ensure accurate and complete record of pre-installation data
B.to guarantee that HDS equipment is insured during transportation
C.to inform a channel partner that equipment is available for shipment
D.to validate configuration changes for customers with a premium service contract
ANSWER: A

Hitachi練習問題   HH0-210   HH0-210   HH0-210問題集   HH0-210   HH0-210

NO.18 When is a microcode exchange process complete on a Hitachi Universal Storage Platform V?
A.When the message "An exchange of a microprogram finished" is displayed.
B.When all I/O resumes across all the mapped storage paths.
C.Once the SVP has rebooted.
D.When all the microprocessors flash memory update is complete.
ANSWER: D

Hitachi   HH0-210認定証   HH0-210   HH0-210問題集   HH0-210

NO.19 Which three statements describe the Service Processor (SVP) of the Hitachi Universal Storage
Platform VM? (Choose three.)
A.The SVP does have a display and keyboard.
B.The SVP has access to user data stored on the system.
C.Connecting the SVP with a service center enables remote maintenance of the system.
D.The SVP collects performance data for all key components of the system.
E.The SVP enables the service representative to configure, maintain and upgrade the system.
ANSWER: CDE

Hitachi練習問題   HH0-210参考書   HH0-210参考書

NO.20 A customer is using a Hitachi Enterprise storage system with clustered servers in an active/passive
relationship.
What must be done in Hitachi Dynamic Link Manager (HDLM) to ensure that the status of inactive paths
on both passive and active nodes is monitored regularly?
A.Switch on Auto failback.
B.Setup intermittent Error Monitoring.
C.Switch on Path Health Check.
D.Set the reservation level to 2.
ANSWER: C

Hitachi練習問題   HH0-210   HH0-210   HH0-210   HH0-210問題集

JapanCertは当面最新のHitachiのHH0-210の認証試験の準備問題を提供している認証された候補者のリーダーです。弊社の資源はずっと改訂され、アップデートされていますから、緊密な相関関係があります。HitachiのHH0-210の認証試験を準備しているあなたは、自分がトレーニングを選んで、しかも次の問題を受かったほうがいいです。弊社の試験問題はほとんど毎月で一回アップデートしますから、あなたは市場で一番新鮮な、しかも依頼できる良い資源を得ることができることを保証いたします。